Nav: Home

3-D-printable implants may ease damaged knees

April 19, 2017

DURHAM, N.C. -- A cartilage-mimicking material created by researchers at Duke University may one day allow surgeons to 3-D print replacement knee parts that are custom-shaped to each patient's anatomy.

Human knees come with a pair of built-in shock absorbers called the menisci. These ear-shaped hunks of cartilage, nestled between the thigh and shin bones, cushion every step we take. But a lifetime of wear-and-tear -- or a single wrong step during a game of soccer or tennis -- can permanently damage these key supports, leading to pain and an increased risk of developing arthritis.

The hydrogel-based material the researchers developed is the first to match human cartilage in strength and elasticity while also remaining 3-D-printable and stable inside the body. To demonstrate how it might work, the researchers used a $300 3-D printer to create custom menisci for a plastic model of a knee.

"We've made it very easy now for anyone to print something that is pretty close in its mechanical properties to cartilage, in a relatively simple and inexpensive process," said Benjamin Wiley, an associate professor of chemistry at Duke and author on the paper, which appears online in ACS Biomaterials Science and Engineering.

After we reach adulthood, the meniscus has limited ability to heal on its own. Surgeons can attempt to repair a torn or damaged meniscus, but often it must be partially or completely removed. Available implants either do not match the strength and elasticity of the original cartilage, or are not biocompatible, meaning they do not support the growth of cells to encourage healing around the site.

Recently, materials called hydrogels have been gaining traction as a replacement for lost cartilage. Hydrogels are biocompatible and share a very similar molecular structure to cartilage: if you zoom in on either, you'll find a web of long string-like molecules with water molecules wedged into the gaps.

But researchers have struggled to create recipes for synthetic hydrogels that are equal in strength to human cartilage or that are 3-D-printable.

"The current gels that are available are really not as strong as human tissues, and generally, when they come out of a printer nozzle they don't stay put -- they will run all over the place, because they are mostly water," Wiley said.

Feichen Yang, a graduate student in Wiley's lab and author on the paper, experimented with mixing together two different types of hydrogels -- one stiffer and stronger, and the other softer and stretchier -- to create what is called a double-network hydrogel.

"The two networks are woven into each other," Yang said. "And that makes the whole material extremely strong."

By changing the relative amounts of the two hydrogels, Yang could adjust the strength and elasticity of the mixture to arrive at a formula that best matches that of human cartilage.

He also mixed in a special ingredient, a nanoparticle clay, to make the mock-cartilage 3-D-printable. With the addition of the clay, the hydrogel flows like water when placed under shear stress, such as when being squeezed through a small needle. But as soon as the stress is gone, the hydrogel immediately hardens into its printed shape.

3-D printing of other custom-shaped implants, including hip replacements, cranial plates, and even spinal vertebrae, is already practiced in orthopedic surgery. These custom implants are based on virtual 3-D models of a patient's anatomy, which can be obtained from computer tomography (CT) or magnetic resonance imaging (MRI) scans.

Meniscus implants could also benefit from 3-D printing's ability to create customized and complex shapes, the researchers say. "Shape is a huge deal for the meniscus," Wiley said. "This thing is under a lot of pressure, and if it doesn't fit you perfectly it could potentially slide out, or be debilitating or painful."

"A meniscus is not a homogenous material," Yang added. "The middle is stiffer, And the outside is a bit softer. Multi-material 3-D printers let you print different materials in different layers, but with a traditional mold you can only use one material."

In a simple demonstration, Yang took a CT scan of a plastic model of a knee and used the information from the scan to 3-D print new menisci using his double network hydrogel. The whole process, from scan to finished meniscus, took only about a day, he says.

"This is really a young field, just starting out," Wiley said. "I hope that demonstrating the ease with which this can be done will help get a lot of other people interested in making more realistic printable hydrogels with mechanical properties that are even closer to human tissue."
-end-
This research was supported by start-up funds from Duke University and grants from the National Science Foundation (ECCS-1344745, DMR-1253534).

