Nav: Home

Laser 'drill' sets a new world record in laser-driven electron acceleration

February 25, 2019

Combining a first laser pulse to heat up and "drill" through a plasma, and another to accelerate electrons to incredibly high energies in just tens of centimeters, scientists have nearly doubled the previous record for laser-driven particle acceleration.

The laser-plasma experiments, conducted at the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab), are pushing toward more compact and affordable types of particle acceleration to power exotic, high-energy machines - like X-ray free-electron lasers and particle colliders - that could enable researchers to see more clearly at the scale of molecules, atoms, and even subatomic particles.

The new record of propelling electrons to 7.8 billion electron volts (7.8 GeV) at the Berkeley Lab Laser Accelerator (BELLA) Center surpasses a 4.25 GeV result at BELLA announced in 2014. The latest research is detailed in the Feb. 25 edition of the journal Physical Review Letters. The record result was achieved during the summer of 2018.

The experiment used incredibly intense and short "driver" laser pulses, each with a peak power of about 850 trillion watts and confined to a pulse length of about 35 quadrillionths of a second (35 femtoseconds). The peak power is equivalent to lighting up about 8.5 trillion 100-watt lightbulbs simultaneously, though the bulbs would be lit for only tens of femtoseconds.

Each intense driver laser pulse delivered a heavy "kick" that stirred up a wave inside a plasma - a gas that has been heated enough to create charged particles, including electrons. Electrons rode the crest of the plasma wave, like a surfer riding an ocean wave, to reach record-breaking energies within a 20-centimeter-long sapphire tube.

"Just creating large plasma waves wasn't enough," noted Anthony Gonsalves, the lead author of the latest study. "We also needed to create those waves over the full length of the 20-centimeter tube to accelerate the electrons to such high energy."

To do this required a plasma channel, which confines a laser pulse in much the same way that a fiber-optic cable channels light. But unlike a conventional optical fiber, a plasma channel can withstand the ultra-intense laser pulses needed to accelerate electrons. In order to form such a plasma channel, you need to make the plasma less dense in the middle.

In the 2014 experiment, an electrical discharge was used to create the plasma channel, but to go to higher energies the researchers needed the plasma's density profile to be deeper - so it is less dense in the middle of the channel. In previous attempts the laser lost its tight focus and damaged the sapphire tube. Gonsalves noted that even the weaker areas of the laser beam's focus - its so-called "wings" - were strong enough to destroy the sapphire structure with the previous technique.

Eric Esarey, BELLA Center Director, said the solution to this problem was inspired by an idea from the 1990s to use a laser pulse to heat the plasma and form a channel. This technique has been used in many experiments, including a 2004 Berkeley Lab effort that produced high-quality beams reaching 100 million electron volts (100 MeV).

Both the 2004 team and the team involved in the latest effort were led by former ATAP and BELLA Center Director Wim Leemans, who is now at the DESY laboratory in Germany. The researchers realized that combining the two methods - and putting a heater beam down the center of the capillary - further deepens and narrows the plasma channel. This provided a path forward to achieving higher-energy beams.

In the latest experiment, Gonsalves said, "The electrical discharge gave us exquisite control to optimize the plasma conditions for the heater laser pulse. The timing of the electrical discharge, heater pulse, and driver pulse was critical."

The combined technique radically improved the confinement of the laser beam, preserving the intensity and the focus of the driving laser, and confining its spot size, or diameter, to just tens of millionths of a meter as it moved through the plasma tube. This enabled the use of a lower-density plasma and a longer channel. The previous 4.25 GeV record had used a 9-centimeter channel.

The team needed new numerical models (codes) to develop the technique. A collaboration including Berkeley Lab, the Keldysh Institute of Applied Mathematics in Russia, and the ELI-Beamlines Project in the Czech Republic adapted and integrated several codes. They combined MARPLE and NPINCH, developed at the Keldysh Institute, to simulate the channel formation; and INF&RNO, developed at the BELLA Center, to model the laser-plasma interactions.

"These codes helped us to see quickly what makes the biggest difference - what are the things that allow you to achieve guiding and acceleration," said Carlo Benedetti, the lead developer of INF&RNO. Once the codes were shown to agree with the experimental data, it became easier to interpret the experiments, he noted.

"Now it's at the point where the simulations can lead and tell us what to do next," Gonsalves said.

Benedetti noted that the heavy computations in the codes drew upon the resources of the National Energy Research Scientific Computing Center (NERSC) at Berkeley Lab. Future work pushing toward higher-energy acceleration could require far more intensive calculations that approach a regime known as exascale computing.

