Nav: Home

Replication of colored 3-D models simplified

May 03, 2016

The new method is a clever combination of an established industrial production technique (thermoforming) and a new software, which allows even ambitious amateurs to produce individual pieces or small batches of objects with structurally complex and coloured surfaces quickly and cheaply. The researchers have just described their method in a scientific publication, which will be presented at the ACM SIGGRAPH 2016.

The technique's core is based on an accurate simulation of the thermoforming process, which ETH doctoral student Christian Schüller developed in the Interactive Geometry Lab under the supervision of ETH Professor Olga Sorkine-Hornung. The simulation computes an image from the coloured surface of a digital 3D model, which is then printed on to a plastic sheet. Through thermoforming, this sheet is then heated and forced into a three-dimensional shape. The key lies in computing the deformed image, so that the colours and patterns align perfectly with the geometric details of the mould.

The thermoforming technique is widespread in industrial applications and is used to manufacture many of the moulded parts that we use daily, such as yoghurt containers, inserts for boxes of chocolate and other packaging materials. "But the industrial method is not suitable for inexpensive manufacture of small batches or even individual pieces of complex shape or colour-printed models," says Schüller. In order to print these parts accurately, specialist equipment and elaborate calibration are required.

The researchers have thus developed a method based on readily accessible and inexpensive equipment and materials, and which does not require highly specialised expertise.

Mould and print

In a first step, a simple 3D printer is used to produce a negative mould of a model made of polylactic acid (PLA), a single-colour plastic. This forms the basis for the temperature-resistant gypsum mould, which is required in thermoforming.

The software computes the correct texture for the 3D model, which is printed with a standard laser printer on to a special transfer paper. With the help of pressure and heat, the image is then transferred on to a plastic sheet.

The printed plastic sheet is clamped in a thermoforming machine above the gypsum mould and heated until it becomes malleable. A vacuum quickly sucks the air from between the sheet and the gypsum cast, setting the plastic tight on to the gypsum mould like a skin - creating the plastic replica.

After the thermoforming, it is possible to see whether the software has computed the printed image correctly: "The deformation of the plastic also changes the printed image. But our software accurately calculates and compensates for this deformation," says Schüller.

High quality replicas

The researchers tested their technique with some very complex objects, including a Chinese mask and various model-making components, such as a car body shell and food replicas.

The Chinese mask in particular has many detailed features, which were reproduced perfectly in the replica; for instance, the teeth in the original are decorated with gold paint. "This detail is reproduced exactly in the copy. The surface has a high-quality look, and the colours and structure are almost identical to those of the original," says Schüller.

Due to the plastic used, the method is less suitable for reproducing the properties of objects made from materials such as wood or stone, since the surface has a high gloss. But this may even be preferable depending on the application.

Inexpensive technique for modellers

The researchers are convinced that the new method can be used in digital fabrication and industrial applications to mould prototypes before large-scale production. Architectural firms and modellers could also benefit from this method to cheaply and quickly fabricate a 3D model based on their plans and visualisations.

The technique may even be of interest to the hobby sector or schools, since the equipment needed is readily available and the gypsum cast can be used multiple times to produce numerous copies. The technique does not need to fear comparison with 3D colour printing processes: "The replica has a high quality appearance, and for many applications it's cheaper and faster than today's 3D colour printing process," says Schüller.
-end-


ETH Zurich

Related Plastic Articles:

Tracking down the scent of recycled plastic
Recycling plastic has an important role in sustainable manufacturing. However, there are still barriers to using recycled plastic not only because of its material and processing properties but also because of its smell.
Bullies and their victims more likely to want plastic surgery
11.5 percent of bullying victims have extreme desire to have cosmetic surgery, as well as 3.4 percent of bullies and 8.8 percent of teenagers who both bully and are bullied -- compared with less than 1 percent of those who are unaffected by bullying.
A plastic-eating caterpillar
Generally speaking, plastic is incredibly resistant to breaking down. That's certainly true of the trillion polyethylene plastic bags that people use each and every year.
More than $16 billion spent on cosmetic plastic surgery
A new report from the American Society of Plastic Surgeons reveals that Americans spent more than ever before -- $16 billion -- on cosmetic plastic surgery and minimally invasive procedures in 2016.
Scientists make plastic from pine trees
Most current plastics are made from oil, which is unsustainable.
Why do seabirds eat plastic? The answer stinks
We know plastic in the ocean is a problem. But why do seabirds eat marine plastic in the first place? A UC Davis study found that marine plastic debris emits the scent of a sulfurous compound that some seabirds have relied upon for thousands of years to tell them where to find food. This olfactory cue essentially tricks the birds into confusing marine plastic with food.
Plastic surgery seeks to help women gain leadership positions and break through the 'plastic ceiling'
While some progress has been made, further work is needed to achieve more equitable representation of women plastic surgeons in leadership roles, according to a special topic paper in the September issue of Plastic and Reconstructive Surgery, the official medical journal of the American Society of Plastic Surgeons.
The next frontier in facial plastic, reconstructive surgery
Is regenerative medicine the next frontier in facial plastic and reconstructive surgery?
Plastic debris and policy
Captain Charles Moore introduced the world to the 'Great Pacific Garbage Patch' in the mid-1990s.
Plastic below the ocean surface
Current measurement methods skim the surface of the ocean while computer modeling shows ocean turbulence may force plastics far below the surface despite their buoyancy.

Related Plastic Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Moving Forward
When the life you've built slips out of your grasp, you're often told it's best to move on. But is that true? Instead of forgetting the past, TED speakers describe how we can move forward with it. Guests include writers Nora McInerny and Suleika Jaouad, and human rights advocate Lindy Lou Isonhood.
Now Playing: Science for the People

#527 Honey I CRISPR'd the Kids
This week we're coming to you from Awesome Con in Washington, D.C. There, host Bethany Brookshire led a panel of three amazing guests to talk about the promise and perils of CRISPR, and what happens now that CRISPR babies have (maybe?) been born. Featuring science writer Tina Saey, molecular biologist Anne Simon, and bioethicist Alan Regenberg. A Nobel Prize winner argues banning CRISPR babies won’t work Geneticists push for a 5-year global ban on gene-edited babies A CRISPR spin-off causes unintended typos in DNA News of the first gene-edited babies ignited a firestorm The researcher who created CRISPR twins defends...