Mini robots to undertake major tasks?

February 24, 2006

The MICRON project team, led by the Institute for Process Control and Robotics (IPR), Karlsruhe, Germany, brought together eight international partners. Funded under the European Commission's FET (Future and Emerging Technologies) initiative of the IST programme, MICRON set out to build a total of five to ten micro robots, just cubic centimetres in size.

"Each one would measure about 1.5cm by 3 cm," says IPR´s Joerg Seyfried. "They were designed to be complete robots, with different kinds of actuators for gripping, cell manipulation, and so on. Each one would be wireless, with lots of electronics on board, and an infrared control system - rather like a TV remote, but two-way in this case. They would be able to cooperate together on a range of tasks."

Building the robots involved developing many custom applications, he adds. "One of these was the wireless powering system, the 'power floor', which allows the robot to get energy from its surroundings," he says. "It uses a coil system to transmit the electricity through the air."

The robots were designed as part of a networked system: "The individual robots are not that intelligent," explains Seyfried. "They don't, for example, know where they are, although they know which direction they are moving in. We developed a special positioning system, so that we know where each robot is. It views them from 40 to 50 cm above. They are controlled by a central robot control system, with several networked computers for planning and commands - this could theoretically control many robots."

The hardest part of the project was "getting the hardware integrated and running - our goal was to have five robots operational, but this couldn't be done in our three-year timeframe owing to the extreme complexity of the task," he says.

Nevertheless, the one fully functional robot that the project did achieve could be tested in three different scenarios. "The first was a medical or biological application, in which the robot was handling biological cells, injecting liquid into them," Seyfried explains. "The second scenario was micro-assembly, in which the robot soldered tiny parts. The final scenario looked at atomic force, with the robot mounting atomic force and doing experiments on it."

The results were encouraging. "Our experiments showed that the cell injection is entirely feasible, as is the micro soldering," says Seyfried. Although the MICRON robots are clearly not a mass market product, commercialisation - though still far off - would be perfectly possible, he believes: "Robots with this sort of capability, and mobility, would be perfectly suited to lab work, such as the micro assembly of prototypes. Tasks such as cell injection could be performed on a mass scale."

With MICRON now having run its course, the project team is currently working on the project reports and evaluation. "What's missing is the integration work, and this is what we will try to do next within the [also FET-funded] I-Swarm project," says Seyfried. "This will build on MICRON to produce robots with a 'swarm' intelligence - that is, with limited capabilities, but able to communicate with each other."

The tiny robots of science fiction tales might be smarter, but, as Seyfried points out, "We're working on the smallest size range currently being worked on by a few other groups worldwide - like MIT. On a European level, MICRON is unique."
Contact: Joerg Seyfried
Institute for Process Control and Robotics
Universität Karlsruhe (TH)
Tel: +49-721-6083656

Source: Based on information from MICRON

IST Results

Related Robots Articles from Brightsurf:

On the way to lifelike robots
In order for robots to be able to achieve more than simple automated machines in the future, they must not only have their own ''brain''.

Children think robots can help the elderly -- but not their own grandparents
A study that asked children to assess three different robots showed that they responded most positively to simple robots shaped like flower pots, and were most sceptical of Pepper the robot, which looks more human.

Nanomaterial gives robots chameleon skin
A new film made of gold nanoparticles changes color in response to any type of movement.

How many jobs do robots really replace?
MIT economist Daron Acemoglu's new research puts a number on the job costs of automation.

Robots popular with older adults
A new study by psychologists from the University of Jena (Germany) does not confirm that robot skepticism among elder people is often suspected in science.

Showing robots how to do your chores
By observing humans, robots learn to perform complex tasks, such as setting a table.

Designing better nursing care with robots
Robots are becoming an increasingly important part of human care, according to researchers based in Japan.

Darn you, R2! When can we blame robots?
A recent study finds that people are likely to blame robots for workplace accidents, but only if they believe the robots are autonomous.

Robots need a new philosophy to get a grip
Robots need to know the reason why they are doing a job if they are to effectively and safely work alongside people in the near future.

How can robots land like birds?
Birds can perch on a wide variety of surfaces, thick or thin, rough or slick.

Read More: Robots News and Robots Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to