Making a point: Picoscale stability in a room-temperature AFM

March 25, 2009

Forget dancing angels, a research team from the National Institute of Standards and Technology (NIST) and the University of Colorado (CU) has shown how to detect and monitor the tiny amount of light reflected directly off the needle point of an atomic force microscope probe, and in so doing has demonstrated a 100-fold improvement in the stability of the instrument's measurements under ambient conditions. Their recently reported work* potentially affects a broad range of research from nanomanufacturing to biology, where sensitive, atomic-scale measurements must be made at room temperature in liquids.

Atomic force microscopes (AFMs) are one of the workhorse tools of nanotechnology. AFMs have a sharp, pointed probe fixed to one end of a diving-board-like cantilever. As the probe is scanned across a sample, atomic-scale forces tug at the probe tip, deflecting the cantilever. By reflecting a laser beam from the top of the cantilever, researchers can sense changes in the force and build up a nanoscale topographic image of the sample. The instruments are terrifically versatile--in various configurations they can image electrostatic forces, chemical bonds, magnetic forces and other atomic-scale interactions.

While extremely sensitive to atomic-scale features, AFMs also are extremely sensitive to interference from acoustic noise, temperature shifts and vibration, among other factors. This makes it difficult or impossible either to hold the probe in one place to observe the specimen under it over time (useful for studying the dynamics of proteins) or to move the probe away and return to exactly the same spot (potentially useful for nanoscale manufacturing). "At this scale, it's like trying to hold a pen and draw on a sheet of paper while riding in a jeep," observes NIST physicist Thomas Perkins. A few instruments in specialized labs, including some at NIST, solve this problem by operating at extremely cold temperatures in ultra-high vacuums and in heavily isolated environments, but those options aren't available for the vast majority of AFMs, particularly those used in bioscience laboratories where the specimen often must be immersed in a fluid.

The JILA solution uses two additional laser beams to sense the three-dimensional motion of both the test specimen and the AFM probe. The beams are held stable relative to each other to provide a common reference. To hold the specimen, the team uses a transparent substrate with tiny silicon disks--"fiducial marks"--embedded in it at regular intervals. One laser beam is focused on one of these disks. A small portion of the light scatters backwards to a detector. Any lateral vibration or drift of the sample shows up at the detector as a motion of the spot while any vertical movement shows up as a change in light intensity.** A similar trick with the second beam is used to detect vibration or drift in the probe tip, with the added complication that the system has to work with the scant amount of light reflected off the apex of the AFM probe. Unwanted motion of the tip relative to the sample is corrected on the fly by moving the substrate in the opposite direction. "This is the same idea as active noise cancellation headphones, but applied to atomic force microscopy," says Perkins.

In its most recent work, the JILA team has controlled the probe's position in three dimensions to better than 40 picometers (1 nanometer = 1000 picometers) over 100 seconds. In imaging applications, they showed the long-term drift at room temperature was a mere 5 picometers per minute, a 100-fold improvement over the best previous results under ambient conditions. Just like photographers use the stability of a tripod and longer exposures to improve picture quality, the JILA team used their improved stability to scan the AFM probe more slowly, leading to a 5-fold improvement in AFM image quality. A bonus, says Perkins, is the technique works with standard commercial probes.
* G.M. King, A.R. Carter, A.B. Churnside, L.S. Eberle and T.T. Perkins. Ultrastable atomic force microscopy: Atomic-scale stability and registration in ambient conditions. Nano Letters, Article ASAP, March 12, 2009 (DOI: 10.1021/nl803298q).

** The sample control technique was first reported in: A.R. Carter, G.M. King and T.T. Perkins. Back-scattered detection provides atomic-scale localization precision, stability, and registration in 3D. Optics Express V. 15, No. 20. Oct. 1, 2007.

National Institute of Standards and Technology (NIST)

Related Laser Beam Articles from Brightsurf:

UCF-developed new class of laser beam doesn't follow normal laws of refraction
University of Central Florida researchers have developed a new type of laser beam that doesn't follow long-held principles about how light refracts and travels.

It takes a neutron beam to find a proton
Researchers from Osaka University have successfully determined the structure of a bacterial copper amine oxidase using neutron crystallography.

Record-breaking terahertz laser beam
Terahertz radiation is used for security checks at airports, for medical examinations and also for quality checks in industry.

Light-based 'tractor beam' assembles materials at the nanoscale
Researchers have adapted a light-based technology employed widely in biology -- known as optical traps or optical tweezers -- to operate in a water-free liquid environment of carbon-rich organic solvents.

Modelling ion beam therapy
A group of physicists have used Monte Carlo modelling to produce a consistent theoretical interpretation of accurate experimental measurements of ion beams in liquid water, which is the most relevant substance for simulating interactions with human tissue.

How molecular footballs burst in an x-ray laser beam
An international research team has observed in real time how football molecules made of carbon atoms burst in the beam of an X-ray laser.

Electron beam strengthens recyclable nanocomposite
Carbon fiber-enhanced thermoplastic polymer mechanical properties improve when irradiated with an electron beam, report researchers at Kanazawa University in the journal Composites Part A.

Manipulating atoms one at a time with an electron beam
Researchers at MIT and elsewhere have found a way to manipulate the positions of individual atoms on a graphene sheet, which could be a first step to new quantum computing and sensing devices.

Balancing the beam: Thermomechanical micromachine detects terahertz radiation
Researchers at The University of Tokyo developed a microelectromechanical device that detects terahertz radiation at room temperature.

Quality of laser beam shaping can be enhanced at no extra cost
Researchers from Osaka University developed a technique for improving accuracy of laser beam shaping and wavefront obtained by conventional methods with no additional cost by optimizing virtual phase grating.

Read More: Laser Beam News and Laser Beam Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to