Data storage enters a new dimension

April 11, 2000

HOLOGRAMS will be storing movies, pictures, sound and computer data much sooner than anyone thought, according to Imation, a company based in Oakdale, Minnesota, which specialises in optical storage systems. Imation says it can combine several cheap off-the-shelf technologies to make a disc recording system that will store six times as much data as a DVD.

The firm is in a race with many other companies, including Bayer of Germany, which is developing holographic discs that use liquid crystal displays to construct data "pages" that are then stored in the layers of a hologram (New Scientist, 23 January 1999, p 6). Bayer hopes to store 1000 gigabytes-1 terabyte-on a holodisc by 2004. Imation says its holographic CD-ROM recorder will be on the market in 2002.

George Purrio, an engineer with Imation in Europe, says his company's holodiscs will initially store around 125 gigabytes. Today's DVDs store less than 20 gigabytes. He says later versions have a capacity of 1 terabyte, and will deliver data at up to 1 gigabit per second-at least 25 times as fast as a DVD can manage.

The off-the-shelf technologies that Imation is exploiting include a cheap gas laser and a micro-mirror array designed for digital video projectors. The 200-milliwatt gas laser, which Purrio says will soon be selling for just $300, shines through a half-silvered mirror to create a reference beam and data beam (see Diagram). The reference beam strikes a light-sensitive polymer disc spinning on a modified CD-ROM drive.

The data beam travels via the digital micro-mirror array, which was developed by Texas Instruments and carries a million or more tiny mirrors on the surface of a chip. The mirrors flip-flop between an "on" position that lets light pass through, and an "off" position that reflects it away. Driven by a PC, or any other digital system, the array allows bitmapped "pages" of data to be constructed at much higher resolution than is possible with LCDs.

The data beam generated by the micro-mirrors falls on the polymer disc at the same spot as the reference beam, but at a different angle. This creates an optical interference pattern corresponding to the bitmapped page of information built up by the micro-mirrors. This is recorded as a permanent change to the chemistry of the polymer. The disc stores a sequence of these bitmaps along a spiral track.

The disc is read by shining light through the polymer onto a microchip image sensor. Devices of this type are now routinely built into digital still picture cameras, and cost $500 or less. Data is transferred very rapidly because the sensor can receive whole pages or blocks of data at a time.

The data on the discs will not be erasable. Imation thinks this won't matter because the capacity of the discs is so large. The advantage of this write-once, read-many-times technology, Imation says, is that it will avoid the need for expensive and unstable erasable hologram technology.
-end-
Author: Barry Fox

New Scientist issue: 15th April 2000

PLEASE MENTION NEW SCIENTIST AS THE SOURCE OF THIS STORY AND, IF PUBLISHING ONLINE, PLEASE CARRY A HYPERLINK TO: http://www.newscientist.com

New Scientist

Related Polymer Articles from Brightsurf:

Impurities enhance polymer LED efficiencies
New research published in EPJ B reveals that the higher-than-expected efficiency of PLEDs can be reached through interactions between triplet excitons, and impurities embedded in their polymer layers.

Safety of bioabsorbable polymer against durable polymer DES in high-risk PCI patients
A novel study sought to reveal whether drug-eluting stents (DES) coated with bioabsorbable polymer (BP) presented a safety advantage without compromising efficacy compared to durable polymer (DP) formulations.

Polymer membranes could benefit from taking a dip
A new technique developed by a team including researchers from the US Department of Energy (DOE)'s Argonne National Laboratory makes atomic layer deposition possible on nearly any membrane.

New polymer material may help batteries become self-healing, recyclable
Lithium-ion batteries are notorious for developing internal electrical shorts that can ignite a battery's liquid electrolytes, leading to explosions and fires.

Researchers add order to polymer gels
Gel-like materials have a wide range of applications, especially in chemistry and medicine.

Bundlemers (new polymer units) could transform industries
From tires to clothes to shampoo, many ubiquitous products are made with polymers, large chain-like molecules made of smaller sub-units, called monomers, bonded together.

New synthetic polymer degradable under very mild acidic conditions
A new type of degradable synthetic polymer was prepared by Rh-catalyzed three-component polymerization of a bis(diazocarbonyl) compound, bis(1,3-diketone), and tetrahydrofuran.

New polymer tackles PFAS pollution
toxic polyfluorinated alkyl substances (PFAS) pollution -- commonly used in non-stick and protective coatings, lubricants and aviation fire-fighting foams -- can now be removed from the environment thanks to a new low-cost, safe and environmentally friendly polymer.

New polymer films conduct heat instead of trapping it
MIT engineers have flipped the picture of the standard polymer insulator, by fabricating thin polymer films that conduct heat -- an ability normally associated with metals.

Polymer reversibly glows white when stretched
Polymers that change their appearance in response to mechanical forces can warn of damage developing in a material before the stress causes structural failure.

Read More: Polymer News and Polymer Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.