"Today, the beams produced could enable the production and capture of positrons," which are electrons' positively charged counterparts, said Esarey.

He noted that there is a goal to reach 10 GeV energies in electron acceleration at BELLA, and future experiments will target this threshold and beyond.

"In the future, multiple high-energy stages of electron acceleration could be coupled together to realize an electron-positron collider to explore fundamental physics with new precision," he said.
-end-
Also participating in this research were researchers from UC Berkeley and the National Research Nuclear University in Russia.

This work was supported by the Department of Energy's Office of Science, the Alexander von Humboldt Foundation, and the National Science Foundation.

Founded in 1931 on the belief that the biggest scientific challenges are best addressed by teams, Lawrence Berkeley National Laboratory and its scientists have been recognized with 13 Nobel Prizes. Today, Berkeley Lab researchers develop sustainable energy and environmental solutions, create useful new materials, advance the frontiers of computing, and probe the mysteries of life, matter, and the universe. Scientists from around the world rely on the Lab's facilities for their own discovery science. Berkeley Lab is a multiprogram national laboratory, managed by the University of California for the U.S. Department of Energy's Office of Science.

DOE's Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.

DOE/Lawrence Berkeley National Laboratory

Related Plasma Articles:

How bacteria protect themselves from plasma treatment
Considering the ever-growing percentage of bacteria that are resistant to antibiotics, interest in medical use of plasma is increasing.
A breakthrough in the study of laser/plasma interactions
Researchers from Lawrence Berkeley National Laboratory and CEA Saclay have developed a particle-in-cell simulation tool that is enabling cutting-edge simulations of laser/plasma coupling mechanisms.
Researchers turn liquid metal into a plasma
For the first time, researchers at the University of Rochester's Laboratory for Laser Energetics (LLE) have found a way to turn a liquid metal into a plasma and to observe the temperature where a liquid under high-density conditions crosses over to a plasma state.
How black holes power plasma jets
Cosmic robbery powers the jets streaming from a black hole, new simulations reveal.
Give it the plasma treatment: strong adhesion without adhesives
A Japanese research team at Osaka University used plasma treatment to make fluoropolymers and silicone resin adhere without any adhesives.
Chemotherapeutic drugs and plasma proteins: Exploring new dimensions
This review provides a bird's eye view of interaction of a number of clinically important drugs currently in use that show covalent or non-covalent interaction with serum proteins.
The coming of age of plasma physics
The story of the generation of physicists involved in the development of a sustainable energy source, controlled fusion, using a method called magnetic confinement.
Intense microwave pulse ionizes its own channel through plasma
More than 30 years ago, researchers theoretically predicted the ionization-induced channeling of an intense microwave beam propagating through a neutral gas (>103 Pa) -- and now it's finally been observed experimentally.
Plasma thruster: New space debris removal technology
A Japanese and Australian research group has discovered new technology to remove space debris using a single propulsion system in a helicon plasma thruster.
Separating the sound from the noise in hot plasma fusion
For fusion power plants to be effective, scientists must find a way to trigger the low-to-high confinement transition, associated with zonal flows of plasma.
More Plasma News and Plasma Current Events

Top Science Podcasts

We have hand picked the top science podcasts of 2019.
Now Playing: TED Radio Hour

Risk
Why do we revere risk-takers, even when their actions terrify us? Why are some better at taking risks than others? This hour, TED speakers explore the alluring, dangerous, and calculated sides of risk. Guests include professional rock climber Alex Honnold, economist Mariana Mazzucato, psychology researcher Kashfia Rahman, structural engineer and bridge designer Ian Firth, and risk intelligence expert Dylan Evans.
Now Playing: Science for the People

#541 Wayfinding
These days when we want to know where we are or how to get where we want to go, most of us will pull out a smart phone with a built-in GPS and map app. Some of us old timers might still use an old school paper map from time to time. But we didn't always used to lean so heavily on maps and technology, and in some remote places of the world some people still navigate and wayfind their way without the aid of these tools... and in some cases do better without them. This week, host Rachelle Saunders...
Now Playing: Radiolab

Dolly Parton's America: Neon Moss
Today on Radiolab, we're bringing you the fourth episode of Jad's special series, Dolly Parton's America. In this episode, Jad goes back up the mountain to visit Dolly's actual Tennessee mountain home, where she tells stories about her first trips out of the holler. Back on the mountaintop, standing under the rain by the Little Pigeon River, the trip triggers memories of Jad's first visit to his father's childhood home, and opens the gateway to dizzying stories of music and migration. Support Radiolab today at Radiolab.org/donate.