Mini tractor beams help arrange artificial cells into tissue structuresMay 14, 2018
Researchers have used lasers to connect, arrange and merge artificial cells, paving the way for networks of artificial cells that act like tissues.
The team say that by altering artificial cell membranes they can now get the cells to stick together like 'stickle bricks' - allowing them to be arranged into whole new structures.
Biological cells can perform complex functions, but are difficult to controllably engineer.
Artificial cells, however, can in principle be made to order. Now, researchers from Imperial College London and Loughborough University have demonstrated a new level of complexity with artificial cells by arranging them into basic tissue structures with different types of connectivity.
These structures could be used to perform functions like initiating chemical reactions or moving chemicals around networks of artificial and biological cells. This could be useful in carrying out chemical reactions in ultra-small volumes, in studying the mechanisms through which cells communicate with one another, and in the development of a new generation of smart biomaterials.
Cells are the basic units of biology, which are capable of working together as a collective when arranged into tissues. In order to do this, cells must be connected and be capable of exchanging materials with one another. The team were able to link up artificial cells into a range of new architectures, the results of which are published today in Nature Communications.
The artificial cells have a membrane-like layer as their shell, which the researchers engineered to 'stick' to each other. In order to get the cells to come close enough, the team first had to manipulate the cells with 'optical tweezers' that act like mini 'tractor beams' dragging and dropping cells into any position. Once connected in this way the cells can be moved as one unit.
Lead researcher Dr Yuval Elani, an EPSRC Research Fellow from the Department of Chemistry at Imperial, said: "Artificial cell membranes usually bounce off each other like rubber balls. By altering the biophysics of the membranes in our cells, we got them instead to stick to each other like stickle bricks.
"With this, we were able to form networks of cells connected by 'biojunctions'. By reinserting biological components such as proteins in the membrane, we could get the cells to communicate and exchange material with one another. This mimics what is seen in nature, so it's a great step forward in creating biological-like artificial cell tissues."
The team were also able to engineer a 'tether' between two cells. Here the membranes are not stuck together, but a tendril of membrane material links them so that they can be moved together.
Once they had perfected the cell-sticking process, the team were able to build up more complex arrangements. These include lines of cells, 2D shapes like squares, and 3D shapes like pyramids. Once the cells are stuck together, they can be rearranged, and also pulled by the laser beam as an ensemble.
Finally, the team were also able to connect two cells, and then make them merge into one larger cell. This was achieved by coating the membranes with gold nanoparticles. When the laser beam at the heart of the 'optical tweezer' technology was concentrated at the junction between the two cells, the nanoparticles resonated, breaking the membranes at that point. The membrane then reforms as a whole.
Merging cells in this way allowed whatever chemicals they were carrying to mix within the new, larger cell, kicking off chemical reactions. This could be useful, for example, for delivering materials such as drugs into cells, and in changing the composition of cells in real time, getting them to adopt new functions.
Professor Oscar Ces, also from the Department of Chemistry at Imperial, said: "Connecting artificial cells together is a valuable technology in the wider toolkit we are assembling for creating these biological systems using bottom-up approaches. We can now start to scale up basic cell technologies into larger tissue-scale networks, with precise control over the kind of architecture we create."
The research is one of the first results from FABRICELL, a virtual research centre led by Imperial and Kings College London that brings together leading research groups working in artificial cell science in London. It consists of a series of labs across Imperial and Kings, as well as formal and informal education and research opportunities.
Imperial College London
Related Gold Nanoparticles Articles:
A gold compound shifts from a visible fluorescence to emitting infrared when ground -- a big shift with potential applications in bioimaging and security inks.
Since ancient times, people have used lustrous silver, platinum and gold to make jewelry and other adornments.
KAUST researchers reveal how small organic 'citrate' ions can stabilize gold nanoparticles, assisting research on the structures' potential.
Drugs containing gold have been used for centuries to treat conditions like rheumatoid arthritis.
Princeton researchers have taken a different approach to alchemists' ancient goal to transmute elements by making one material behave that another.
Tagging gold nanoparticles with a small dose of radiation has helped researchers trace the precious metal as it delivers a drug right into the heart of cancer cells, according to new laboratory research being presented at the 2016 National Cancer Research Institute (NCRI) Cancer Conference.
ProTraining, a University of Alberta spinoff company that provides mental health education and training to emergency personnel, announced today that it won a coveted Brandon Hall Group Gold Award for Excellence in the Learning Category (Best Advance in Custom Content).
A novel invention by Kansas State University researchers may benefit biomedical professionals and the patients they serve during electrode and organ transplant procedures.
Gold had long been considered a non-magnetic metal. But researchers at Tohoku University recently discovered that gold can in fact be magnetized by applying heat.
Titanium is the leading material for artificial knee and hip joints because it's strong, wear-resistant and nontoxic, but an unexpected discovery by Rice University physicists shows that the gold standard for artificial joints can be improved with the addition of some actual gold.
Related Gold Nanoparticles Reading:
Gold Nanoparticles for Physics, Chemistry and Biology
by Catherine Louis (Author), Catherine Louis (Editor), Olivier Pluchery (Editor)
Gold Nanoparticles for Physics, Chemistry and Biology offers an overview of recent research into gold nanoparticles, covering their discovery, usage and contemporary practical applications.