CITATION: "3D Printing of a Double Network Hydrogel with a Compression Strength and Elastic Modulus Greater than that of Cartilage," Feichen Yang, Vaibhav Tadepalli and Benjamin J. Wiley. ACS Biomaterials Science and Engineering, online April 3, 2017. DOI: 10.1021/acsbiomaterials.7b00094

Duke University

Related Cartilage Articles:

Can magnetic stem cells improve cartilage repair?
Cells equipped with superparamagnetic iron oxide nanoparticles (SPIOs) can be directed to a specific location by an external magnetic field, which is beneficial for tissue repair.
Common conditions keep many patients out of knee cartilage research studies
Issues like age or existing arthritis may preclude patients from participating in clinical studies for new therapies that could benefit them
Will MSC micropellets outperform single cells for cartilage regeneration?
Repair of cartilage injuries or defects is aided by the introduction of mesenchymal stem cells (MSCs), which can be incorporated into hydrogels to amplify their effects.
Exercise helps prevent cartilage damage caused by arthritis
Exercise helps to prevent the degradation of cartilage caused by osteoarthritis, according to a new study from Queen Mary University of London.
Cartilage could be key to safe 'structural batteries'
Your knees and your smartphone battery have some surprisingly similar needs, a University of Michigan professor has discovered, and that new insight has led to a 'structural battery' prototype that incorporates a cartilage-like material to make the batteries highly durable and easy to shape.
Potential arthritis treatment prevents cartilage breakdown
In an advance that could improve the treatment options available for osteoarthritis, MIT engineers have designed a new material that can administer drugs directly to the cartilage.
A hydrogel that adheres firmly to cartilage and meniscus
EPFL researchers have developed a hydrogel -- made up of nearly 90 percent water -- that naturally adheres to soft tissue like cartilage and the meniscus.
A joint effort to understand cartilage development
Anyone with arthritis can appreciate how useful it would be if scientists could grow cartilage in the lab.
Basel researchers succeed in cultivating cartilage from stem cells
Stable joint cartilage can be produced from adult stem cells originating from bone marrow.
Flaxseed-like particles can now grow bone, cartilage tissues for humans
Human stem cells have shown potential in medicine as they can transform into various specialized cell types such as bone and cartilage cells.
More Cartilage News and Cartilage Current Events

Trending Science News

Current Coronavirus (COVID-19) News

Top Science Podcasts

We have hand picked the top science podcasts of 2020.
Now Playing: TED Radio Hour

Climate Mindset
In the past few months, human beings have come together to fight a global threat. This hour, TED speakers explore how our response can be the catalyst to fight another global crisis: climate change. Guests include political strategist Tom Rivett-Carnac, diplomat Christiana Figueres, climate justice activist Xiye Bastida, and writer, illustrator, and artist Oliver Jeffers.
Now Playing: Science for the People

#562 Superbug to Bedside
By now we're all good and scared about antibiotic resistance, one of the many things coming to get us all. But there's good news, sort of. News antibiotics are coming out! How do they get tested? What does that kind of a trial look like and how does it happen? Host Bethany Brookeshire talks with Matt McCarthy, author of "Superbugs: The Race to Stop an Epidemic", about the ins and outs of testing a new antibiotic in the hospital.
Now Playing: Radiolab

Speedy Beet
There are few musical moments more well-worn than the first four notes of Beethoven's Fifth Symphony. But in this short, we find out that Beethoven might have made a last-ditch effort to keep his music from ever feeling familiar, to keep pushing his listeners to a kind of psychological limit. Big thanks to our Brooklyn Philharmonic musicians: Deborah Buck and Suzy Perelman on violin, Arash Amini on cello, and Ah Ling Neu on viola. And check out The First Four Notes, Matthew Guerrieri's book on Beethoven's Fifth. Support Radiolab today at Radiolab.org/donate.