Nav: Home

Engineered cartilage template to heal broken bones

March 08, 2018

A team of UConn Health researchers has designed a novel, hybrid hydrogel system to help address some of the challenges in repairing bone in the event of injury. The UConn Health team, led by associate professor of orthopedic surgery Syam Nukavarapu, described their findings in a recent issue of Journal of Biomedical Materials Research-Part B, where the work is featured on the journal cover.

There are over 200 bones in an adult human skeleton, ranging in size from a couple of millimeters in length to well over a foot. How these bones form and how they are repaired if injured varies, and has posed a challenge for many researchers in the field of regenerative medicine.

Two processes involved with human skeletal development help all the bones in our body form and grow. These processes are called intramembranous and endochondral ossification, IO and EO respectively. While they are both critical, IO is the process responsible for the formation of flat bones, and EO is the process that forms long bones like femurs and humeri.

For both processes, generic mesenchymal stem cells (MSCs) are needed to trigger the growth of new bone. Despite this similarity, IO is significantly easier to recreate in the lab since MSCs can directly differentiate, or become specialized, into bone-forming cells without taking any additional steps.

However, this relative simplicity comes with limitations. To circumvent the issues associated with IO, the UConn Health team set out to develop an engineered extracellular matrix that uses hydrogels to guide and support the formation of bone through EO.

"Thus far, very few studies have been focused on matrix designs for endochondral ossification to regenerate and repair long bone," says Nukavarapu, who holds joint appointments in the departments of biomedical engineering and materials science and engineering. "By developing a hybrid hydrogel combination, we were able to form an engineered extracellular matrix that could support cartilage-template formation."

Nukavarapu notes that vascularization is the key in segmental bone defect repair and regeneration. The main problem with IO-formed bone is caused by a lack of blood vessels, also called vascularization. This means that IO isn't capable of regenerating enough bone tissue to be applied to large bone defects that result from trauma or degenerative diseases like osteoporosis. Although many researchers have tried various strategies, successfully vascularizing bone regenerated with IO remains a significant challenge.

On the other hand, vascularization is a natural outcome of EO due to the development of a cartilage template, chondrocyte hypertrophy, and eventual bone tissue formation.

While IO's simplicity caused limitations, EO's benefits result in an intricate balancing act. EO requires precise spatial and temporal coordination of different elements, like cells, growth factors, and an extracellular matrix, or scaffold, onto which the MSCs attach, proliferate, and differentiate.

To achieve this delicate balance in the lab, Nukavarapu and his colleagues combined two materials known to encourage tissue regeneration - fibrin and hyaluronan - to create an effective extracellular matrix for long bone formation. Fibrin gel mimics human bone mesenchymal stem cells and facilitates their condensation, which is required for MSC differentiation into chondrogenic cells. Hyaluronan, a naturally occurring biopolymer, mimics the later stages of the process by which differentiated chondrogenic cells grow and proliferate, also known as hypertrophic-chondrogenic differentiation.

The researchers anticipate that cartilage templates with hypertrophic chondrocytes will release bone and vessel forming factors and will also initiate vascularized bone formation. Nukavarapu says that the "use of cartilage-template matrices would lead to the development of novel bone repair strategies that do not involve harmful growth factors."

While still in the early research phase, these developments hold promise for future innovations.

"Dr. Nukavarapu's work speaks not only to the preeminence of UConn's faculty, but also to the potential real-world applications of their research," says Radenka Maric, vice president for research at UConn and UConn Health. "UConn labs are buzzing with these types of innovations that contribute to scientific breakthroughs in healthcare, engineering, materials science, and many other fields."

The researchers next plan to integrate the hybrid extracellular matrix with a load-bearing scaffold to develop cartilage templates suitable for long-bone defect repair. According to Nukavarapu, the UConn research team is hopeful that this is the first step towards forming a hypertrophic cartilage template with all the right ingredients to initiate bone tissue formation, vascularization, remodeling, and ultimately the establishment of functional bone marrow to repair long bone defects through EO.
The work was supported by grants from the AO Foundation (S-13-122N), NSF Emerging Frontiers in Research and Innovation (EFRI) (1332329), and NSF Emerging Frontiers and Multidisciplinary Activities (EFMA) (1640008).

Research in Syam Nukavarapu's lab focuses on biomaterials and tissue engineering, with emphasis on bone, cartilage, and bone-cartilage interface tissue engineering. Other UConn authors include graduate students Paiyz E. Mikael and Hyun S. Kim.

