Nav: Home

Researchers develop 'designer' chemical separation membranes

May 04, 2016

Chemical separation processes in industry are typically quite costly, and current techniques often use thermal separation processes such as distillation and evaporation which now account for 10 to 15 percent of the world's annual energy use. The use of synthetic polymer membranes for the separation of gases and chemicals provides a more efficient, non-thermal solution which has the potential to reduce energy consumption significantly, as well as reducing pollution and cutting carbon dioxide emissions.

Conventional membranes exhibit relatively low permeance of gas and liquids, which limits their applications in large scale separation processes. In particular, it is challenging to develop membranes that are resistant to the organic solvents used in petrochemical refining and chemical separation processes. Ongoing research efforts are being devoted to developing more cost effective, better performing membranes for gas and liquid separations, aiming to achieve high permeance, high molecular selectivity, and high stability in practical applications.

Now researchers from Imperial College London have developed a new synthetic approach for generating high-performance microporous polymer membranes that have potential applications in a wide range of separation processes. Details are published today in Nature Materials.

The team, led by Professor Andrew Livingston from the Department of Chemical Engineering at Imperial College London, are developing new technologies for membrane separations, which have a wide-range of applications in industry for instance in the purification of oil and natural gas, desalination, solvent nanofiltration and CO2 capture.

The researchers developed a novel approach for producing polymer membranes by linking twisted monomers to form crosslinked network polymers. These contorted monomers were used to synthesise a new class of microporous polymers, known as 'polymers of intrinsic microporosity (PIMs)', which have an increased volume of internal cavities. These cavities allow the membrane to be very permeable, while the network polymer acts as a scaffold that ensures it remains rigid and stable.

Using a new method which combines the concept of microporous polymer synthesis with a technique known as interfacial polymerization, the researchers were able to synthesise microporous polymer membranes and control their thickness down to 20 nm.

Professor Andrew Livingston said "This work reports new methods of fabricating polymer membranes using a molecular design approach. We are able to design the free volume, which acts as pores in the membrane, by choosing the monomers used to make the membrane separating layer. So we have managed for the first time to create interconnected 3D polymer network membranes in which we can control the size of pores and their connectivity. This means we can make a more accurate separation between molecules and at a higher processing rate, making more efficient separations with less consumption of energy."

"We demonstrated a simple approach to preparing microporous thin polymer membranes using the aromatic polyester chemistry as an example" said Dr Maria F. Jimenez-Solomon, co-lead author of the study and a postdoctoral research associate from Livingston's group at Imperial College London. "However, the approach is not limited to synthesising polyesters, it has opened up new ways of synthesising membrane materials using a range of contorted molecules".

"To optimize and scale up the synthetic approach, we performed extensive characterisations to understand the structure and properties of these polymer membranes, however there are still many interesting scientific questions to study in the future" said Dr Qilei Song, the paper's co-lead author, a Junior Research Fellow in Department of Chemical Engineering at Imperial College London. "We expect that by tuning the molecular structure of the polymers in combination with nanoscale control of the membrane, the performance of polymer membranes can be enhanced even further".

The porous structures of polymer membranes were also confirmed by molecular simulations, performed by Dr Kim Jelfs, a Royal Society University Research Fellow at the Department of Chemistry at Imperial College London, and a co-author of the paper. She said, "The computational approaches allow us to elucidate the nature of the materials, for example, we can predict the polymer structure and porosity based on the large scale computational screening of precursor libraries."

In the paper the researchers demonstrated the applications of their membranes in gas and organic solvent separations. They now plan to extend this approach to a wide range of porous polymers designed for various industrial applications, from water purification and desalination, and purification of pharmaceuticals, to hydrocarbon separation for use in the petrochemical industry.

"If we are able to use membranes to accurately separate molecules which are in organic solvents, we can work towards replacing distillation and evaporation processes with more energy-efficient membrane separation technologies", added Professor Andrew Livingston.
The research was funded by the Engineering and Physical Sciences Research Council (EPSRC), 7th Framework Programme of the European Commission's Marie Curie Initiative, Imperial College Junior Research Fellowship, and the Royal Society University Research Fellowship.

