Sensor sensibility -- better protection for concrete coastal structures

January 25, 2012

Innovative sensors have been developed that will dramatically improve the ability to spot early warning signs of corrosion in concrete.

More resilient and much longer lasting than traditional corrosion sensors they will make monitoring the safety of structures such as bridges and vital coastal defences much more effective.

The carbon steel bars used to reinforce submerged concrete in tidal zone areas are at particular risk of corrosion caused by wet conditions*.

The breakthrough has been made by researchers based at City University London and Queen's University Belfast following several research projects funded by the Engineering and Physical Sciences Research Council (EPSRC).

Because the sensors can withstand long-term placement within concrete - unlike any equivalent sensors currently available - they can constantly monitor conditions, enabling a warning to be sent when conditions for corrosion threshold have been crossed.

Thanks to an internet connection, the notification can be sent in the form of an email or text to the structure's maintenance team.

A trio of novel, robust probes is at the heart of the team's work: one that monitors temperature, one for humidity while the other senses chloride and pH levels. Changes in these factors indicate the onset of the potentially destructive corrosion. Within the probes are advanced optical sensors specifically designed and built for this project in City's laboratories. These have been patented for potential commercial exploitation.

Tong Sun, Professor of Sensor Engineering at City and Principal Investigator on the project says: "Key to this successful prototype is our monitoring the variation of the sensor signals of a sample as an indicator of corrosion levels. This means we can use optical sensors made of polymer, which is much more resistant to the high alkaline environments of these structures than sensors currently on the market."

Traditional optical corrosion sensors have only a limited lifetime, usually of several weeks, because of the corrosive alkaline levels within concrete. The new sensors are expected to last for several years, with proper protection, even where pH levels are higher than 12. For comparison, domestic bleach has a pH value of between 12 and 13.

"Our design means several probes can be installed semi-permanently in a structure and then connected to a computer data logger, which will constantly collect readings.

This can be left until the readings indicate conditions have changed enough to warrant a full investigation. Remedial work will be simpler, cheaper and more effective at this stage, rather than waiting until there is visible damage, such as parts of the concrete coming away," said Professor Sun.
-end-
Notes for editors

The four-year project 'Corrosion Monitoring Systems for Structures in Extreme Marine Environments', began on 31 March 2006 and concluded on 30 March 2010. It received EPSRC funding of £243,145 to City University London and £244,788 to Queen's University Belfast.

The success of the sensor development and its potential value to industry means the research team were also awarded a follow on grant by the EPSRC (£110,125 to City and £65,318 to Queen's University Belfast) to explore the commercial potential of these sensors. This project will see further improvement on the sensor design, especially chloride sensors and their subsequent testing of the probes which will then be put forward for the patent update before being made available for next-stage commercial exploitation.

The integrity of marine structures can face serious risks from a combination of chemical, biological and physical actions presented by the sea. The cost to the owners in the event of a failure can amount to millions of pounds annually for repair, replacement and for removing any sections that have fallen into surrounding water.

*In structures such as bridges it is the steel rebar embedded in the concrete that is at risk of corrosion: most at risk are the tidal and splash zones which experience continual wetting and drying.

Seawater contains a cocktail of dissolved inorganic material of which the chloride ion plays a major role in the corrosion of marine structures. This applies to the air above water as well as in the splash zone and below the surface.

The sensors within the temperature and humidity probe utilise the fibre Bragg grating. A fibre Bragg grating is a type of reflector made of a length of optical fibre that only reflects specific wavelengths of light while transmitting all others. This is created, usually by ultraviolet laser treatment, which alters the fibre core's refractive index. A pair of gratings, with one being coated with a polymer layer, was used to separate the temperature and humidity parameters.

Due to the commercial sensitivity of the design, details of the sensors inside the chloride / pH probe are not being disclosed. But it can be revealed that it is capable of measuring free chloride concentrations as low as 20 millimoles per litre (a mole is a unit measuring the concentration of a substance by counting the number of atoms or molecules in it).

