Terahertz imaging of graphene paves the way to industrialisation

February 23, 2021

X-ray scans revolutionised medical treatments by allowing us to see inside humans without surgery. Similarly, terahertz spectroscopy penetrates graphene films allowing scientists to make detailed maps of their electrical quality, without damaging or contaminating the material. The Graphene Flagship brought together researchers from academia and industry to develop and mature this analytical technique, and now a novel measurement tool for graphene characterisation is ready.

The effort was possible thanks to the collaborative environment enabled by the Graphene Flagship European consortium, with participation by scientists from Graphene Flagship partners DTU, Denmark, IIT, Italy, Aalto University, Finland, AIXTRON, UK, imec, Belgium, Graphenea, Spain, Warsaw University, Poland, and Thales R&T, France, as well as collaborators in China, Korea and the US.

Graphene is often 'sandwiched' between many different layers and materials to be used in electronic and photonic devices. This complicates the process of quality assessment. Terahertz spectroscopy makes things easier. It images the encapsulated materials and reveals the quality of the graphene underneath, exposing imperfections at critical points in the fabrication process. It is a fast, non-destructive technology that probes the electrical properties of graphene and layered materials, with no need for direct contact.

The development of characterisation techniques like terahertz spectroscopy is fundamental to accelerating large-scale production, as they guarantee that graphene-enabled devices are made consistently and predictably, without flaws. Quality control precedes trust. Thanks to other developments pioneered by the Graphene Flagship, such as roll-to-roll production of graphene and layered materials, fabrication technology is ready to take the next step. Terahertz spectroscopy allows us to ramp up graphene production without losing sight of the quality.

"This is the technique we needed to match the high-throughput production levels enabled by the Graphene Flagship," explains Peter Bøggild from Graphene Flagship partner DTU. "We are confident that terahertz spectroscopy in graphene manufacturing will become as routine as X-ray scans in hospitals," he adds. "In fact, thanks to terahertz spectroscopy you can easily map even meter-scale graphene samples without touching them, which is not possible with some other state-of-the-art techniques." Furthermore, the Graphene Flagship is currently studying how to apply terahertz spectroscopy directly into roll-to-roll graphene production lines, and speed up the imaging.

Collaboration was key to this achievement. Graphene Flagship researchers in academic institutions worked closely with leading graphene manufacturers such as Graphene Flagship partners AIXTRON, Graphenea and IMEC. "This is the best way to ensure that our solution is relevant to our end-users, companies that make graphene and layered materials on industrial scales," says Bøggild. "Our publication is a comprehensive case study that highlights the versatility and reliability of terahertz spectroscopy for quality control and should guide our colleagues in applying the technique to many industrially relevant substrates such silicon, sapphire, silicon carbide and polymers." he adds.

Setting standards is an important step for the development of any new material, to ensure it is safe, genuine and will offer a performance that is both reliable and consistent. That is why the Graphene Flagship has a dedicated work-group focused on the standardisation of graphene, measurement and analytical techniques and manufacturing processes. The newly developed method for terahertz spectroscopy is on track to become a standard technical specification, thanks to the work of the Graphene Flagship Standardisation Committee. "This will undoubtedly accelerate the uptake of this new technology, as it will outline how analysis and comparison of graphene samples can be done in a reproducible way," explains Peter Jepsen from Graphene Flagship Partner DTU, who co-authors the study. "Terahertz spectroscopy is yet another step to increase the trust in graphene-enabled products," he concludes.

Amaia Zurutuza, co-author of the paper and Scientific Director at Graphene Flagship partner Graphenea, says: "At Graphenea, we are convinced that terahertz imaging can enable the development of quality control techniques capable of matching manufacturing throughput requirements and providing relevant graphene quality information, which is essential in our path towards the successful industrialisation of graphene."

Thurid Gspann, the Chair of the Graphene Flagship Standardisation Committee, says: "This terahertz [spectroscopy] technique is expected to be widely adopted by industry. It does not require any particular sample preparation and is a mapping technique that allows one to analyse large areas in a time efficient way."

Marco Romagnoli, Graphene Flagship Division Leader for Electronics and Photonics Integration, adds: "The terahertz spectroscopy tool for wafer-scale application is a state-of-the-art, high TRL system to characterise multilayer stacks on wafers that contain CVD graphene. It works in a short time and with good accuracy, and provides the main parameters of interest, such as carrier mobility, conductivity, scattering time and carrier density. This high-value technical achievement is also an example of the advantage of being part of a large collaborative project like the Graphene Flagship."

Andrea C. Ferrari, Science and Technology Officer of the Graphene Flagship and Chair of its Management Panel, adds: "Yet again, Graphene Flagship researchers are pioneering a new characterisation technique to facilitate the development of graphene technology. This helps us progress steadily on our innovation and technology roadmap and will benefit the industrial uptake of graphene in a wide range of applications."
-end-


Graphene Flagship

Related Graphene Articles from Brightsurf:

How to stack graphene up to four layers
IBS research team reports a novel method to grow multi-layered, single-crystalline graphene with a selected stacking order in a wafer scale.

Graphene-Adsorbate van der Waals bonding memory inspires 'smart' graphene sensors
Electric field modulation of the graphene-adsorbate interaction induces unique van der Waals (vdW) bonding which were previously assumed to be randomized by thermal energy after the electric field is turned off.

Graphene: It is all about the toppings
The way graphene interacts with other materials depends on how these materials are brought into contact with the graphene.

Discovery of graphene switch
Researchers at Japan Advanced Institute of Science and Technology (JAIST) successfully developed the special in-situ transmission electron microscope technique to measure the current-voltage curve of graphene nanoribbon (GNR) with observing the edge structure and found that the electrical conductance of narrow GNRs with a zigzag edge structure abruptly increased above the critical bias voltage, indicating that which they are expected to be applied to switching devices, which are the smallest in the world.

New 'brick' for nanotechnology: Graphene Nanomesh
Researchers at Japan advanced institute of science and technology (JAIST) successfully fabricated suspended graphene nanomesh (GNM) by using the focused helium ion beam technology.

Flatter graphene, faster electrons
Scientists from the Swiss Nanoscience Institute and the Department of Physics at the University of Basel developed a technique to flatten corrugations in graphene layers.

Graphene Flagship publishes handbook of graphene manufacturing
The EU-funded research project Graphene Flagship has published a comprehensive guide explaining how to produce and process graphene and related materials (GRMs).

How to induce magnetism in graphene
Graphene, a two-dimensional structure made of carbon, is a material with excellent mechani-cal, electronic and optical properties.

Graphene: The more you bend it, the softer it gets
New research by engineers at the University of Illinois combines atomic-scale experimentation with computer modeling to determine how much energy it takes to bend multilayer graphene -- a question that has eluded scientists since graphene was first isolated.

How do you know it's perfect graphene?
Scientists at the US Department of Energy's Ames Laboratory have discovered an indicator that reliably demonstrates a sample's high quality, and it was one that was hiding in plain sight for decades.

Read More: Graphene News and Graphene Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.