ASU receives 2 grants to develop new types of solar cells

January 23, 2008

TEMPE, Ariz. - Two grants to Arizona State University for development of new solar energy technologies show how ASU's solar energy research has grown in new and important ways. The grants, from the U.S. Department of Energy's (DOE) Solar America Initiative, are for basic research into new solar cell materials that could lead to efficiency gains and lower costs for the technology.

Each grant focuses on developing new materials like those that have been used in advanced semiconductors and applying them to solar energy. They bring to five the number of major solar energy grants ASU has garnered from the DOE in less than a year.

"These two latest grants deal with fundamental research questions and should lead to longer term solar energy solutions," said Jonathan Fink, director of ASU's Global Institute for Sustainability. "We are one of only four universities to receive more than one of these prestigious awards -- along with MIT, Stanford and Penn State."

Six universities received the majority of DOE awards for solar technology research during the past year: MIT has six; ASU five; University of Delaware five; Stanford, Cal Tech, and University of Colorado, each with three.

"This shows that ASU is emerging as a very strong competitor in solar energy technology," said Stephen Goodnick, ASU associate vice president for research. "We are the only school in the Southwest to receive a Solar America Initiative grant in either of the first two rounds of awards."

The Solar America Initiative (SAI) is a DOE effort to accelerate the development of advanced solar energy technologies. The strategy is to pursue complementary activities in the research and development of solar technologies to reduce costs and eliminate barriers to commercialization.

In the first round of SAI awards, ASU won two grants to work with industry partners and help lower the costs of producing and distributing solar energy, bringing its costs more in line with conventional energy sources. DOE also awarded ASU a Basic Energy Sciences grant (to Ian Gould, a professor in chemistry and biochemistry) for a solar energy project last year.

The two new grants in the latest SAI round are geared towards advancing new materials that can be used in photovoltaic solar cells, with a goal of having prototypes developed by 2015 and commercialized by 2020 to 2030.

One SAI grant, for $1.3 million, will go to a team headed by John Kouvetakis, a professor in chemistry and biochemistry, and Jose Menendez, a professor in physics. The project will explore the photovoltaic potential of new materials that were originally developed for laser applications. The project promises dramatic cost reductions compared to current technologies.

"The materials we are using have been developed at ASU over the past five years for silicon-based photonic devices," said Kouvetakis. "The application of these materials in photovoltaics is an extension of our previous work."

Kouvetakis added that the goal of the project is to advance silicon-based solar cells, which currently account for 90 percent of all commercial solar devices, and to use materials the researchers are familiar with from their semiconductor work. The new material combinations will feature enhanced absorption of sunlight by perfectly matching the solar energy spectrum. The ASU researchers are teaming up with ASM America Inc., and EpiWorks Inc., in the project.

The second SAI grant is for $1.14 million and goes to a team headed by Mark van Schilfgaarde, a professor in the School of Materials. That project will focus on developing "tandem cell" solar cells where two-material combinations are brought together to most efficiently utilize solar energy. Once again, the materials that are being explored were originally studied at ASU for their semiconductor applications.

The researchers will grow thin films of these materials, which will then be fabricated into photovoltaic devices, van Schilfgaarde said. There are advantages to this route, he added.

"The tandem cell approach puts one type of material on the top of the cell and a different material on the bottom. That way the top and bottom absorb different wavelengths of light," he said. "So you get a bigger bang for the buck."

The ASU team will explore materials other than silicon. Van Schilfgaarde said silicon-processing methods are typically very expensive, as are thin film approaches that rely on rare elements. His new method will use abundant materials like zinc, selenium, phosphorous and germanium. Because they use only thin films of the materials, measuring only microns thick, they can keep production costs relatively low.

"Use of abundant materials is a key," van Schilfgaarde explained. "Use of high quality semiconductor materials also is essential, because photovoltaics need to be defect free in order to be reasonably efficient. We figure if we can get to 20 percent efficiency in three years then it will be a game changer." The best commercial technologies currently get about 15 percent efficiency.

"These grants show that ASU is building a broad and diverse portfolio in solar energy related research activities, taking advantage of our strengths in materials characterization and fabrication, flexible display technology, power systems engineering, photovoltaic testing and evaluation, energy efficient architecture, urban design, decision science and resource economics," Fink said of the recent SAI grants. "Most important is that we are able to bring all of the people together and have them strategize as a group."
-end-
Sources:
Jonathan Fink, (480) 965-4797
Stephen Goodnick, (480) 965-1225
John Kouvetakis, (480) 965-0628
Mark van Schilfgaarde, (480) 965-4977

Arizona State University

Related Solar Cells Articles from Brightsurf:

Solar cells of the future
Organic solar cells are cheaper to produce and more flexible than their counterparts made of crystalline silicon, but do not offer the same level of efficiency or stability.

A blast of gas for better solar cells
Treating silicon with carbon dioxide gas in plasma processing brings simplicity and control to a key step for making solar cells.

Record efficiency for printed solar cells
A new study reports the highest efficiency ever recorded for full roll-to-roll printed perovskite solar cells.

Next gen solar cells perform better when there's a camera around
A literal ''trick of the light'' can detect imperfections in next-gen solar cells, boosting their efficiency to match that of existing silicon-based versions, researchers have found.

On the trail of organic solar cells' efficiency
Scientists at TU Dresden and Hasselt University in Belgium investigated the physical causes that limit the efficiency of novel solar cells based on organic molecular materials.

Exciting tweaks for organic solar cells
A molecular tweak has improved organic solar cell performance, bringing us closer to cheaper, efficient, and more easily manufactured photovoltaics.

For cheaper solar cells, thinner really is better
Researchers at MIT and at the National Renewable Energy Laboratory (NREL) have outlined a pathway to slashing costs further, this time by slimming down the silicon cells themselves.

Flexible thinking on silicon solar cells
Combining silicon with a highly elastic polymer backing produces solar cells that have record-breaking stretchability and high efficiency.

Perovskite solar cells get an upgrade
Rice University materials scientists find inorganic compounds quench defects in perovskite-based solar cells and expand their tolerance of light, humidity and heat.

Can solar technology kill cancer cells?
Michigan State University scientists have revealed a new way to detect and attack cancer cells using technology traditionally reserved for solar power.

Read More: Solar Cells News and Solar Cells Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.