Rotating molecules create a brighter future

March 30, 2017

Scientists have discovered a group of materials which could pave the way for a new generation of high-efficiency lighting, solving a quandary which has inhibited the performance of display technology for decades. The development of energy saving concepts in display and lighting applications is a major focus of research, since a fifth of the world's electricity is used for generating light.

Writing in Science this week, the team, from the University of Cambridge, the University of East Anglia and the University of Eastern Finland, describes how it developed a new type of material that uses rotatable molecules to emit light faster than has ever been achieved before. It could lead to televisions, smart-phone displays and room lights which are more power-efficient, brighter and longer lasting than those currently on the market.

Corresponding author, Dr Dan Credgington, of the University of Cambridge's Cavendish Laboratory, says: "It's amazing that the very first demonstration of this new kind of material already beats the performance of technologies which have taken decades to develop. If the effect we have discovered can be harnessed across the spectrum, it could change the way we generate light."

Molecular materials are the driving force behind modern organic light-emitting diodes (OLEDs). Invented in the 1980s, these devices emit light when electricity is applied to the organic (carbon based) molecules in them. OLED lighting is now widely used in televisions, computers and mobile phones. However it has to overcome a fundamental issue which has limited efficiency when it comes to converting electrical energy into light.

Passing an electric current through these molecules puts them into an excited state, but only 25% of these are 'bright' states that can emit light rapidly. The remaining 75% are 'dark' states that usually waste their energy as heat limiting the efficiency of the OLED device. This mode of operation produces more heat than light just like in an old fashioned filament light bulb. The underlying reason is a quantum property called 'spin' and the dark states have the wrong type.

One approach to tackle this problem is to use rare elements, such as iridium, which help the dark states to emit light by allowing them to change their spin. The problem is this process takes too long, so the energy tied up in the dark states can build up to damaging levels and make the OLED unstable. This effect is such a problem for blue emitting materials (blue light has the highest energy of all the colours) that, in practice, the approach can't be used.

Chemists at the University of East Anglia have now developed a new type of material where two different organic molecules are joined together by an atom of copper or gold. The resulting structure looks a bit like a propeller. The compounds, which can be made by a simple one-pot procedure from readily available materials, were found to be surprisingly luminescent. By rotating their "propeller", dark states formed on these materials become twisted, which allows them to change their spin quickly. The process significantly increases the rate at which electrical energy is converted into light achieving an efficiency of almost 100% and preventing the damaging build-up of dark states.

Dr Dawei Di and Dr Le Yang, from Cambridge, were co-lead authors, along with Dr Alexander Romanov, from the UEA. He says:

"Our discovery that simple compounds of copper and gold can be used as bright and efficient materials for OLEDs demonstrates how chemistry can bring tangible benefits to society. All previous attempts to build OLEDs based on these metals have led to only mediocre success. The problem is that those materials required the sophisticated organic molecules to be bound with copper but has not met industrial standards. Our results address an on-going research and development challenge which can bring affordable high-tech OLED products to every home."

Computational modelling played a major role in uncovering this novel way of harnessing intramolecular twisting motions for energy conversion.

Professor Mikko Linnolahti, of the University of Eastern Finland, where this was done, comments:

"This work forms the case study for how we can explain the principles behind the functioning of these new materials and their application in OLEDS."

The next step is to design new molecules that take full advantage of this mechanism, with the ultimate goal of removing the need for rare elements entirely. This would solve the longest standing problem in the field - how to make OLEDs without having to trade-off between efficiency and stability.

Co-lead author, Dr Dawei Di, of the Cavendish Laboratory, says:

"Our work shows that excited-state spin and molecular motion can work together to strongly impact the performance of OLEDs. This is an excellent demonstration of how quantum mechanics, an important branch of fundamental science, can have direct consequences for a commercial application which has a massive global market."
-end-
Reference

Dawei Di et al: "High-performance light-emitting diodes based on carbene-metal-amides" is published in Science 30th March 2017

http://science.sciencemag.org/lookup/doi/10.1126/science.aah4345
DOI 10.1126/science.aah4345

Contact details

Paul Seagrove
Research Communications Officer,
University of Cambridge
Tel: +44 (0)1223 765542
Mob: +44 (0)7739 160561
Email: paul.seagrove@admin.cam.ac.uk

About the University of Cambridge

The mission of the University of Cambridge is to contribute to society through the pursuit of education, learning and research at the highest international levels of excellence. To date, 96 affiliates of the University have won the Nobel Prize.

Founded in 1209, the University comprises 31 autonomous Colleges, which admit undergraduates and provide small-group tuition, and 150 departments, faculties and institutions.

Cambridge is a global university. Its 19,000 student body includes 3,700 international students from 120 countries. Cambridge researchers collaborate with colleagues worldwide, and the University has established larger-scale partnerships in Asia, Africa and America.

The University sits at the heart of one of the world's largest technology clusters. The 'Cambridge Phenomenon' has created 1,500 hi-tech companies, 14 of them valued at over US$1 billion and two at over US$10 billion. Cambridge promotes the interface between academia and business, and has a global reputation for innovation. http://www.cam.ac.uk

University of Cambridge

Related Electricity Articles from Brightsurf:

Mirror-like photovoltaics get more electricity out of heat
New heat-harnessing 'solar' cells that reflect 99% of the energy they can't convert to electricity could help bring down the price of storing renewable energy as heat, as well as harvesting waste heat from exhaust pipes and chimneys.

Engineers use electricity to clean up toxic water
Powerful electrochemical process destroys water contaminants, such as pesticides. Wastewater is a significant environment issue.

Considering health when switching to cleaner electricity
Power plants that burn coal and other fossil fuels emit not only planet-warming carbon dioxide, but also pollutants linked to breathing problems and premature death.

Windows will soon generate electricity, following solar cell breakthrough
Semi-transparent solar cells that can be incorporated into window glass are a 'game-changer' that could transform architecture, urban planning and electricity generation, Australian scientists say in a paper in Nano Energy.

Static electricity as strong as lightening can be saved in a battery
Prof. Dong Sung Kim and his joint research team presented a new technology that can increase the amount of power generated by a triboelectric nanogenerator.

To make amino acids, just add electricity
By finding the right combination of abundantly available starting materials and catalyst, Kyushu University researchers were able to synthesize amino acids with high efficiency through a reaction driven by electricity.

Using renewable electricity for industrial hydrogenation reactions
The University of Pittsburgh's James McKone's research on using renewable electricity for industrial hydrogenation reactions is featured in the Journal of Materials Chemistry A's Emerging Investigators special issue.

Water + air + electricity = hydrogen peroxide
A reactor developed by Rice University engineers produces pure hydrogen peroxide solutions from water, air and energy.

Producing electricity at estuaries using light and osmosis
Researchers at EPFL are working on a technology to exploit osmotic energy -- a source of power that's naturally available at estuaries, where fresh water comes into contact with seawater.

Experimental device generates electricity from the coldness of the universe
A drawback of solar panels is that they require sunlight to generate electricity.

Read More: Electricity News and Electricity Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.