Engineering and Physical Sciences Research Council (EPSRC)

The Engineering and Physical Sciences research Council (EPSRC) is the UK's main agency for funding research in engineering and the physical sciences. EPSRC invests around £800m a year in research and postgraduate training, to help the nation handle the next generation of technological change. The areas covered range from information technology to structural engineering, and mathematics to materials science. This research forms the basis for future economic development in the UK and improvements for everyone's health, lifestyle and culture. EPSRC works alongside other Research Councils with responsibility for other areas of research. The Research Councils work collectively on issues of common concern via Research Councils UK. . www.epsrc.ac.uk

City University London

City University London is an international university with a commitment to academic excellence, a focus on business and the professions and a central London location. It is placed in the top 5% of universities around the world by the Times Higher Education World University Rankings 2010-11 and is ranked in the top 30 UK higher education institutions by the Times Higher Education Table of Tables 2011. The University's Student Centre holds the 2011 Times Higher Education Leadership & Management Award for Outstanding Student Services Team. City is a broadly-based university with world leading strengths in business; law; engineering and mathematical sciences; informatics; health sciences and the arts including journalism and music. The University attracts over 21,000 students from more than 160 countries and academic and professional staff from over 50 countries. City University London's predecessor, the Northampton Institute, was founded in 1894. City will celebrate its first half century as a university in 2016. www.city.ac.uk

Queen's University Belfast

A member of the Russell Group of the UK's 20 leading research-intensive universities, Queen's University has gained global recognition for the impact of its research and education. The institution has won five Queen's Anniversary Prizes for Further and Higher Education - for world-class achievement in cancer research, green chemistry, environmental research, palaeoecology and law.

Four prestigious Times Higher Education (THE) Awards further recognise the University's contribution to society. Queen's received the award for Excellence and Innovation in the Arts in 2008, was awarded the title of the UK's Entrepreneurial University of the Year in 2009, the Outstanding Engineering Research Team of the Year in 2010 and Most Innovative Teacher of the Year in 2011.

Founded as Queen's College in 1845, Queen's became a university in its own right in1908. An international centre of research and education rooted at the heart of Northern Ireland, it offers a life-changing student experience to students from more than 80 countries. Queen's is a magnet for inward investment, a patron of the arts and a global player in areas ranging from cancer studies to sustainability, and from pharmaceuticals to creative writing. www.qub.ac.uk

For further information contact:
Professor Tong Sun, at City University London, tel: 020 7040 8128, e-mail: t.sun@city.ac.uk
Dr Su Taylor, at Queen's University Belfast, tel: 028 9097 4010, e-mail: s.e.taylor@qub.ac.uk

Images are available from the EPSRC Press Office, e-mail: pressoffice@epsrc.ac.uk, tel: 01793 444404.

Engineering and Physical Sciences Research Council

Related Engineering Articles from Brightsurf:

Re-engineering antibodies for COVID-19
Catholic University of America researcher uses 'in silico' analysis to fast-track passive immunity

Next frontier in bacterial engineering
A new technique overcomes a serious hurdle in the field of bacterial design and engineering.

COVID-19 and the role of tissue engineering
Tissue engineering has a unique set of tools and technologies for developing preventive strategies, diagnostics, and treatments that can play an important role during the ongoing COVID-19 pandemic.

Engineering the meniscus
Damage to the meniscus is common, but there remains an unmet need for improved restorative therapies that can overcome poor healing in the avascular regions.

Artificially engineering the intestine
Short bowel syndrome is a debilitating condition with few treatment options, and these treatments have limited efficacy.

Reverse engineering the fireworks of life
An interdisciplinary team of Princeton researchers has successfully reverse engineered the components and sequence of events that lead to microtubule branching.

New method for engineering metabolic pathways
Two approaches provide a faster way to create enzymes and analyze their reactions, leading to the design of more complex molecules.

Engineering for high-speed devices
A research team from the University of Delaware has developed cutting-edge technology for photonics devices that could enable faster communications between phones and computers.

Breakthrough in blood vessel engineering
Growing functional blood vessel networks is no easy task. Previously, other groups have made networks that span millimeters in size.

Next-gen batteries possible with new engineering approach
Dramatically longer-lasting, faster-charging and safer lithium metal batteries may be possible, according to Penn State research, recently published in Nature Energy.

Read More: Engineering News and Engineering Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.