A New Approach To Fusion Energy Is The Focus Of Two Projects At Cornell

May 24, 1996

ITHACA, N.Y. -- A new, essentially inexhaustible source of energy for the 21st century may result from experiments under way at Cornell University's Laboratory for Plasma Studies.

Fossil fuels? Forget it. They're a limited resource and pollute when burned. Nuclear fission reactors? Not in my backyard. Too dangerously radioactive. How about creating energy from fusion, the way the sun does?

"The problem of nuclear fusion is very important to society," said Cornell's Ravi Sudan, the IBM Professor of Engineering, professor of electrical engineering and of applied and engineering physics and a principal investigator on both the COBRA and FIREX projects. "We must have alternate energy sources. We must have technical options."

There are two approaches to using controlled nuclear fusion for energy production: magnetic fusion and inertial fusion. In the magnetic approach the hot plasma that generates the fusion reactions is confined by magnetic fields. The mainline approach for achieving magnetic fusion is the Tokamak program. In inertial fusion, tiny fuel capsules or pellets are compressed to 1,000 times liquid deuterium densities and heated to fusion ignition by pulsed, high-powered beams. Because the whole process should take place in only a few nanoseconds, the hot, dense plasma stays together because of its inertia. The mainline approach to inertial fusion uses laser beam drivers.

Cornell's experiments concern alternate approaches to both the mainline magnetic and inertial fusion approaches:

Both these projects utilize the technology of intense ion beams generated in diodes that were developed at Cornell. Sudan and Stanley Humphries, former research associate in the Laboratory of Plasma Studies, hold the first patent on this technology.

Bruce R. Kusse, professor of applied and engineering physics and director of the Laboratory of Plasma Studies, said that the general public is not very concerned about finding non-fossil fuel energy sources even though the basic research required to come up with them has to be done well in advance.

"The general public interest has waned because the prices for coal, oil and natural gas are not that bad. But the supplies of these fossil fuels have finite lifetimes," Kusse said. "If we wait until they are exhausted to develop new sources, we will be in trouble."

Early in the next century, scientists anticipate achieving inertial fusion ignition at the National Ignition Facility (NIF). The NIF will focus the energy from an extremely powerful laser to "ignite" small capsules filled with fusion fuel, creating fusion reactions and liberating more energy than was used to start the process. Crandall, NIF project director, described the program at the meeting here. The NIF will cost $1.1 billion dollars and take seven years to build.

The magnetic fusion program, has focused on the Tokamak approach, with the next step a $10 billion international program known as the International Thermonuclear Experimental Reactor (ITER). It is in the design phase and may result in an internationally constructed and operated Tokamak reactor.

The advantages of using fusion energy sources are that the fuel is cheap and plentiful and the reactors will present less of a radiation hazard than the current fission power plants.

"While the fuel for a fusion reactor is cheap, the mainline approaches are leading to large, complicated and, therefore, expensive reactor designs," Kusse said. "This is why it is important to investigate alternative fusion schemes that can result in more compact power plants."

COBRA will be capable of reaching 600 gigawatts of beam power over 20 to 40 nanoseconds. It will investigate the use of ion beams as an alternative to laser beams as a driver for inertial fusion. "Ion production is much more efficient than photon production by lasers. Our experiments are aimed toward the long term, for the next phase after the NIF is finished," Sudan said. Initial experiments on COBRA will look at the transport and focusing of intense ion beams.

"At these high intensities, these currents have never been focused before. We've done a lot of theoretical work on this, to determine what conditions are needed in order to focus such an ion beam," Sudan said, adding that experimental work has been done as well but not at these power levels. Hammer, Kusse and Sudan are principal investigators on this roject. The experimental work is being carried out in collaboration with John Greenly.

FIREX is a 1-megavolt machine that is expected to produce a peak current of 700 kiloamps over 130 nanoseconds. This experiment in magnetic fusion will help determine if the mainline Tokamak scheme, such as the TFTR machine at Princeton University, should be replaced with an alternative.

"We think Tokamaks lead to reactors that are too big and costly," Sudan said. Using resources of the Cornell Theory Center, Yuri Omelchenko, a research associate in the Laboratory of Plasma Studies, has simulated how to form an ion ring using magnets to hannel the ion beam. Based on that, the experiment was designed, and "we expect to produce a field reversed ring within a year," Sudan said. If successful, "then we'll have a long-range program." This work will be carried out as a collaboration among Greenly, Hammer and Sudan.

Currently, the DOE is spending $244 million annually on magnetic fusion (including the U.S. contribution to ITER) and $180 million on inertial confinement fusion (independent of NIF construction). Magnetic fusion funding declined in the last year and, according to the DOE's Davies, has caused the DOE to review its priorities. "While the U.S. participation in ITER will be reduced," Kusse said, "the DOE has indicated an increased interest in the type of alternate fusion schemes that we are pursuing at Cornell."

Cornell University

Related Nuclear Fusion Articles from Brightsurf:

An unprecedented discovery of cell fusion
Understanding how bacteria interact is critical to solving growing problems such as antibiotic resistance, in which infectious bacteria form defenses to thwart the medicines used to fight them.

Lose weight of fusion reactor component
Superconducting coils in a fusion power reactor exert a huge electromagnetic force.

Nuclear medicine and COVID-19: New content from The Journal of Nuclear Medicine
In one of five new COVID-19-related articles and commentaries published in the June issue of The Journal of Nuclear Medicine, Johnese Spisso discusses how the UCLA Hospital System has dealt with the pandemic.

Story tips: Shuffling atoms, thinning forests, fusion assembly and nuclear medicine
ORNL Story Tips: Shuffling atoms, thinning forests, fusion assembly and nuclear medicine.

Discovery about the edge of fusion plasma could help realize fusion power
Unique PPPL simulations reveal new understanding of the highly complex edge of fusion plasmas.

Feeding fusion: hydrogen ice pellets prove effective for fueling fusion plasmas
Injecting pellets of hydrogen ice rather than puffing hydrogen gas improves fusion performance.

Fusion by strong lasers
Nuclear physics usually involves high energies, as illustrated by experiments to master controlled nuclear fusion.

Electrical stimulation aids in spinal fusion
Spine surgeons in the U.S. perform more than 400,000 spinal fusions each year as a way to ease back pain and prevent vertebrae in the spine from wiggling around and doing more damage.

Nuclear physics -- probing a nuclear clock transition
Physicists have measured the energy associated with the decay of a metastable state of the thorium-229 nucleus.

The key to unlock bacterial fusion
Researchers identify how a Chlamydia-produced protein helps bacterial compartments fuse together, thus increasing pathogenicity.

Read More: Nuclear Fusion News and Nuclear Fusion Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.