Nav: Home

'Goldilocks' thinking to cut cost of fuel cells in electric vehicles

February 21, 2019

WEST LAFAYETTE, Ind. -- The 2019 Toyota Mirai electric vehicle touts zero emissions, thanks to a fuel cell that runs on hydrogen instead of gasoline. But the Mirai has barely left California, partly because today's fuel cell electrodes are made of super expensive platinum.

Cutting down on the platinum would also cut costs, allowing more electric cars to hit the market.

A new method borrows some thinking from "Goldilocks" - just the right amount - for evaluating how much metal would be required for fuel cell electrodes. The technique uses the forces on a metal's surface to identify the ideal electrode thickness.

"There is exactly the right amount of metal that will give fuel cell electrodes the best properties," said Jeffrey Greeley, professor of chemical engineering at Purdue. "If they are too thick or too thin, the main reaction for deploying a fuel cell doesn't work as well, so there's sort of a Goldilocks principle here."

The study, to be published in the Feb. 22 issue of the journal Science, was a collaborative effort between Johns Hopkins University, Purdue University and the University of California at Irvine.

The researchers tested their theory on palladium, a metal very similar to platinum.

"We're essentially using force to tune the properties of thin metal sheets that make up electrocatalysts, which are part of the electrodes of fuel cells," Greeley said. "The ultimate goal is to test this method on a variety of metals."

Fuel cells convert hydrogen, combined with some oxygen, into electricity through a so-called oxygen-reduction reaction that an electrocatalyst starts. Finding exactly the right thickness stresses the surface of the electrocatalyst and enhances how well it performs this reaction.

Researchers in the past have tried using outside forces to expand or compress an electrocatalyst's surface, but doing so risked making the electrocatalyst less stable.

Instead, Greeley's group predicted through computer simulations that the inherent force on the surface of a palladium electrocatalyst could be manipulated for the best possible properties.

According to the simulations, an electrocatalyst five layers thick, each layer as thin as an atom, would be enough to optimize performance.

"Don't fight forces, use them," said Zhenhua Zheng, a Purdue postdoctoral researcher in chemical engineering, and co-first and co-corresponding author on this paper. "This is kind of like how some structures in architecture don't need external beams or columns because tensional and compressive forces are distributed and balanced."

Experiments in Chao Wang's lab at Johns Hopkins confirmed the simulation predictions, finding that the method can increase catalyst activity by 10 to 50 times, using 90 percent less of the metal than what is currently used in fuel cell electrodes.

This is because the surface force on the atomically thin electrodes tunes the strain, or distance between atoms, of the metal sheets, altering their catalytic properties.

"By tuning the material's thickness, we were able to create more strain. This means you have more freedom to accelerate the reaction you want on the material's surface," Wang said.
-end-
The study was supported by multiple entities, including the U.S. Department of Energy, National Energy Research Scientific Computing Center and the National Science Foundation.

The work aligns with Purdue's Giant Leaps celebration, acknowledging the university's global advancements made toward a sustainable economy and planet as part of Purdue's 150th anniversary. This is one of the four themes of the yearlong celebration's Ideas Festival, designed to showcase Purdue as an intellectual center solving real-world issues.

Purdue University

Related Fuel Cells Articles:

Paving the way for hydrogen fuel cells
The hype around hydrogen fuel cells has died down, but scientists have continued to pursue new technologies that could enable such devices to gain a firmer foothold.
Ruthenium rules for new fuel cells
Rice University scientists have fabricated a durable catalyst for high-performance fuel cells by attaching single ruthenium atoms to graphene.
Multifunctional catalyst for poison-resistant hydrogen fuel cells
A Kyushu University-led collaboration developed a catalyst that can oxidize both hydrogen and carbon monoxide in fuel cells.
Electrocatalyst nanostructures key to improved fuel cells, electrolyzers
Purdue University scientists' simulations have unraveled the mystery of a new electrocatalyst that may solve a significant problem associated with fuel cells and electrolyzers.
Nanoalloys 10 times as effective as pure platinum in fuel cells
A new type of nanocatalyst can result in the long-awaited commercial breakthrough for fuel cell cars.
Resilient red blood cells need fuel to adapt their shape to the environment
An international research team led by Osaka University built a novel 'Catch-Load-Launch' microfluidic device to monitor the resilience of red blood cells after being held in a narrow channel for various periods of time.
Cancer immunotherapy: Revived T cells still need fuel
Drugs targeting the PD-1 pathway are often described as 'releasing the brakes' on killer T cells.
Fuel cells with PFIA-membranes
HZB scientists have teamed up with partners of 3M Company in order to explore the water management in an alternative proton exchange membrane type, called PFIA.
New class of fuel cells offer increased flexibility, lower cost
A new class of fuel cells based on a newly discovered polymer-based material could bridge the gap between the operating temperature ranges of two existing types of polymer fuel cells, a breakthrough with the potential to accelerate the commercialization of low-cost fuel cells for automotive and stationary applications.
Pancreatic cancer cells find unique fuel sources to keep from starving
Pancreatic cancer cells avert starvation in dense tumors by ordering nearby support cells to supply them with an alternative source of nutrition.

Related Fuel Cells Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Digital Manipulation
Technology has reshaped our lives in amazing ways. But at what cost? This hour, TED speakers reveal how what we see, read, believe — even how we vote — can be manipulated by the technology we use. Guests include journalist Carole Cadwalladr, consumer advocate Finn Myrstad, writer and marketing professor Scott Galloway, behavioral designer Nir Eyal, and computer graphics researcher Doug Roble.
Now Playing: Science for the People

#530 Why Aren't We Dead Yet?
We only notice our immune systems when they aren't working properly, or when they're under attack. How does our immune system understand what bits of us are us, and what bits are invading germs and viruses? How different are human immune systems from the immune systems of other creatures? And is the immune system so often the target of sketchy medical advice? Those questions and more, this week in our conversation with author Idan Ben-Barak about his book "Why Aren't We Dead Yet?: The Survivor’s Guide to the Immune System".