Three-dimensional chessboards

May 19, 2020

Osaka, Japan - Researchers at The Institute of Scientific and Industrial Research at Osaka University introduced a new liquid-phase fabrication method for producing nanocellulose films with multiple axes of alignment. Using 3D-printing methods for increased control, this work may lead to cheaper and more environmentally friendly optical and thermal devices.

Ever since appearing on the original Star Trek TV show in the 1960s, the game of "three-dimensional chess" has been used as a metaphor for sophisticated thinking. Now, researchers at Osaka University can say that they have added their own version, with potential applications in advanced optics and inexpensive smartphone displays.

Many existing optical devices, including liquid-crystal displays (LCDs) found in older flat-screen televisions, rely on long needle-shaped molecules aligned in the same direction. However, getting fibers to line up in multiple directions on the same device is much more difficult. Having a method that can reliably and cheaply produce optical fibers would accelerate the manufacture of low-cost displays or even "paper electronics"--computers that could be printed from biodegradable materials on demand.

Cellulose, the primary component of cotton and wood, is an abundant renewable resource made of long molecules. Nanocelluloses are nanofibers made of uniaxially aligned cellulose molecular chains that have different optical and heat conduction properties along one direction compared to the another.

In newly published research from the Institute of Scientific and Industrial Research at Osaka University, nanocellulose was harvested from sea pineapples, a kind of sea squirt. They then used liquid-phase 3D-pattering, which combined the wet spinning of nanofibers with the precision of 3D-printing. A custom-made triaxial robot dispensed a nanocellulose aqueous suspension into an acetone coagulation bath.

"We developed this liquid-phase three-dimensional patterning technique to allow for nanocellulose alignment along any preferred axis," says first author Kojiro Uetani. The direction of the patterns could be programmed so that it formed an alternating checkerboard pattern of vertically- and horizontally-aligned fibers.

To demonstrate the method, a film was sandwiched between two orthogonal polarizing films. Under the proper viewing conditions, a birefringent checkerboard pattern appeared. They also measured the thermal transfer and optical retardation properties.

"Our findings could aid in the development of next-generation optical materials and paper electronics," says senior author Masaya Nogi. "This could be the start of bottom-up techniques for building sophisticated and energy-efficient optical and thermal materials."
-end-
The article, "Checkered films of multiaxis oriented nanocelluloses by liquid-phase three-dimensional patterning," was published in Nanomaterials at DOI: https://doi.org/10.3390/nano10050958.

About Osaka University

Osaka University was founded in 1931 as one of the seven imperial universities of Japan and now has expanded to one of Japan's leading comprehensive universities. The University has now embarked on open research revolution from a position as Japan's most innovative university and among the most innovative institutions in the world according to Reuters 2015 Top 100 Innovative Universities and the Nature Index Innovation 2017. The university's ability to innovate from the stage of fundamental research through the creation of useful technology with economic impact stems from its broad disciplinary spectrum.

Website: https://resou.osaka-u.ac.jp/en/top

Osaka University

Related Nanocellulose Articles from Brightsurf:

Scientists use bacteria as micro-3D printers
A team at Aalto University has used bacteria to produce intricately designed three-dimensional objects made of nanocellulose.

Wearable sensors printed on natural materials analyze substances present in sweat
Applied to skin as a piece of sticking plaster, the device developed by Brazilian researchers can be used to monitor human metabolism and administer drugs.

From nanocellulose to gold
When nanocellulose is combined with various types of metal nanoparticles, materials are formed with many new and exciting properties.

The lightest shielding material in the world
Empa researchers have succeeded in applying aerogels to microelectronics: Aerogels based on cellulose nanofibers can effectively shield electromagnetic radiation over a wide frequency range - and they are unrivalled in terms of weight.

Three-dimensional chessboards
Scientists at Osaka University develop a liquid-phase method for 3D-printing nanocellulose fibers aligned in multiple directions.

Material manufacturing from particles takes a giant step forward
Tiny fibrils extracted from plants have been getting a lot of attention for their strength.

A cheap organic steam generator to purify water
A high-efficiency steam generator for the purification and desalination of water can be built using cheap and natural materials such as cellulose.

A sustainable new material for carbon dioxide capture
In a joint research study from Sweden, scientists from Chalmers University of Technology and Stockholm University have developed a new material for capturing carbon dioxide.

KRICT comes in as a new leading player in the monopolized bio-polycarbonate market
The Korea Research Institute of Chemical Technology(KRICT) developed a bio-polycarbonate which has been monopolized by Japan, and opened up the possibility of bio-polycarbonate commercialization. the Research Center for Bio-based Chemistry of KRICT utilized the plant-based components of isosorbide and nanocellulose to develop the bio-polycarbonate.

Biosynthesized fibers inspired strong and tough artificial nanocomposite fibers
Nanocellulose-based macrofibers are promising materials for future applications. Various strategies have been pursued to improve their strength.

Read More: Nanocellulose News and Nanocellulose Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.