This Second Edition begins with a history of over 2000 years of the use of gold nanoparticles, with a review of the specific properties which make gold unique. Updated chapters include gold nanoparticle preparation methods, their plasmon resonance and thermo-optical properties, their catalytic properties and their future technological applications. New chapters have been included, and reveal... View Details
Self-Organized Arrays of Gold Nanoparticles: Morphology and Plasmonic Properties (Springer Theses)
by Luca Anghinolfi (Author)
This thesis addresses the fabrication and investigation of the optical response of gold nanoparticle arrays supported on insulating LiF(110) nanopatterned substrates. Motivated by the discovery of the intriguing effects that arise when electromagnetic radiation interacts with metallic nanostructures, the thesis focuses on the application of bottom-up approaches to the fabrication of extended-area plasmonic nanostructures, and the optimization of their optical response.
By developing a sophisticated effective-medium model and comparing the experimental findings with model calculations,... View Details
Gold Nanoparticles for Physics, Chemistry and Biology
by Catherine Louis (Author), Olivier Pluchery (Author)
The fascination with gold is a story which spans millennia, however scientists have recently found a new interest for gold when it is divided into miniscule grains, such as gold nanoparticles. This scientific enthusiasm started in various fields of science in the middle of the 1980s and the present book offers a panorama of the major scientific achievements obtained with gold nanoparticles.
Various topics are reviewed such as: gold nanoparticle preparation methods, their plasmon resonance and thermo-optical properties, their catalytic properties, their use in biology and medicine as well... View Details
Gold Nanoparticles in Analytical Chemistry, Volume 66 (Comprehensive Analytical Chemistry)
by Miguel Valcárcel (Editor), Ángela I. López-Lorente (Editor)
Analytical nanoscience and nanotechnology is a growing topic that is expected to have a great impact in the field of analytical chemistry. Many of the exceptional properties of gold nanoparticles make them suitable for different analytical applications and these applications allow extrapolations for their use in other fields as well. In analytical chemistry gold nanoparticles play two main roles, namely: i) As target analytes in the realm of the analysis of the nanoworld; and ii) As tools to improve analytical processes, such as the use of gold nanoparticles as components of electrodes, in... View Details
Gold Nanoparticles: Synthesis, Characterization, and Applications
by Bhagavanth Reddy Gangapuram (Author), Veerabhadram Guttena (Author)
Gold nanoparticles (AuNPs) have been considered an important area of research due to their unique and tunable surface plasmon and their applications. Eco-friendly and cost-effective procedures for the synthesis of nanoparticles are of interest to biologists, chemists and materials scientists alike, especially in the light of efforts to find “greener” methods for inorganic materials synthesis. Hence, a green approach to the synthesis of gold nanoparticles is the safest and most preferred route. In the present work natural gums such as gum tragacanth, gum karaya, gum kondagogu, gum acacia... View Details
Gold Nanoparticles: Properties, Characterization and Fabrication (Nanotechnology Science and Technology)
by P. E. Chow (Author)
Due to their attractive electronic, optical, and thermal properties; gold nanoparticles (AuNPs) have emerged with great interest, as well as catalytic properties, in the fields of physics, chemistry, biology, medicine, material science and some interdisciplinary fields. This book examines a broad range of applications of gold nanoparticles such as: gold nanoparticles as an antigen carrier and as an adjuvant; laser synthesis of gold nanoparticles and the control over their properties; gold on carbon catalysts; gold nanoparticles as a delivery vehicle in biomedical applications; solution and... View Details
Gold Nanoparticles: Synthesis, Optical Properties and Applications for Cancer Treatment (Nanotechnology Science and Technology)
by Abagail Jarnagin (Editor), Logan Halshauser (Editor)
In this book, the authors present current research in the study of the synthesis, optical properties and applications for cancer treatment of gold nanoparticles. Topics discussed include the use of gold nanoparticles in cancer treatment and biomedical applications to target tumors and provide detection, drug carriers, gene silencing and radiotherapy; gold nanoparticle fabrication by laser ablation technique and their optical and morphological study; gold nanoparticles for metabolite imaging; formation of gold nanoparticles inside the corona of amphiphilic triblock copolymer micelles; and more. View Details
Gold Nanoparticles in Biomedical Applications
by Lev Dykman (Author), Nikolai Khlebtsov (Author)
This book discusses fabrication of functionalized gold nanoparticles (GNPs) and multifunctional nanocomposites, their optical properties, and applications in biological studies. This is the very first book of its kind to comprehensively discuss published data on in vitro and in vivo biodistribution, toxicity, and uptake of GNP by mammalian cells providing a systematization of data over the GNP types and parameters, their surface functionalization, animal and cell models. As distinct from other related books, Gold Nanoparticles in Biomedical Applications discusses the... View Details
Assemblies of Gold Nanoparticles at Liquid-Liquid Interfaces: From Liquid Optics to Electrocatalysis (Springer Theses)
by Evgeny Smirnov (Author)
This book is devoted to various aspects of self-assembly of gold nanoparticles at liquid-liquid interfaces and investigation of their properties. It covers primarily two large fields: (i) self-assembly of nanoparticles and optical properties of these assemblies; and (ii) the role of nanoparticles in redox electrocatalysis at liquid-liquid interfaces. The first part aroused from a long-lasting idea to manipulate adsorption of nanoparticles at liquid-liquid with an external electric field to form 'smart' mirrors and/or filters. Therefore, Chapters 3 to 5 are dedicated to explore fundamental... View Details
Gold nanoparticles as delivery system against diseases
by Ardhendu Mandal (Author)
For the growing number of diseases caused by infectious pathogens as well as toxicants, it is necessary to develop targeted nanotechnology-based treatment systems. The treatments with conventional antimicrobial and anticarcinogenic agents against diseases have associated the development of multi-drug resistance, high toxic side effects, inadequate therapeutic index and low bioavailability of drugs. In this concern, site-specific drug delivery may be important to enhance drug-efficacy and reduce adverse side effects to host cells, while antimicrobial and anticarcinogenic nanosized gold... View Details