Nav: Home

Study sheds light on alternative, more convenient method of cell preservation

January 25, 2018

CORVALLIS, Ore. - Researchers at Oregon State University have taken an important step toward a more convenient, less expensive means of preserving mammalian cells for in vitro fertilization, species conservation, cell therapy and other purposes.

The method is desiccation - removing water from cells - and shows promise as an alternative to cryopreservation via liquid nitrogen.

Findings were recently published in PLOS One.

Liquid nitrogen's boiling point is minus 320 degrees Fahrenheit, whereas desiccated cells might be stored in conventional freezers or refrigerators.

"Storage in liquid nitrogen is relatively costly and the requirement for low temperatures during shipping is inconvenient," said corresponding author Adam Higgins, associate professor of bioengineering at OSU.

Getting cells stable for storing in a dried state requires removing enough water that the remaining matrix forms a non-crystalline, glassy solid.

"One of the most important performance characteristics of a desiccation solution is its ability to form that glass," Higgins said. "That's what locks the molecular structure in place and prevents degradative chemical reactions. So the glass transition temperature - the point at which the glassy solid forms - is a key parameter for the design of cell desiccation procedures. That temperature is ultimately what determines a biospecimen's appropriate storage temperature."

Higgins worked with collaborators in the OSU College of Engineering and at Augusta University and Villanova University to look at the glass transition temperatures of various possible desiccation media and how moisture content affected the temperatures.

"Our intent was to take a step toward understanding the glass transition temperatures of these mixes, and we definitely did that," he said.

They studied aqueous solutions of sugars and polymers, as well as compounds that can permeate the cell membrane and are used in cryopreservation: ethylene glycol, propylene glycol and dimethyl sulfoxide, or DMSO.

Researchers dried the solutions to different moisture contents and then measured the glass transition temperatures using differential scanning calorimetry.

"Glass transition data for complex, multicomponent solutions are relatively scarce," Higgins said. "But as we expected, the glass transition temperatures increased with decreasing moisture content."

For example, in a medium containing 0.1 molarity trehalose in phosphate buffered saline, the temperature ranged from about 360 degrees Kelvin for a completely dry sample to about 220 Kelvin at a water mass fraction of 0.4. Zero degrees Kelvin is absolute zero, equal to minus 273.15 Celsius.

"Adding polymers to the solutions increased the glass transition temperature," he said. "Adding penetrating cryoprotectants decreased it."

In general, researchers found the polymers they used - polyvinylpyrrolidone (PVP) and Ficoll - had a stabilizing effect; adding them to a desiccation medium containing trehalose and phosphate buffered saline increased the glass transition temperature significantly at any moisture content.

Adding DMSO, ethylene glycol or propylene glycol to the mixture decreased the glass transition temperature in a manner that depended on concentration.

"For stable storage in the dried state, it's believed the glass transition temperature should be about 50 degrees Kelvin above the storage temperature," Higgins said. "So a desiccation solution containing 0.1 molarity trehalose and 10 percent PVP in phosphate buffered saline would need to be dried to a water mass fraction of about 5 percent for stable storage at room temperature. For storage in a refrigerator, drying to about 9 percent water content would be sufficient. Adding membrane-permeable cryoprotectants can safeguard intracellular organelles but increases the extent of drying necessary."

Results suggest room-temperature storage of a desiccation solution containing 0.25 molarity cryoprotectants is not feasible. But it appears possible for such a solution to achieve stable storage in a standard refrigerator or freezer after drying to water mass fractions of about 3 percent and 6 percent, respectively.

"These examples illustrate the potential of our results to facilitate design of promising multicomponent mixtures for cell desiccation," Higgins said.
The National Institute of Biomedical Imaging and Bioengineering supported this research.

Oregon State University

Related Polymers Articles:

Oyster shells inspire new method to make superstrong, flexible polymers
Columbia Engineers developed a method inspired by the nacre of oyster shells, a composite material with extraordinary mechanical properties, including great strength and resilience.
The brighter side of twisted polymers
A strategy to produce highly fluorescent nanoparticles through careful molecular design of conjugated polymers has been developed by KAUST researchers.
New strategy produces stronger polymers
MIT researchers have found a way to reduce the number of loops in polymer networks such as gels, plastics, and rubber.
Team highlights work on tuning block polymers for nanostructured systems
High-performance materials are enabling major advances in a wide range of applications from energy generation and digital information storage to disease screening and medical devices.
Estimating the glass transition temperature for polymers in 'confined geometries'
Polystyrene has a glass transition temperature of about 100 C -- at room temperature it behaves like a solid material.
Rapid Imaging of Polymers Could Lead to Better Bioimaging
A recent study by researchers at the Beckman Institute for Advanced Science and Technology at the University of Illinois identifies a method of Quantum Cascade Laser-based (QCL) infrared spectroscopic imaging that provides a more rapid method than conventional Fourier transform infrared imaging (FT-IR) to examine spherulites, large semicrystalline polymer samples, in order to identify chemical and structural properties.
Macromolecules: Light to design precision polymers
Chemists of Karlsruhe Institute of Technology have succeeded in specifically controlling the setup of precision polymers by light-induced chemical reactions.
International engineering team develop self-powered mobile polymers
n international group involving Inha University, University of Pittsburgh and the Air Force Research Laboratory has built upon their previous research and identified new materials that directly convert ultraviolet light into motion without the need for electronics or other traditional methods.
'Bottlebrush' polymers make dielectric elastomers increasingly viable for use in devices
A multi-institutional research team has developed a new electroactive polymer material that can change shape and size when exposed to a relatively small electric field.
NIST-made 'sun and rain' used to study nanoparticle release from polymers
In a recently published paper, researchers from the National Institute of Standards and Technology (NIST) describe how they subjected a commercial nanoparticle-infused coating to NIST-developed methods for accelerating the effects of weathering from ultraviolet (UV) radiation and simulated washings of rainwater.

Related Polymers Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Failure can feel lonely and final. But can we learn from failure, even reframe it, to feel more like a temporary setback? This hour, TED speakers on changing a crushing defeat into a stepping stone. Guests include entrepreneur Leticia Gasca, psychology professor Alison Ledgerwood, astronomer Phil Plait, former professional athlete Charly Haversat, and UPS training manager Jon Bowers.
Now Playing: Science for the People

#524 The Human Network
What does a network of humans look like and how does it work? How does information spread? How do decisions and opinions spread? What gets distorted as it moves through the network and why? This week we dig into the ins and outs of human networks with Matthew Jackson, Professor of Economics at Stanford University and author of the book "The Human Network: How Your Social Position Determines Your Power, Beliefs, and Behaviours".