Inspired by a soft body of a leech -- a wall-climbing robot

May 10, 2019

A research team of Dr. Tomoaki Mashimo, Associate Prof. of Department of Mechanical Engineering at Toyohashi University of Technology, and Dr. Fumiya Iida, a reader in robotics of the department of Engineering at the University of Cambridge, has successfully developed a leech-shaped robot, "LEeCH", which can climb vertical wall. LEeCH?Longitudinally Extensible Continuum-robot inspired by Hirudinea, with a flexible body, made of a material used for shower hose, and two suction cups, is capable of elongate and bend its body without any constraints; just like a leech. Thanks to its flexible body structure and the suction cups, the robot has successfully climbed a vertical wall and even reached to the other side of the wall. The study was published in Soft Robotics, an American scientific journal, on March 27 2019.

Wall climbing robots have a wide range of potential application, including building inspection and maintenance, and search and rescue tasks at disaster sites. Climbing straight up vertical walls is fairly easy to accomplish, however, in reality, the robot may have to navigate over obstacles on the wall such as steps and transition to walls with different directions. The hardest task is to reach the other side of the wall. A robot capable of climbing up to the top of the wall has to face extreme difficulty in traversing the summit over to the other side.

The team has developed a robot inspired by land leeches, which are excellent climbers in nature. The land leeches, usually found in forests or mountains, can move around complex terrain and walls using two suction cups on both ends of bodies and soft extensible bodies. Their bodies are so light and soft that they are not subject to great damage from a fall from height.

The team designed a new motion mechanism using tube structure of shower hose to mimic the advantageous properties of leeches, namely, lightweight, flexible and extensible. The flexible tube with a metal plate with S shaped profile spirally wound has been used in general households. A gear engages with the helical groove on the surface of the tube. The flexible tube moves back and forth by the rotational motion. The robot has a body composed of three flexible tubes that are connected in parallel. The body can bend or elongate by controlling the length of each flexible tube fed by the gear.

The robot successfully achieved upward/downward climbing and horizontal transition on a vertical wall. By combining these two transitions, the robot is capable of moving freely on a two-dimensional wall surface. The robot's flexible body with large deformation enabled it to transition from one side of a vertical wall to the other side. This is the world's first achievement in developing soft and flexible robot that is capable of free movement on a wall.

The person in charge of the development and the lead author of the study, Ayato Kanada, Doctoral Programs student, says "I came up with the idea in the bathroom of my house. The shower hose went wild as if it had a life when I inadvertently turned on the faucet at maximum. Then an idea occurred to me that if I could manipulate a hose, I might be able to make a robot with dynamic movement of living creature".

Making the most of the hollow structure of the shower hose, the team is considering the possibility of changing stiffness of the tube by pouring fluid into the cavity. Robot with flexible body structure is not only highly adaptable to environment, but also highly secure against collision. It has a potential application to labor in proximity to humans.
This work was supported by the Grant-in-Aid for JSPS Research Fellow (No. 17J04776), the United Kingdom's Engineering and Physical Science Research Council (EPSRC) DTP under Award 1476475 and RG92738, and Mathworks Ltd RG90950 378. Ayato Kanada, the first author, was supported by the Program for Leading Graduate Schools conducted by Japan Society for the Promotion of Science of the Ministry of Education, Culture, Sports, Science and Technology.

Reference: Ayato Kanada, Fabio Giardina, Toby Howison, Tomoaki Mashimo, Fumiya Iida, "Reachability Improvement of a Climbing Robot based on Large Deformations induced by Tri-Tube Soft Actuators," Soft Robotics.

Toyohashi University of Technology

Related Engineering Articles from Brightsurf:

Re-engineering antibodies for COVID-19
Catholic University of America researcher uses 'in silico' analysis to fast-track passive immunity

Next frontier in bacterial engineering
A new technique overcomes a serious hurdle in the field of bacterial design and engineering.

COVID-19 and the role of tissue engineering
Tissue engineering has a unique set of tools and technologies for developing preventive strategies, diagnostics, and treatments that can play an important role during the ongoing COVID-19 pandemic.

Engineering the meniscus
Damage to the meniscus is common, but there remains an unmet need for improved restorative therapies that can overcome poor healing in the avascular regions.

Artificially engineering the intestine
Short bowel syndrome is a debilitating condition with few treatment options, and these treatments have limited efficacy.

Reverse engineering the fireworks of life
An interdisciplinary team of Princeton researchers has successfully reverse engineered the components and sequence of events that lead to microtubule branching.

New method for engineering metabolic pathways
Two approaches provide a faster way to create enzymes and analyze their reactions, leading to the design of more complex molecules.

Engineering for high-speed devices
A research team from the University of Delaware has developed cutting-edge technology for photonics devices that could enable faster communications between phones and computers.

Breakthrough in blood vessel engineering
Growing functional blood vessel networks is no easy task. Previously, other groups have made networks that span millimeters in size.

Next-gen batteries possible with new engineering approach
Dramatically longer-lasting, faster-charging and safer lithium metal batteries may be possible, according to Penn State research, recently published in Nature Energy.

Read More: Engineering News and Engineering Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to