Economical and flexible

March 02, 2007

These energy-saving electronic components consist of two different transistor types. The new organic electronic components can be operated with significantly lower voltages than previous organic circuits - voltages, such as those supplied by normal household batteries from 1.5 to 3 volts (Nature, February 2007).

Transistors made from organic materials have an advantage over normal silicon transistors. They can be constructed on flexible surfaces, such as plastic film, making organic circuits ideal for portable and mobile devices. However, until now, organic transistors have also had a big disadvantage: they consumed too much energy. Scientists have now constructed energy-saving organic circuits.

To this purpose, they make use of two principles: on the one hand, they use self-organising organic monolayers as the insulator for the transistor. Certain organic compounds deposit themselves under specific conditions on a substrate with an active surface. The coating consists of a layer of organic molecules less than 3 nm thick. This monolayer lowers the operating voltage of the transistor as this is directly dependent on the thickness of the insulator. On the other hand, the scientists linked p channel transistors and n channel transistors in complementary circuits. Up to now, organic circuits have mostly been realised in the form of unipolar circuits, which consist of transistors of just one type only (either p channel or n channel). In this kind of unipolar circuit, there is a constant undesirable cross-current, whereas with the complementary construction, one of the two transistors blocks the flow of the current - an opportunity to save energy. According to Dr. Hagen Klauk of the Max Planck Institute for Solid State Research, "Complementary circuits have been standard in silicon technology for 25 years. We believe that organic electronics can also benefit from the advantages of complementary circuit technology. And by combining it with self-organising monolayers, we could lower the supply voltage to that of small batteries."

The scientists thus created organic field effect transistors on a glass substrate. A field effect transistor has three circuit points - gate, source and drain. Irrespective of the voltage at the gate, a current flows from the source to the drain electrode through the charge carrier formed in the semiconductor. The scientists use the air-stable organic compounds: pentacene; and hexadecafluoro copper phthalocyanine. Between the gate and the semi-conductor layer there is an insulator, in this case a very thin self-organising monolayer. Aluminium is used for the gate electrode. Applying aluminium in a defined pattern to the glass substrate makes possible the construction of complementary circuits.

The researchers made different electronic circuits, including complementary inverters, NAND gates and ring oscillators. Of particular importance: the materials used allowed them to make the transistors and circuits at temperatures up to 90 degrees Celsius. A relatively low temperature is necessary for electronic components to allow a change to flexible and transparent plastic substrates. The scientists demonstrated that their method was also suitable for this purpose: they built these transistors on PEN, polyethylene naphthalate. Hagen Klauk explains why that was an advantage: "Silicon transistors need a substrate that is resistant to the high temperatures created in the manufacture of the transistors. In contrast, organic transistors can be created at temperatures less than 100 degrees Celsius - plastics can therefore be used as the substrate. These are flexible and nevertheless robust." Organic complementary circuits can consequently be used everywhere where products need to be simultaneously robust and mobile, for example in a portable, battery-powered flat screen.


Related Transistors Articles from Brightsurf:

Breakthrough quantum-dot transistors create a flexible alternative to conventional electronics
Researchers at Los Alamos National Laboratory and their collaborators from the University of California, Irvine have created fundamental electronic building blocks out of tiny structures known as quantum dots and used them to assemble functional logic circuits.

Modeling organic-field effect transistors with a molecular resolution
Organic field-effect transistors represent a promising type of organic electronic device with applications including (bio)sensors, electrical circuits, or data storage.

Printing organic transistors
Researchers successfully print and demonstrate organic transistors, electronic switches, which can operate close to their theoretical speed limits.

All-2D light-emitting field-effect transistors
All-2D light-emitting field-effect transistors.

Dresden physicists develop printable organic transistors
Scientists at the Institute of Applied Physics at TU Dresden have come a step closer to the vision of a broad application of flexible, printable electronics.

Peel-apart surfaces drive transistors to the ledge
Surfaces featuring atomic-scale ledges and steps can act as reusable templates for producing nanoelectronic components.

2D materials for ultrascaled field-effect transistors
Since the discovery of graphene, two-dimensional materials have been the focus of materials research.

Carbon nanotube transistors make the leap from lab to factory floor
A technique for making carbon nanotube transistors in large quantities paves the way for more energy efficient, 3D microprocessors.

NIST scientists create new recipe for single-atom transistors
Researchers at the National Institute of Standards and Technology (NIST) and their colleagues at the University of Maryland have developed a step-by-step recipe to produce single-atom transistors.

Researchers demonstrate a platform for future optical transistors
Photons do not interact with each other well, which creates a big problem for microelectronics engineers.

Read More: Transistors News and Transistors Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to