The laser pulse that gets shorter all by itself

January 27, 2015

In a marathon, everyone starts at roughly the same place at roughly the same time. But the faster runners will gradually increase their lead, and in the end, the distribution of runners on the street will be very broad. Something similar happens to a pulse of light sent through a medium. The pulse is a combination of different colours (or different wavelengths), and when they are sent through a medium like glass, they travel at slightly different speeds. This leads to a dispersion effect: the pulse becomes longer and longer.

But there are ways to reverse this. It is possible to use a medium to make a laser pulse shorter. Scientists at the Vienna University of Technology have found a way to compress intense laser pulses by a factor of 20 to just 4.5, just by sending them through a cleverly designed hollow fibre. The compressed laser pulse only consists of a single oscillation of light. This tabletop technology is much simpler and cheaper than previously used complicated setups. It has now been published in "Nature Communications".

Hollow Fibre Filled with Gas

An infrared laser pulse is sent into a hollow fibre filled with gas. The nonlinear interaction between the light and the gas atoms in the special fibre makes different wavelengths travel at different velocities. The components with longer wavelengths travel faster than the short wavelength components. Inside the fibre, however, there is a carefully designed nanostructure, which allows short wavelengths to travel through the fibre faster than longer ones.

The combination of these two opposing effects leads to a compression of the laser pulse. It is like sending off a long line of marathon runners and in the end have them all arrive at the finish line simultaneously. The resulting pulse is not only short but also extremely intense: it reaches a peak power of one gigawatt.

The nanostructure inside the fibre is called "Kagome", which is Japanese for "basket weave". This special fibre that allows undistorted transmission of these extremely short pulses was designed and fabricated by the research group of Fetah Benabid at Limoges University, France.

For years, extremely short infrared laser pulses have been used to unravel the secrets of the quantum world. They can rip electrons away from their atoms, they can accelerate electrons, they can help to monitor the dynamics of chemical reactions. Up until now, complicated setups had to be used to create these femtosecond laser pulses.

Usually, the different wavelengths of the pulse have to be manipulated with intricate mirror systems to compress the pulse. This simple pulse compression method should make it much easier and cheaper for laboratories all around the world to create single-cycle infrared pulses and is a key step for generating even shorter, the attosecond pulses.

New Tool for Further Research

In their recent publication, the researchers at the Vienna University of Technology have already demonstrated that their laser pulses can be used for highly advanced experiments: they focused the pulse onto a target of xenon gas, ionizing the xenon atoms. Depending on the exact shape of the laser pulse, the electrons ripped away from the xenon atoms can be sent into different directions. "It is an ultrafast electron switch", says Tadas Balciunas.

The photonics team at the Vienna University of Technology is planning to use this new technology for a variety of measurements in the future and expects other research groups around the world to pick up this idea. Having a femtosecond laser system which is cheap, small and easy to use could turn out to be a boost for attosecond science and ultrafast laser research in general.
-end-
Further Information:
Dr. Tadas Balciunas
Photonics Institute
Vienna University of Technology
Gusshausstraße 25-29, 1040 Wien
+43-1-58801-38777
tadas.balciunas@tuwien.ac.at

Vienna University of Technology

Related Chemical Reactions Articles from Brightsurf:

Shedding light on how urban grime affects chemical reactions in cities
Many city surfaces are coated with a layer of soot, pollutants, metals, organic compounds and other molecules known as ''urban grime.'' Chemical reactions that occur in this complex milieu can affect air and water quality.

Seeing chemical reactions with music
Audible sound enables chemical coloring and the coexistence of different chemical reactions in a solution.

Nanocatalysts that remotely control chemical reactions inside living cells
POSTECH professor In Su Lee's research team develops a magnetic field-induced heating 'hollow nanoreactors'.

New NMR method enables monitoring of chemical reactions in metal containers
Scientists have developed a new method of observing chemical reactions in metal containers.

Levitating droplets allow scientists to perform 'touchless' chemical reactions
Levitation has long been a staple of magic tricks and movies.

Predicting unpredictable reactions
New research from the University of Pittsburgh's Swanson School of Engineering, in collaboration with the Laboratory of Catalysis and Catalytic Processes (Department of Energy) at Politecnico di Milano in Milan, Italy, advances the field of computational catalysis by paving the way for the simulation of realistic catalysts under reaction conditions.

First-time direct proof of chemical reactions in particulates
Researchers at the Paul Scherrer Institute PSI have developed a new method to analyse particulate matter more precisely than ever before.

Finding the source of chemical reactions
In a collaborative project with MIT and other universities, scientists at Argonne National Laboratory have experimentally detected the fleeting transition state that occurs at the origin of a chemical reaction.

Accelerating chemical reactions without direct contact with a catalyst
Northwestern University researchers demonstrate a chemical reaction produced through an intermediary created by a separate chemical reaction, findings that could impact environmental remediation and fuel production.

Visualizing chemical reactions, e.g. from H2 and CO2 to synthetic natural gas
Scientists at EPFL have designed a reactor that can use IR thermography to visualize dynamic surface reactions and correlate it with other rapid gas analysis methods to obtain a holistic understanding of the reaction in rapidly changing conditions.

Read More: Chemical Reactions News and Chemical Reactions Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.