Scientists proposed a novel configuration of nanoscopes

May 23, 2019

Scientists from Tomsk Polytechnic University together with colleagues proposed using special diffraction gratings with gold plates instead of microlenses used in the classic configuration to obtain images in nanoscopes. Microlenses transmit images by small pieces (pixels), whereas diffraction gratings allow you to see the whole object. Such innovation can help to accelerate the generation of images from nanoscopes without losing any magnification power. The results of the study are presented in the journal Annalen der Physik.

Optical microscopes are considered the simplest. However, for a long time it was believed that they are not powerful enough compared to, for example, electronic microscopes. Everything changed with the advent of nanoscopes in 2011. Images are obtained using small spheres or rectangular particles of quartz glass and enlarged further with a conventional microscope lens. Through nanoscopes it is possible to see objects the size of which is 50 nm, which exceeds the capabilities of a conventional optical microscope by 20 times. They can also be used to study living viruses, as compared to electronic microscopes lacking this function because the flow of electrons just kills them, and the inside of cells. This feature makes nanoscopes extremely promising for biological research. Therefore, scientists around the world are working to improve their resolution and design.

However, images in nanoscopes is formed by 'pieces', i.e. each microsphere detects its part of an object at a particular point. Therefore, it is necessary to make a whole matrix of a large number of microspheres or to move a microsphere, which takes some time.

As a solution, TPU scientists proposed using a rectangular mesoscale phase diffraction grating (a grating with a period comparable to the wavelength of the radiation used). This is an optical device that is a surface with a large number of parallel microscopic strokes or protrusions.

The project supervisor, Igor Minin, DSc in technical sciences, SRF at the TPU Division of Electronic Engineering says:

'A conventional diffraction grating out of dielectric ensures poor resolution in nanoscopes. Therefore, we propose to add a small gold plate to each of the strokes. In fact, a paradox emerges: metal does not transmit light but the resolution nevertheless increases. Why? Here several effects work simultaneously.

These are the effect of abnormal amplitude apodization, the Fabry-Perot resonance, and the Fano resonance. Together they help to improve resolution compared to a conventional diffraction grating up to 0.3 λ. This is about the same solution as that of nanoscopes with spherical particles.'

Now, the researchers are tasked to verify the simulation data during experiments.
The article was published in Annalen der Physik in collaboration with the scientists from Tomsk State University and V.E. Zuev Institute of Atmospheric Optics SB RAS.

Tomsk Polytechnic University

Related Microlenses Articles from Brightsurf:

Graphene microbubbles make perfect lenses
Jia and fellow researchers from Swinburne University of Technology recently teamed up with researchers from National University of Singapore, Rutgers University, University of Melbourne, and Monash University, to develop a method to generate precisely controlled graphene microbubbles on a glass surface using laser pulses.

Ultra-long-working-distance spectroscopy with 3D-printed aspherical microlenses
Researchers at the Faculty of Physics, University of Warsaw have demonstrated micrometre-sized 3D-printed aspherical microlenses which can replace bulky microscope objectives in spectroscopic measurements of single point-like light emitters (e.g. quantum dots or atomically thin 2D materials).

Biologically inspired ultrathin arrayed camera for high-contrast and high-resolution imaging
The vision systems in nature provide intriguing optical design inspiration for ultracompact imaging systems.

4D imaging with liquid crystal microlenses
Most images captured by a camera lens are flat and two dimensional.

On the way to intelligent microrobots
Researchers at the Paul Scherrer Institute PSI and ETH Zurich have developed a micromachine that can perform different actions.

Oscillation assisted 3D printing renders ultrafast fabrication of microlens array
An oscillation assisted digital light processing (DLP) based 3D printing approach is developed to enable ultrafast fabrication of microlens arrays with optically smooth surface (1 nm surface roughness) via a single 1-3 seconds exposure of grayscale UV light.

Mosquito eye inspires artificial compound lens (video)
Anyone who's tried to swat a pesky mosquito knows how quickly the insects can evade a hand or fly swatter.

New artificial compound eye could improve 3D object tracking
A newly created biologically inspired compound eye is helping scientists understand how insects use their compound eyes to sense an object and its trajectory with such speed.

Microscopic glass blowing used to make tiny optical lenses
Inserting air into hot glass to form a bubble has been used to make glass objects since Roman times.

Inexpensive, simple fabrication method poised to expand microlens applications
A growing number of applications, including smartphone cameras, depend on microlenses to boost performance.

Read More: Microlenses News and Microlenses Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to