Getting groundbreaking medical technology out of the lab

March 16, 2020

Advances in materials, microfabrication and medical imaging are accelerating the pace of innovation in implantable neuroprosthetics. These soft, biocompatible devices, which rely on the electrical stimulation of the nervous system, have shown enormous potential in improving quality of life for patients with a range of conditions such as paralysis and deafness. Despite their promise, most of these groundbreaking discoveries never make it out of the lab.

Few discoveries make it to market

Researchers tend to underestimate the amount of engineering and development work needed to get a discovery out of the lab and into clinical use. "These discoveries can be so far ahead of the curve that finding an industry partner willing to do the development work is practically impossible," says Stéphanie Lacour, who heads EPFL's Laboratory for Soft Bioelectronic Interfaces (LSBI).

There is often a disconnect between the evaluation of new implantable devices and the physical and biological reality of healthcare practice. "With a new soft, implantable interface, you have to go through extra validation steps that don't apply to conventional implants," adds Lacour.

The EPFL team has developed an experimental protocol for testing, optimizing and validating soft, personalized implants such as the devices developed by researchers at the LSBI. The method, which should help facilitate the transition from lab to market, is described in a paper published in the journal Advanced Materials.

A four-step process

The first step is to develop a personalized, anatomically accurate, biophysical prototype of the tissue into which the device will be implanted. This process is made possible by medical imaging data and 3D printing techniques. "This means that, for each patient, we reproduce the precise structure of the tissue that will ultimately host the implant," explains Giuseppe Schiavone, a scientist at the LSBI.

Next, the fabrication process is optimized to make sure it is both reliable and reproducible. The soft implant is inserted into the tissue prototype, which is then placed in an environment that replicates the biophysical conditions inside the human body. Using a biomimetic platform developed in the lab, the researchers apply mechanical stimuli to the implant and the surrounding tissue to mimic the dynamic in vivo environment and to validate the device's biocompatibility and therapeutic efficacy. The platform also ages the implant physically and electrochemically under near-realistic conditions.

Fine-tuning through tests

"With this method, we're able to test implants more quickly, realistically and cheaply without the need for surgical procedures," adds Schiavone. "And because we evaluate the device at each stage of the process, we can fine-tune and improve it on the fly with minimal disruption." According to Schiavone, a lack of standardized validation processes for soft, biocompatible implants means that research teams currently devise their own protocols.

Researchers at the LSBI worked with the group of Marco Capogrosso at the University of Fribourg and EPFL and Lausanne University Hospital (CHUV) teams led by Grégoire Courtine and Jocelyne Bloch to test the protocol on e-dura, an EPFL-developed neuromodulation device implanted in the epidural space of the spinal cord.

Although these new soft, implantable devices are not yet ready to proceed to clinical trial, the paper's authors hope that their work will encourage other researchers to apply translational principles and support further advances in medtech innovation.

Team led by Marco Capogrosso, University of Fribourg (now University of Pittsburgh)

Teams led by Grégoire Courtine and Jocelyne Bloch, EPFL Center for Neuroprosthetics

Team led by Erwan Bézard, University of Bordeaux, France, and Chinese Academy of Medical Sciences, Beijing, China

Ecole Polytechnique Fédérale de Lausanne

Related Medical Imaging Articles from Brightsurf:

Improved medical imaging improves cancer staging
Prof. TIAN Chao's group improved the imaging quality and 3D construction of the photoacoustic imaging, and applied them to in vivo sentinel lymph node imaging.

AI techniques in medical imaging may lead to incorrect diagnoses
Machine learning and AI are highly unstable in medical image reconstruction, and may lead to false positives and false negatives, a new study suggests.

Tiny devices promise new horizon for security screening and medical imaging
Miniature devices that could be developed into safe, high-resolution imaging technology, with uses such as helping doctors identify potentially deadly cancers and treat them early, have been created in research involving the University of Strathclyde.

Advanced medical imaging combined with genomic analysis could help treat cancer patients
Melding the genetic and cellular analysis of tumors with how they appear in medical images could give physicians new insights into how to best treat patients, especially those with brain cancer, according to a new study led by TGen.

Low doses of radiation used in medical imaging lead to mutations in cell cultures
Common medical imaging procedures use low doses of radiation that are believed to be safe.

Use of medical imaging
This observational study looked at patterns of use for computed tomography (CT), magnetic resonance imaging (MRI), ultrasound and nuclear medicine imaging in the United States and in Ontario, Canada, from 2000 to 2016.

Medical imaging rates continue to rise despite push to reduce their use
The rates of use of CT, MRI and other scans have continued to increase in both the US and Ontario, Canada, according to a new study of more than 135 million imaging exams conducted by researchers at UC Davis, UC San Francisco and Kaiser Permanente.

Two-in-one contrast agent for medical imaging
Magnetic resonance imaging (MRI) visualizes internal body structures, often with the help of contrast agents to enhance sensitivity.

Medical imaging rates during pregnancy
Researchers looked at rates of medical imaging (CT, MRI, conventional x-rays, angiography, fluoroscopy and nuclear medicine) during pregnancy in this observational study that included nearly 3.5 million pregnant women in the United States and Canada from 1996 to 2016.

Scientists discover new method for developing tracers used for medical imaging
University of North Carolina researchers discovered a method for creating radioactive tracers to better track pharmaceuticals in the body as well as image diseases, such as cancer, and other medical conditions.

Read More: Medical Imaging News and Medical Imaging Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to