More information:

Jimenez-Solomon MF, Song Q, Jelfs KE, Munoz-Ibanez M, Livingston AG, Polymer nanofilms with enhanced microporosity by interfacial polymerization, Nature Materials, (2016). DOI: 10.1038/nmat4638.

About Imperial College London

Consistently rated amongst the world's best universities, Imperial College London is a science-based institution with a reputation for excellence in teaching and research that attracts 14,000 students and 6,000 staff of the highest international quality. Innovative research at the College explores the interface between science, medicine, engineering and business, delivering practical solutions that improve quality of life and the environment - underpinned by a dynamic enterprise culture.

Since its foundation in 1907, Imperial's contributions to society have included the discovery of penicillin, the development of holography and the foundations of fibre optics. This commitment to the application of research for the benefit of all continues today, with current focuses including interdisciplinary collaborations to improve global health, tackle climate change, develop sustainable sources of energy and address security challenges.

Imperial College London

Related Polymers Articles:

Oyster shells inspire new method to make superstrong, flexible polymers
Columbia Engineers developed a method inspired by the nacre of oyster shells, a composite material with extraordinary mechanical properties, including great strength and resilience.
The brighter side of twisted polymers
A strategy to produce highly fluorescent nanoparticles through careful molecular design of conjugated polymers has been developed by KAUST researchers.
New strategy produces stronger polymers
MIT researchers have found a way to reduce the number of loops in polymer networks such as gels, plastics, and rubber.
Team highlights work on tuning block polymers for nanostructured systems
High-performance materials are enabling major advances in a wide range of applications from energy generation and digital information storage to disease screening and medical devices.
Estimating the glass transition temperature for polymers in 'confined geometries'
Polystyrene has a glass transition temperature of about 100 C -- at room temperature it behaves like a solid material.
Rapid Imaging of Polymers Could Lead to Better Bioimaging
A recent study by researchers at the Beckman Institute for Advanced Science and Technology at the University of Illinois identifies a method of Quantum Cascade Laser-based (QCL) infrared spectroscopic imaging that provides a more rapid method than conventional Fourier transform infrared imaging (FT-IR) to examine spherulites, large semicrystalline polymer samples, in order to identify chemical and structural properties.
Macromolecules: Light to design precision polymers
Chemists of Karlsruhe Institute of Technology have succeeded in specifically controlling the setup of precision polymers by light-induced chemical reactions.
International engineering team develop self-powered mobile polymers
n international group involving Inha University, University of Pittsburgh and the Air Force Research Laboratory has built upon their previous research and identified new materials that directly convert ultraviolet light into motion without the need for electronics or other traditional methods.
'Bottlebrush' polymers make dielectric elastomers increasingly viable for use in devices
A multi-institutional research team has developed a new electroactive polymer material that can change shape and size when exposed to a relatively small electric field.
NIST-made 'sun and rain' used to study nanoparticle release from polymers
In a recently published paper, researchers from the National Institute of Standards and Technology (NIST) describe how they subjected a commercial nanoparticle-infused coating to NIST-developed methods for accelerating the effects of weathering from ultraviolet (UV) radiation and simulated washings of rainwater.

Related Polymers Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Failure can feel lonely and final. But can we learn from failure, even reframe it, to feel more like a temporary setback? This hour, TED speakers on changing a crushing defeat into a stepping stone. Guests include entrepreneur Leticia Gasca, psychology professor Alison Ledgerwood, astronomer Phil Plait, former professional athlete Charly Haversat, and UPS training manager Jon Bowers.
Now Playing: Science for the People

#524 The Human Network
What does a network of humans look like and how does it work? How does information spread? How do decisions and opinions spread? What gets distorted as it moves through the network and why? This week we dig into the ins and outs of human networks with Matthew Jackson, Professor of Economics at Stanford University and author of the book "The Human Network: How Your Social Position Determines Your Power, Beliefs, and Behaviours".