Nav: Home

Clues on the path to a new lithium battery technology

May 04, 2016

Rechargeable lithium air batteries are a next-generation technology: Theoretically they might be much lighter and offer better performance than current lithium ion batteries. However, currently they run out of steam after only a few charging cycles. Researchers at the Technical University of Munich (TUM) and the Forschungszentrum Jülich have now investigated the processes and discovered a possible culprit: highly reactive singlet oxygen, which is released when the batteries are charged.

A trimming diet is in order: Cell phones still bulge from jacket pockets and laptop computers continue to overstrain shoulder muscles. To blame are primarily the batteries: The ubiquitous lithium ion batteries need heavy electrodes made of transition metal oxides.

Light-weight alternatives are thus sought after. "One of the most promising approaches is the lithium air battery in which the lithium cobalt oxide cathode is replaced by carbon particles," explains Johannes Wandt, doctoral candidate and member of Prof. Hubert Gasteiger's team in the Department of Technical Electrochemistry at TUM.

"The theoretical energy density of these new rechargeable batteries is significantly higher than that of traditional lithium ion batteries:" Unfortunately, the technology is not yet ready for everyday use because rechargeable lithium air batteries have only a very short lifetime: After only a few charging cycles the carbon electrode becomes corroded and the electrolytic fluid decomposes. "The problem was that no one knew exactly why," remarks Wandt.

The mystery of the short battery life

In collaboration with his colleagues, Wandt has now solved the mystery. The Munich scientists, together with experts from the Forschungszentrum Jülich, identified a potential culprit for the decaying electrodes and electrolytic fluid in an experiment: Singlet oxygen, an extremely reactive substance, is created when lithium air batteries are charged. Within fractions of a second it corrodes the surrounding material it comes into contact with.

The suspicion that singlet oxygen damages batteries is not altogether new. But only now have the researchers detected the highly reactive substance. Why it took so long? "Simply put, no one bothered to look for it," suspects TUM researcher Johannes Wandt. Because of a miscalculation the research community mistakenly assumed that the underlying reaction only occurs at high voltages. A rather complex experimental setup further compounded the situation.

Two years of fiddling

In order to investigate the charging process more precisely, the TUM researchers built a special lithium air battery. The power sinks are thin and arranged in a helix form inside a transparent glass housing. This ensures that microwave radiation and magnetic fields essential for the measurements are not shielded.

"In addition, we added molecules to the electrolytic fluid that capture the short-lived singlet oxygen and bond it as a stable radical," reports Wandt. "Using a special measuring instrument in Jülich for electron paramagnetic resonance spectroscopy, or EPR, we were able to substantiate the formation of singlet oxygen during the charging process.

"The problem has thus been identified - but not averted. Now, the researchers hope to find a mechanism to prevent the formation of singlet oxygen during charging. "Basic research could provide the foundation for the development of novel, long-lasting lithium air batteries," says Wandt.
-end-
The work has been funded by the German Federal Ministry of Education and Research (BMBF) within the framework of the project Materials and components for batteries with high energy density (MEET HiEnd) and the Bavarian Ministry of Economic Affairs and Media, Energy and Technology under the project EEBatt. The EEBatt project is part of the interdisciplinary research initiative TUM.Energy of the Munich School of Engineering.

Publication:

Singlet Oxygen Formation during the Charging Process of an Aprotic Lithium-Oxygen Battery; Johannes Wandt, Peter Jakes, Josef Granwehr, Hubert A. Gasteiger, Rüdiger-A. Eichel; Angewandte Chemie, Intl. Ed., 26.04.2016

Technical University of Munich (TUM)

Related Batteries Articles:

A seaweed derivative could be just what lithium-sulfur batteries need
Lithium-sulfur batteries have great potential as a low-cost, high-energy, energy source for both vehicle and grid applications.
Batteries from scrap metal
Chinese scientists have made good use of waste while finding an innovative solution to a technical problem by transforming rusty stainless steel mesh into electrodes with outstanding electrochemical properties that make them ideal for potassium-ion batteries.
Better cathode materials for lithium-sulphur-batteries
A team at the Helmholtz-Zentrum Berlin (HZB) has for the first time fabricated a nanomaterial made from nanoparticles of a titanium oxide compound (Ti4O7) that is characterized by an extremely large surface area, and tested it as a cathode material in lithium-sulphur batteries.
Bright future for self-charging batteries
Who hasn't lived through the frustrating experience of being without a phone after forgetting to recharge it?
Making batteries from waste glass bottles
Researchers at the University of California, Riverside's Bourns College of Engineering have used waste glass bottles and a low-cost chemical process to create nanosilicon anodes for high-performance lithium-ion batteries.
Batteries -- quick coatings
Scientists at Oak Ridge National Laboratory are using the precision of an electron beam to instantly adhere cathode coatings for lithium-ion batteries -- a leap in efficiency that saves energy, reduces production and capital costs, and eliminates the use of toxic solvents.
Lighter, more efficient, safer lithium-ion batteries
Researchers from Universidad Carlos III de Madrid and the Council for Scientific Research (initialed CSIC in Spanish) have patented a method for making new ceramic electrodes for lithium-ion batteries that are more efficient, cheaper, more resistant and safer than conventional batteries.
Clarifying how lithium ions ferry around in rechargeable batteries
IBS scientists observe the real-time ultrafast bonding of lithium ions with the solvents, in the same process that happens during charging and discharging of lithium batteries, and conclude that a new theory is needed.
A new approach to improving lithium-sulfur batteries
Researchers from the University of Delaware and China's Northwestern Polytechnical University, Shenzhen University and Hong Kong Polytechnic University have demonstrated a new polysulfide entrapping strategy that greatly improves the cycle stability of Li-S batteries.
Looking for the next leap in rechargeable batteries
USC researchers may have just found a solution for one of the biggest stumbling blocks to the next wave of rechargeable batteries -- small enough for cellphones and powerful enough for cars.

Related Batteries Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Jumpstarting Creativity
Our greatest breakthroughs and triumphs have one thing in common: creativity. But how do you ignite it? And how do you rekindle it? This hour, TED speakers explore ideas on jumpstarting creativity. Guests include economist Tim Harford, producer Helen Marriage, artificial intelligence researcher Steve Engels, and behavioral scientist Marily Oppezzo.
Now Playing: Science for the People

#524 The Human Network
What does a network of humans look like and how does it work? How does information spread? How do decisions and opinions spread? What gets distorted as it moves through the network and why? This week we dig into the ins and outs of human networks with Matthew Jackson, Professor of Economics at Stanford University and author of the book "The Human Network: How Your Social Position Determines Your Power, Beliefs, and Behaviours".