University of Connecticut

Related Cartilage Articles:

Artificial cartilage under tension as strong as natural material
Biomedical engineers at the University of California, Davis, have created a lab-grown tissue similar to natural cartilage by giving it a bit of a stretch.
Success in the 3-D bioprinting of cartilage
A team of researchers at Sahlgrenska Academy has managed to generate cartilage tissue by printing stem cells using a 3-D-bioprinter.
3-D bioprinted human cartilage cells can be implanted
Swedish researchers at Chalmers University of Technology and Sahlgrenska Academy have successfully induced human cartilage cells to live and grow in an animal model, using 3-D bioprinting.
Better cartilage map could help researchers improve engineered joint repair
Cartilage serves as a shock absorber for the human body, lubricating joints and helping them move smoothly.
Stem cells from jaw bone help repair damaged cartilage
Researchers from Columbia College of Dental Medicine have identified stem cells in the jaw bone that can make new cartilage and repair damaged joints.
High fat diet improves cartilage repair in mice
Obesity is a well-known risk factor for osteoarthritis, but its effects on cartilage repair are unknown.
Stem cells engineered to grow cartilage, fight inflammation
With a goal of treating worn, arthritic hips without extensive surgery to replace them, scientists at Washington University School of Medicine in St.
Radiocarbon dating suggests joint cartilage can't renew
Using radiocarbon dating as a forensic tool, researchers have found that human cartilage rarely renews in adulthood, suggesting that joint diseases may be harder to treat than previously thought.
3-D printing produces cartilage from strands of bioink
Strands of cow cartilage substitute for ink in a 3-D bioprinting process that may one day create cartilage patches for worn out joints, according to a team of engineers.
CWRU leads effort to replace prostheses with engineered cartilage
Case Western Reserve University will open a new center designed to develop evaluation technology and set standards for testing and improving engineered cartilage that could one day replace a variety of prosthetic devices.

Related Cartilage Reading:

Articular Cartilage: Lamellar-Repulsive Lubrication of Natural Joints
by Zenon Pawlak (Author)

This book attempts to explain a new joint lubrication mechanism with surface-active phospholipids as a lubricant. Joint lubrication is a complex problem and attributing macromolecules to the synovial fluid of the lubricant cannot fulfill all the functions. The self-organization process of a stable pore structure in phospholipid liposomes, bilayers, lamellar phases in synovial fluid forces the lamellar-repulsive mechanism of lubrication (LRML) at pH 7.4. By giving an overview of physicochemical properties of cartilage surface parameters wettability, surface energy, and friction of amphoteric... View Details

Articular Cartilage
by Kyriacos A. Athanasiou (Author), Eric M. Darling (Author), Jerry C. Hu (Author), Grayson D. DuRaine (Author), A. Hari Reddi (Author)

Well-known for their inability to heal, articular cartilage injuries often degenerate inexorably to disastrous impairment. Multitudes of treatments have been devised for this problem, but no satisfactory long-term solutions have been established. Written by world-class experts, Articular Cartilage covers the latest research and advancements related to biology, development, pathology, clinical applications, and tissue engineering. This book is useful for rheumatologists, orthopaedic surgeons, cartilage biologists, and cartilage engineers as well as for professionals working in... View Details

Articular Cartilage Tissue Engineering (Synthesis Lectures on Tissue Engineering)
by Kyriacos Athanasiou (Author), Jerry Hu (Author), Eric Darling (Author)

Cartilage injuries in children and adolescents are increasingly observed, with roughly 20% of knee injuries in adolescents requiring surgery. In the US alone, costs of osteoarthritis (OA) are in excess of $65 billion per year (both medical costs and lost wages). Comorbidities are common with OA and are also costly to manage. Articular cartilage's low friction and high capacity to bear load makes it critical in the movement of one bone against another, and its lack of a sustained natural healing response has necessitated a plethora of therapies. Tissue engineering is an emerging technology at... View Details

Mechanobiology: Cartilage and Chondrocyte, Vol. 4 (Biomedical and Health Research, Vol. 68)
by J.-F. Stoltz (Author)

Over recent years, there has been increasing interest in the fundamental role played by local mechanical parameters in chondrocyte regulation and cartilage dysfunction as a first step in the development of osteoarthritis. This is how the idea of mechanobiology and the concept of mechanotransduction were born in the 90’s. Indeed, a broad diversity of physiological phenomena is induced by mechanical stimuli (hearing, orientation to gravity, touch, tissue remodeling...) but the mechanism by which mechanical forces may regulate a physiological response is still unknown. In other respects, the... View Details

Best Science Podcasts 2018

We have hand picked the best science podcasts for 2018. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

The Consequences Of Racism
What does it mean to be judged before you walk through the door? What are the consequences? This week, TED speakers delve into the ways racism impacts our lives, from education, to health, to safety. Guests include poet and writer Clint Smith, writer and activist Miriam Zoila Pérez, educator Dena Simmons, and former prosecutor Adam Foss.
Now Playing: Science for the People

#465 How The Nose Knows
We've all got a nose but how does it work? Why do we like some smells and not others, and why can we all agree that some smells are good and some smells are bad, while others are dependant on personal or cultural preferences? We speak with Asifa Majid, Professor of Language, Communication and Cultural Cognition at Radboud University, about the intersection of culture, language, and smell. And we level up on our olfactory neuroscience with University of Pennsylvania Professor Jay Gottfried.