Novel protein positioning technique improves functionality of yeast cells

January 16, 2020

A research team at Kobe University has developed a method of artificially controlling the anchorage position of target proteins in engineered baker's yeast (Saccharomyces cerevisiae).

The group, consisting of academic researcher INOKUMA Kentaro, Professor HASUNUMA Tomohisa (both of the Engineering Biology Research Center) and Professor KONDO Akihiko et al. (of the Graduate School of Science, Technology and Innovation) demonstrated that this technique could be utilized to improve the amount of ethanol produced from hydrothermally-processed rice straw by 30%. It is expected that these results will contribute to improved yeast functionality in cell surface engineering, which is utilized in a variety of fields such as bio-production and medicine.

The journal paper for this research was published in Metabolic Engineering on November 9 2019. This study was conducted in collaboration with researchers from the University of the Western Cape and Stellenbosch University under the JSPS (Japan Society for the Promotion of Science) bilateral program with South Africa. The research was also carried out as part of Kobe University and MEXT's 'Innovative BioProduction Kobe' project, and was supported by JSPS KAKENHI grant number JP18K05554.

Research Background

Cell surface engineering is a technique with applications in a variety of industrial and biotechnological fields. This technique can create microorganisms that can degrade biomass efficiently, allowing biofuels to be produced. In medical fields, cell surface engineering can also be utilized for the screening of antibodies with high antigen-binding capacity. Baker's yeast (or Saccharomyces cerevisiae) is often used as a host microorganism for this technique because its characteristics are well understood. This yeast has a cell wall that is between 100-200 nm thick and consists of a microfibrillar array of glucan chains. The cell wall provides space to display functional proteins.

In order to immobilize a target protein to the yeast cell wall, it is necessary to fuse the target protein to the "anchoring domain", which is a part of the yeast cell wall protein. Selecting the appropriate anchoring domain is important for efficient cell-surface display. A previous study by Inokuma et al. found that the degree to which activity was improved through changing the anchoring domain varied greatly depending on the target protein displayed. From these previous results, the research group hypothesized that changing the anchoring domain affected not only the display efficiency but also the anchorage position of the target protein in the cell wall and conducted the current study to verify this hypothesis.

Research Methodology

The experiments were conducted using the two anchoring domains (the Sed1-anchor and Sag1-anchor) often utilized in Saccharomyces cerevisiae cell surface engineering. Enhanced green fluorescence protein (eGFP) was used as the target protein. Confocal fluorescence microscopic and immunoelectron-microscopic analyses were performed to investigate how the anchoring domains affected where the eGFP was localized in yeast cell. These analyses revealed that the eGFP that fused with the Sed-1 anchoring domain were mainly located on the outermost layer of the cell wall, whereas the Sag1-anchored eGFP were predominantly positioned inside the cell wall (Figure 1). This result suggested that it was possible to artificially manipulate the location of the proteins on the yeast cell wall by changing the fused anchoring domain.

Next, an experiment was carried out to demonstrate if this method could be utilized to increase the ethanol productivity from hydrothermally-processed rice straw.Saccharomyces cerevisiaecells were used in the simultaneous saccharification and fermentation of the pretreated rice straw. This process converts the cellulose contained in the rice straw into ethanol. In this experiment, β-glucosidase (BGL) and endoglucanase (EG) were displayed on the yeast cell surface. These enzymes play different roles in breaking down the cellulose. EG breaks down large cellulose molecules at random, whereas BGL dissolves the smaller sugars (oligosaccharide) into glucose. Sed1- and Sag1-anchor domains were used to reposition the enzymes- with EG on the outermost layer and BGL on the interior of the cell wall. This efficient positioning resulted in a 30% greater yield of ethanol (Figure 2).

Further Development

Discussions on how to improve cell surface engineering efficiency have often centered on anchoring a large number of target proteins to the surface. The current study revealed that controlling the location of the target proteins played an important role in cell functionality, and this could provide a new strategy for improving this technology. The ethanol fermentation experiment of pretreated rice straw demonstrated in this study indicates that it is possible to position the two enzymes (EG and BGL) in locations suitable for them in the yeast cell wall. In addition, this strategy could also be utilized in other applications; for example in medicine, placing antibodies on the outermost layer of the cell wall could improve their accessibility to large antigens. Therefore, it is expected that this new strategy will improve the functionality of cell-surface engineered yeast across a wide range of fields.

Kobe University

Related Ethanol Articles from Brightsurf:

Spraying ethanol to nanofiber masks makes them reusable
A joint research team from POSTECH and Japan's Shinshu University evaluates the filtration efficiency of nanofiber and melt-blown filters when cleaned with ethanol.

Anaerobically disinfect soil to increase phosphorus using diluted ethanol
Anaerobic disinfection of soil is an effective method to kill unwanted bacteria, parasites and weeds without using chemical pesticides.

Fractionation processes can improve profitability of ethanol production
The US is the world's largest producer of bioethanol as renewable liquid fuel, with more than 200 commercial plants processing over 16 billion gallons per year.

Ethanol fuels large-scale expansion of Brazil's farming land
A University of Queensland-led study has revealed that future demand for ethanol biofuel could potentially expand sugarcane farming land in Brazil by 5 million hectares by 2030.

Measuring ethanol's deadly twin
ETH Zurich researchers have developed an inexpensive, handheld measuring device that can distinguish between methanol and potable alcohol.

Modified enzyme can increase second-generation ethanol production
Using a protein produced by a fungus that lives in the Amazon, Brazilian researchers developed a molecule capable of increasing glucose release from biomass for fermentation.

Scientists develop a chemocatalytic approach for one-pot reaction of cellulosic ethanol
Scientists at the Dalian Institute of Chemical Physics (DICP) of the Chinese Academy of Sciences have developed a chemocatalytic approach to convert cellulose into ethanol in a one-pot process by using a multifunctional Mo/Pt/WOx catalyst.

New core-shell catalyst for ethanol fuel cells
Scientists at Brookhaven Lab and the University of Arkansas have developed a highly efficient catalyst for extracting electrical energy from ethanol, an easy-to-store liquid fuel that can be generated from renewable resources.

Yeast makes ethanol to prevent metabolic overload
Why do some yeast cells produce ethanol? Scientists have wondered about this apparent waste of resources for decades.

Corncob ethanol may help cut China's greenhouse gas emissions
A new Biofuels, Bioproducts and Biorefining study has found that using ethanol from corncobs for energy production may help reduce greenhouse gas emissions in China, if used instead of starch-based ethanol.

Read More: Ethanol News and Ethanol Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to