NASA Webb Telescope mirrors installed with robotic arm precision

January 27, 2016

Inside a massive clean room at NASA's Goddard Space Flight Center in Greenbelt, Maryland the James Webb Space Telescope team is steadily installing the largest space telescope mirror ever. Unlike other space telescope mirrors, this one must be pieced together from segments using a high-precision robotic arm.

The team uses a robotic arm called the Primary Mirror Alignment and Integration Fixture to lift and lower each of Webb's 18 primary flight mirror segments to their locations on the telescope structure. Each of the mirrors is made with beryllium, chosen for its properties to withstand the super cold temperatures of space. Each segment also has a thin gold coating to reflect infrared light. These mirror segments will function as one when the telescope is in orbit.

"In order for the combination of mirror segments to function as a single mirror they must be placed within a few millimeters of one another, to fraction-of-a-millimeter accuracy. A human operator cannot place the mirrors that accurately, so we developed a robotic system to do the assembly," said NASA's James Webb Space Telescope Program Director Eric Smith, at Headquarters in Washington.

To precisely install the segments, the robotic arm can move in six directions to maneuver over the telescope structure. While one team of engineers maneuvers the robotic arm, another team of engineers simultaneously takes measurements with lasers to ensure each mirror segment is placed, bolted and glued perfectly before moving to the next.

"While the team is installing the mirrors there are references on the structure and the mirrors that allow the team to understand where the final mirror surface is located," said Harris Corporation's James Webb Space Telescope's Assembly Integration and Test Director Gary Matthews Greenbelt, Maryland.

The team uses reference points on the telescope structure called Spherically Mounted Retroreflectors to accomplish this feat. A laser tracker, similar to the ones used by surveyors, looks at those reference points and can determine where the mirror segments go.

"Instead of using a measuring tape, a laser is used to measure distance very precisely," said Matthews. "Based off of those measurements a coordinate system is used to place each of the primary mirror segments. The engineers can move the mirror into its precise location on the telescope structure to within the thickness of a piece of paper."

Harris Corporation engineers are helping build NASA's ultra-powerful James Webb Space Telescope. Harris is responsible for integrating components made by various members of the team to form the optical telescope element, which is the portion of the telescope that will collect light and provide sharp images of deep space.

The James Webb Space Telescope is the scientific successor to NASA's Hubble Space Telescope. It will be the most powerful space telescope ever built. Webb is an international project led by NASA with its partners, the European Space Agency and the Canadian Space Agency.

For more information about NASA's Webb telescope, visit:http://www.nasa.gov/webb or jwst.nasa.gov
-end-


NASA/Goddard Space Flight Center

Related Robotic Arm Articles from Brightsurf:

Research lowers errors for using brain signals to control a robot arm
Brain-computer interfaces have seen a large influx of research in an effort to allow precise and accurate control of physical systems.

Exercising one arm has twice the benefits
New research from Edith Cowan University (ECU) has revealed that training one arm can improve strength and decrease muscle loss in the other arm - without even moving it.

Mind-controlled arm prostheses that 'feel' are now a part of everyday life
For the first time, people with arm amputations can experience sensations of touch in a mind-controlled arm prosthesis that they use in everyday life.

The right thumb becomes the left arm
Researchers from Toyohashi University of Technology, University of Tokyo and Keio University have revealed that a re-association of the right thumb with the virtual left arm could be induced by visuo-motor synchronization.

The long arm of childhood conditions
Available research on the impact of a person's socioeconomic status during childhood suggests that the circumstances one grows up in matter a great deal for adult health.

New haptic arm places robotics within easy reach
Imagine being able to build and use a robotic device without the need for expensive, specialist kit or skills.

Artificial intelligence controls robotic arm to pack boxes and cut costs
Rutgers computer scientists used artificial intelligence to control a robotic arm that provides a more efficient way to pack boxes, saving businesses time and money.

Robot arm tastes with engineered bacteria
A robotic gripping arm that uses engineered bacteria to 'taste' for a specific chemical has been developed by engineers at UC Davis and Carnegie Mellon University.

First-ever successful mind-controlled robotic arm without brain implants
A team of researchers from Carnegie Mellon University has made a breakthrough in the field of noninvasive robotic device control.

Up in arms: Insect-inspired arm technology aims to improve drones
Insect-inspired arm technology from Purdue University aims to improve drones to handle larger payloads.

Read More: Robotic Arm News and Robotic Arm Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.