Nav: Home

Assessing battery performance: Compared to what?

May 09, 2019

Scientists must often ask themselves, compared to what? How do the results we generate in the laboratory compare with those obtained by others? How do our theoretical calculations compare with experimental data?

Answering such questions is especially crucial for researchers and developers of lithium-ion batteries. Invented four decades ago, lithium-ion batteries now power most portable electronics like laptops and power tools. They are also being developed to meet the high energy storage demands for powering electric vehicles and electric grids. New designs with different compositions of electrode and electrolyte -- the two key battery components -- are constantly coming online.

"Industrial engineers and researchers from governmental and academic labs often devise their own procedures for characterizing lithium-ion batteries based on the battery technology's intended application. This makes the comparison of any technological innovations extremely complicated." -- Ira Bloom, Argonne battery researcher

Assessing whether an innovation in electrode or electrolyte material is actually an improvement requires comparing it to other test results. However, there is no "one size fits all" standard for battery testing. Methods for testing batteries can vary widely.

Argonne battery researcher Ira Bloom notes, "Industrial engineers and researchers from governmental and academic labs often devise their own procedures for characterizing lithium-ion batteries based on the battery technology's intended application. This makes the comparison of any technological innovations extremely complicated."

A team from the U.S. Department of Energy's (DOE) Argonne National Laboratory, University of Warwick, OVO Energy, Hawaii National Energy Institute, and Jaguar Land Rover has reviewed the literature on the various methods used around the world to characterize the performance of lithium-ion batteries in order to provide insight on best practices.

Typically, battery researchers use three parameters to define electrochemical performance: capacity, open-circuit voltage, and resistance. Capacity is a measure of the total charge stored in a battery. The open-circuit voltage is the voltage available from a battery with no current flow. It represents the battery's maximum voltage. The resistance is the degree to which the component materials impede the flow of electric current, resulting in a voltage drop.

The problem is that, depending on battery application, researchers may measure these parameters under different test conditions (temperature, rate of discharge, state of charge, etc.), and thereby obtain a different battery operating life. Battery resistance, for example, can be measured with either a direct current or alternating current.

"It's complicated," observes Anup Barai, a principal investigator and senior research fellow at the University of Warwick. "The appropriateness of a test depends on what the investigator is studying. Our review provides guidance on the most appropriate test method for a given situation." To that end, the team has produced an easy-to-use table comparing eight test methods, including the main equipment needed, the information generated, and the advantages and drawbacks for each.
"Our hope," Bloom adds, "is that our results may one day lead to more reliably comparable methods for testing lithium-ion batteries tailored to different applications."

The study, entitled "A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells," recently appeared in the online version of the journal Progress in Energy and Combustion Science.

In addition to Bloom and Barai, the research team included Kotub Uddin, OVO Energy; Matthieu Dubarry, University of Hawaii at Mānoa; Limhi Somerville, Jaguar Land Rover; and Andrew McGordon and Paul Jennings, University of Warwick.

This research had support from several sponsors, including Innovate UK, the UK Engineering and Physical Sciences Research Council, the state of Hawaii, the Asia Pacific Research Initiative for Sustainable Energy Systems, and the DOE Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office.

DOE's Office of Energy Efficiency and Renewable Energy supports early-stage research and development of energy efficiency and renewable energy technologies to strengthen U.S. economic growth, energy security, and environmental quality.

Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation's first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America's scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy's Office of Science.

The U.S. Department of Energy's Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit the Office of Science website.

DOE/Argonne National Laboratory

Related Energy Articles:

Cellular energy audit reveals energy producers and consumers
Researchers at Gladstone Institutes have performed a massive and detailed cellular energy audit; they analyzed every gene in the human genome to identify those that drive energy production or energy consumption.
First measurement of electron energy distributions, could enable sustainable energy technologies
To answer a question crucial to technologies such as energy conversion, a team of researchers at the University of Michigan, Purdue University and the University of Liverpool in the UK have figured out a way to measure how many 'hot charge carriers' -- for example, electrons with extra energy -- are present in a metal nanostructure.
Mandatory building energy audits alone do not overcome barriers to energy efficiency
A pioneering law may be insufficient to incentivize significant energy use reductions in residential and office buildings, a new study finds.
Scientists: Estonia has the most energy efficient new nearly zero energy buildings
A recent study carried out by an international group of building scientists showed that Estonia is among the countries with the most energy efficient buildings in Europe.
Mapping the energy transport mechanism of chalcogenide perovskite for solar energy use
Researchers from Lehigh University have, for the first time, revealed first-hand knowledge about the fundamental energy carrier properties of chalcogenide perovskite CaZrSe3, important for potential solar energy use.
Harvesting energy from walking human body Lightweight smart materials-based energy harvester develop
A research team led by Professor Wei-Hsin Liao from the Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong (CUHK) has developed a lightweight smart materials-based energy harvester for scavenging energy from human motion, generating inexhaustible and sustainable power supply just from walking.
How much energy do we really need?
Two fundamental goals of humanity are to eradicate poverty and reduce climate change, and it is critical that the world knows whether achieving these goals will involve trade-offs.
New discipline proposed: Macro-energy systems -- the science of the energy transition
In a perspective published in Joule on Aug. 14, a group of researchers led by Stanford University propose a new academic discipline, 'macro-energy systems,' as the science of the energy transition.
How much energy storage costs must fall to reach renewable energy's full potential
The cost of energy storage will be critical in determining how much renewable energy can contribute to the decarbonization of electricity.
Energy from seawater
A new battery made from affordable and durable materials generates energy from places where salt and fresh waters mingle.
More Energy News and Energy Current Events

Trending Science News

Current Coronavirus (COVID-19) News

Top Science Podcasts

We have hand picked the top science podcasts of 2020.
Now Playing: TED Radio Hour

Debbie Millman: Designing Our Lives
From prehistoric cave art to today's social media feeds, to design is to be human. This hour, designer Debbie Millman guides us through a world made and remade–and helps us design our own paths.
Now Playing: Science for the People

#574 State of the Heart
This week we focus on heart disease, heart failure, what blood pressure is and why it's bad when it's high. Host Rachelle Saunders talks with physician, clinical researcher, and writer Haider Warraich about his book "State of the Heart: Exploring the History, Science, and Future of Cardiac Disease" and the ails of our hearts.
Now Playing: Radiolab

Insomnia Line
Coronasomnia is a not-so-surprising side-effect of the global pandemic. More and more of us are having trouble falling asleep. We wanted to find a way to get inside that nighttime world, to see why people are awake and what they are thinking about. So what'd Radiolab decide to do?  Open up the phone lines and talk to you. We created an insomnia hotline and on this week's experimental episode, we stayed up all night, taking hundreds of calls, spilling secrets, and at long last, watching the sunrise peek through.   This episode was produced by Lulu Miller with Rachael Cusick, Tracie Hunte, Tobin Low, Sarah Qari, Molly Webster, Pat Walters, Shima Oliaee, and Jonny Moens. Want more Radiolab in your life? Sign up for our newsletter! We share our latest favorites: articles, tv shows, funny Youtube videos, chocolate chip cookie recipes, and more. Support Radiolab by becoming a member today at