Turn trash into cash... and save energy

March 01, 2013

Suppose you could replace "Made in China" with "Made in my garage." Suppose also that every time you polished off a jug of two percent, you would be stocking up on raw material to make anything from a cell phone case and golf tees to a toy castle and a garlic press.

And, you could give yourself a gold medal for being a bona fide, recycling, polar-bear-saving rock star.

Michigan Technological University's Joshua Pearce is working on it. His main tool is open-source 3D printing, which he uses to save thousands of dollars by making everything from his lab equipment to his safety razor.

Using free software downloaded from sites like Thingiverse, which now holds over 54,000 open-source designs, 3D printers make all manner of objects by laying down thin layers of plastic in a specific pattern. While high-end printers can cost many thousands of dollars, simpler open-source units run between $250 and $500--and can be used to make parts for other 3D printers, driving the cost down ever further.

"One impediment to even more widespread use has been the cost of filament," says Pearce, an associate professor of materials science and engineering and electrical and computer engineering. Though vastly less expensive than most manufactured products, the plastic filament that 3D printers transform into useful objects isn't free.

Milk jugs, on the other hand, are a costly nuisance, either to recycle or to bury in a landfill. But if you could turn them into plastic filament, Pearce reasoned, you could solve the disposal problem and drive down the cost of 3D printing even more.

So Pearce and his research group decided to make their own recycling unit, or RecycleBot. They cut the labels off milk jugs, washed the plastic, and shredded it. Then they ran it through a homemade device that melts and extrudes it into a long, spaghetti-like string of plastic. Their process is open-source and free for everyone to make and use at Thingiverse.com.

The process isn't perfect. Milk jugs are made of high-density polyethylene, or HDPE, which is not ideal for 3D printing. "HDPE is a little more challenging to print with," Pearce says. But the disadvantages are not overwhelming. His group made its own climate-controlled chamber using a dorm-room refrigerator and an off-the-shelf teddy-bear humidifier and had good results. With more experimentation, the results would be even better, he says. "3D printing is where computers were in the 1970s."

The group determined that making their own filament in an insulated RecycleBot used about 1/10th the energy needed to acquire commercial 3D filament. They also calculated that they used less energy than it would take to recycle milk jugs conventionally.

RecycleBots and 3D printers have all kinds of applications, but they would be especially useful in areas where shopping malls are few and far between, Pearce believes. "Three billion people live in rural areas that have lots of plastic junk," he says. "They could use it to make useful consumer goods for themselves. Or imagine people living by a landfill in Brazil, recycling plastic and making useful products or even just 'fair trade filament' to sell. Twenty milk jugs gets you about 1 kilogram of plastic filament, which currently costs $30 to $50 online."
-end-
Pearce's research is described in depth in two articles: "Distributed Recycling of Waste Polymer into RepRap Feedstock,"coauthored with Christian Baechler and Matthew DeVuono of Queen's University and published in the March issue of Rapid Prototyping; and "Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas," coauthored by Jerry Anzalone, Megan Kreiger, Meredith Mulder and Alexandra Glover of Michigan Tech, which will appear in the Proceedings of the Materials Research Society.

Michigan Technological University

Related Recycling Articles from Brightsurf:

Paper recycling must be powered by renewables to save climate
The study, published in Nature Sustainability, found that greenhouse gas emissions would increase by 2050 if we recycled more paper, as current methods rely on fossil fuels and electricity from the grid.

Lighting the path to recycling carbon dioxide
Combining solar-harvesting materials with carbon-dioxide-consuming microbes could be an efficient way to generate clean fuels.

Plastics, waste and recycling: It's not just a packaging problem
Discussions of the growing plastic waste problem often focus on reducing the volume of single-use plastic packaging items such as bags, bottles, tubs and films.

NREL research points to strategies for recycling of solar panels
Researchers at the National Renewable Energy Laboratory (NREL) have conducted the first global assessment into the most promising approaches to end-of-life management for solar photovoltaic (PV) modules.

Recycling plastics together, simple and fast
Scientists successfully blended different types of plastics to be recycled together, providing a solution to the environmental problem of plastic waste and adding economic value to plastic materials.

Chemical recycling makes useful product from waste bioplastic
A faster, more efficient way of recycling plant-based 'bioplastics' has been developed by a team of scientists at the universities of Birmingham and Bath.

New recycling method could make polyurethane sustainable
Polyurethanes (PUs) are used in many products, such as mattresses, insulation, footwear and construction materials.

Almond orchard recycling a climate-smart strategy
Recycling orchard trees onsite can sequester carbon, save water and increase crop yields, making it a climate-smart practice for California's irrigated almond orchards, finds a study from the University of California, Davis.

'Deceptively simple' process could boost plastics recycling
Plastics are a victim of their own success, so inexpensive, easy to use and versatile that the world is awash in plastic waste.

New membranes for cellular recycling
Cells produce the shell of the autophagosomes on the spot.

Read More: Recycling News and Recycling Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.