Designing Materials: 'Pasta-Stringing' Strategy Shows Promise For Creating Enhanced Polymers, UD Prof Says

March 31, 1998

DALLAS--The properties of materials synthesized by strongly bonding together segments of different "homopolymers"--long-chain plastics composed of a single repeating chemical unit--are significantly better than would be predicted, a University of Delaware researcher reported March 31 during the American Chemical Society meeting.

"This is a case where 1 plus 2 doesn't equal the expected 3, but rather 4, or even 5," says John F. Rabolt, a professor of materials science at UD.

Thanks to modern high-tech materials characterization equipment and techniques, much is known about homopolymers such as polyethylene, Teflon and other typical plastics. But few researchers world-wide are making so-called "microblock" copolymers, featuring multiple repeating chemical units, and little is known about their properties, Rabolt says.

When Rabolt's UD research team combined various homopolymers to make microblock copolymers, they "expected a hybrid effect," he says, but discovered that "the resulting properties are much better than would be predicted from looking at the properties of the two constituents."

Using pasta shapes as the basis for an analogy, Rabolt explains that a single strand of spaghetti would be like a homopolymer. A microblock co-polymer, in contrast, could comprise a continuously repeating pattern of fusilli (thin spiral) and penne (tubular) pieces.

Merely pouring the two components together into a beaker has no effect on their properties because, like oil and water, they do not mix. Similarly, placing the different pasta shapes together in a container does not change them. Chemical processing, however, forms covalent or extremely strong bonds between the two polymers, and a phenomenon known as "conformational influence" brings about changes in homopolymers that come into contact with the microblock co-polymer.

"To return to the pasta analogy," Rabolt explains, "if one piece of cooked penne was joined to two pieces of cooked fusilli, one on either end, the fusilli would probably bend the penne in ways that it would not bend if it was joined to two other pieces of penne. The end segments affect what's in the middle."

Enhanced Properties

The enhanced properties that result from these novel combinations of polymers include higher tensile strength and temperature resistance as well as greater stability. "For example," Rabolt explains, "a polymer may be metastable as a homopolymer-that is, it can be extended when stretched from its coiled state but will spring back when the tension is removed. By making it a microblock copolymer component, we can change its properties so that it is extended and remains that way rather than coiling back up."

The researchers have found that in many cases a "supramolecular helix" results when microblock copolymers are formed. Rabolt has postulated that there is an attraction between like polymer segments, which means that when the material solidifies, it forms a coiled structure where like segments are lined up with each other (much like fusilli segments would line up with other fusilli segments, while the penne segments would line up with other penne segments). This effect is probably at least partially responsible for the unexpectedly enhanced properties seen in these materials, Rabolt says.

The UD technique offers virtually limitless possibilities for materials design, Rabolt says, in terms of the types of polymer segments that can be combined into microblock copolymers as well as the lengths of the segments being combined. The segments usually fall into the 10- to 20-unit range, but can vary from 3 to 50 chemical units. The properties of two microblock copolymers will differ with different segment lengths, even if the same two polymer chemical architectures are combined, he notes.

Thus far, Rabolt has examined only two combinations of microblock copolymers: one type (ethylene-tetrafluoroethylene) supplied by Anselm Griffin's research group at the University of Southern Mississippi; and another (ethylene-ethylene oxide) provided by Greg Baker from Michigan State University. "We've proven with measurements that the properties of microblock copolymers are not predictably hybrid but actually much better," Rabolt says. "What remains now is to determine which combinations of materials and segment lengths yield the properties that are desired for various applications."

PRESENTATION INFORMATION: This news release describes ACS Paper No. 202, which will be presented at 11:00 a.m. Central Time Tuesday, March 31, in Room D267 (Level 2) of the Dallas Convention Center.

March 31, 1998
-end-


University of Delaware

Related Polymers Articles from Brightsurf:

Seeking the most effective polymers for personal protective equipment
Personal protective equipment, like face masks and gowns, is generally made of polymers.

Ultraheavy precision polymers
An environmentally friendly and sustainable synthesis of ''heavyweight'' polymers with very narrow molecular weight distributions is an important concept in modern polymer chemistry.

FSU researchers help develop sustainable polymers
Researchers at the FAMU-FSU College of Engineering have made new discoveries on the effects of temperature on sustainable polymers.

Structural colors from cellulose-based polymers
A surface displays structural colors when light is reflected by tiny, regular structural elements in a transparent material.

Growing polymers with different lengths
ETH researchers have developed a new method for producing polymers with different lengths.

Exciting new developments for polymers made from waste sulfur
Researchers at the University of Liverpool are making significant progress in the quest to develop new sulfur polymers that provide an environmentally friendly alternative to some traditional petrochemical based plastics.

Polymers can fine-tune attractions between suspended nanocubes
In new research published in EPJ E, researchers demonstrate a high level of control over a type of colloid in which the suspended particles take the form of hollow, nanoscale cubes.

Functional polymers to improve thermal stability of bioplastics
One of the key objectives for contemporary chemistry is to improve thermomechanical properties of polymers, in particular, thermostability of bioplastics.

Fluorescent technique brings aging polymers to light
Modern society relies on polymers, such as polypropylene or polyethylene plastic, for a wide range of applications, from food containers to automobile parts to medical devices.

Polymers to the rescue! Saving cells from damaging ice
Research published in the Journal of the American Chemical Society by University of Utah chemists Pavithra Naullage and Valeria Molinero provides the foundation to design efficient polymers that can prevent the growth of ice that damages cells.

Read More: Polymers News and Polymers Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.