Prototype for one-metre wide vehicle is developed

April 25, 2006

The prototype of a revolutionary new type of vehicle only one metre wide specially designed for cities has been developed by a team of European scientists. The vehicle combines the safety of a micro-car and the manoeuvrability of a motorbike, while being more fuel-efficient and less polluting than other vehicles.

The CLEVER (Compact Low Emission Vehicle for Urban Transport) vehicle is a £1.5 million collaborative project which has involved nine European partners from industry and research, including the University of Bath

The three-year international project has produced a tilting three-wheeled vehicle that is fully enclosed and has seats for the driver and a passenger. Its strengthened frame protects the driver in a crash and the vehicle has a top speed of approximately 60 mph (about 100 kph) and an acceleration of 0-40 mph (60 kph) in seven seconds.

At just over three feet (1 metre) wide, it is 20 inches (0.5 metres) narrower than a micro-car, and three feet narrower than a medium sized conventional car. This reduced width means more efficient parking bays, and the possibility of narrower lanes for such vehicles.

The vehicle is different from previous attempts to create a small urban vehicle in that it is fully enclosed in a metal framework, is stylishly designed and is much safer. Its roof is as high as conventional cars, and it carries one passenger, who sits behind the driver.

Yesterday's UK launch of the car, held at the University of Bath, has resulted in coverage in the national media (see Related Links - the BBC site has video footage from the 6 O'Clock news bulletin last night).

German, French, British and Austrian organisations, including BMW, began work on the project in December 2002 completed it in March this year. It is funded by the European Union.

Partners include: the Technische Universitaet Berlin in Berlin, the Institut Francais Du Petrole in Vernaison near Lyon, and the Institut Fuer Verkehrswesen - Universitaet Fuer Bodenkultur, in Vienna.

Matt Barker and Ben Drew, research officers at the University of Bath's Centre for Power Transmission and Motion Control, developed a novel tilting chassis concept to keep the vehicle stable in corners. The vehicle controls the amount of tilt automatically, unlike on a motorcycle where the rider controls how far to tilt the vehicle.

The hydraulic active tilt system is electronically controlled to keep the vehicle balanced at all speeds while maintaining car-like steering throughout. The vehicle has an aluminium frame and plastic body work.

The work at Bath focused on the design and simulation of the vehicle chassis and control of the hydraulic tilting system. Cooper-Avon Tyres Ltd worked with the University of Bath to achieve these goals.

Running on compressed natural gas, the vehicle would not only help preserve stocks of oil but would emit about a third of the carbon dioxide than conventional family cars. Because it does not run on petrol or diesel, it would not be liable for the congestion charge in London, or any other city where the charge is likely to be adopted. Its fuel consumption is equivalent to 108 miles per gallon (or 2.6 litres per 100 kms) with petrol, a third of most cars.

"The CLEVER vehicle is a tremendous leap forward in the development of vehicles for the 21st century," said Dr Jos Darling, senior lecturer in Mechanical Engineering at the University of Bath, who is in charge of its part of the project, with Dr Geraint Owen.

"Making our vehicles smaller is a good solution to the relentless increase in traffic in our towns and cities. The advent of micro cars was a first step, but with its manoeuvrability and narrowness, the CLEVER vehicle is the ultimate in the search for a small vehicle to get around cities like Bath and London.

"The fact that it has a stylish design, can carry a passenger, is not open to the weather and is as high as a conventional car, will mean it will be much more popular with motorists than previous novel city vehicles.

"It costs less to run, is quieter and is less polluting, and this will make it popular with environmentalists. Its strengthened safety frame makes it very safe for the driver in accidents.

"We think the CLEVER vehicle is the way forward in city motoring and are proud that the University of Bath is at the heart of a European project to bring it about."
-end-


University of Bath

Related Mechanical Engineering Articles from Brightsurf:

Best practices for mechanical ventilation in patients with ARDS, COVID-19
A team from pulmonary and critical care medicine at Michigan Medicine outlines 20 evidence-based practices shown to reduce time spent on a ventilator and death in patients with acute respiratory failure and acute respiratory distress -- conditions that have many overlaps with severe COVID-19.

How cells use mechanical tension sensors to interact with their environment
In a painstaking experiment, scientists suspended a single protein filament between two microscopic beads.

Mechanical forces of biofilms could play role in infections
Studying bacterial biofilms, EPFL scientists have discovered that mechanical forces within them are sufficient to deform the soft material they grow on, e.g. biological tissues, suggesting a ''mechanical'' mode of bacterial infection.

How mechanical forces nudge tumors toward malignancy
Researchers studying two forms of skin cancer identified a long-overlooked factor determining why some tumors are more likely to metastasize than others: the physical properties of the tissue in which the cancer originates.

Building mechanical memory boards using origami
Origami can be used to create mechanical, binary switches, and in Applied Physics Letters, researchers report the fabrication of such a paper device, using the Kresling pattern, that can act as a mechanical switch.

Not just light: The sensitivity of photoreceptors to mechanical stimuli is unveiled
''We thought we knew almost everything about photoreceptors, but we have proved that is not the case''.

A mechanical way to stimulate neurons
Magnetic nanodiscs can be activated by an external magnetic field, providing a research tool for studying neural responses.

Cell removal as the result of a mechanical instability
Researchers at Kanazawa University report in the Biophysical Journal that the process of cell removal from an epithelial layer follows from an inherent mechanical instability.

Researchers demonstrate transport of mechanical energy, even through damaged pathways
Researchers from the University of Illinois at Urbana-Champaign's Grainger College of Engineering have experimentally demonstrated a new way to transport energy even through wave-guides that are defective, and even if the disorder is a transient phenomenon in time.

Tissues protect their DNA under mechanical stress
Nuclei and genetic material deform.

Read More: Mechanical Engineering News and Mechanical Engineering Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.