SUTD developed a simple method to print planar microstructures of polysiloxane

May 28, 2020

Polysiloxane is an elastic polymer which is widely used in fluidics, optics, and biomedical engineering. It offers desirable properties for microfabrication due to its castable and curable properties.

To produce small scale structures consisting of polysiloxane, soft lithography is used as a standard technique in academic research laboratories.

Recent advances in digital fabrication, in particular 3D printing, have enabled direct patterning of polysiloxane albeit with strict requirements for the properties of the printing inks. Suitable inks are usually highly viscous and fast-curing. For 3D printing, the yield stress or photocurable characteristics of the polysiloxane resins are required to allow them to retain the printed shape.

The low viscosity of the additive-curing polysiloxane makes them incompatible for printing with direct ink writing (DIW) 3D printers. While the low viscosity of the polysiloxane resin such as Sylgard 184 facilitates easy extrusion through the nozzles, the reflow of the patterned resin can compromise the print fidelity.

Researchers from Singapore University of Technology and Design's (SUTD) Soft Fluidics Lab developed a simple method to fabricate reproducible planar microstructures consisting of polysiloxane using commercially available liquid polysiloxane resins without changing their properties.

In this newly developed approach, curable liquid polysiloxane with the viscosity in the range of 1-100 Pa.s was dispensed in a liquid immiscible with the resins such as methanol, ethanol, and isopropanol. The contact angle of the dispensed polysiloxane on the substrate increased from 20o in the air to 100o in alcohols. The increase in the contact angles allowed maintaining the structures of patterned polysiloxane until curing, after which the embedding liquid was readily removed by evaporation. The method was termed as embedded ink writing (EIW) (refer to image).

"With EIW, polysiloxane inks can be patterned on different soft and rigid substrates without compromising the adhesion of the printed polysiloxane with the substrate," explained lead author Dr. Rahul Karyappa from SUTD.

"The presence of embedding media did not hamper the bonding of the polysiloxane filaments in both lateral and vertical arrangements, allowing this technology to be effective especially in fabricating flexible devices and microfluidic devices using commercially available PDMS resin," added principal investigator, Assistant Professor Michinao Hashimoto from SUTD.
-end-
The research work was published in ACS Applied Materials and Interfaces, a leading journal that encourages newly-discovered materials and interfacial processes. Terry Ching, a PhD scholar at SUTD, also participated in this research project.

Singapore University of Technology and Design

Related Viscosity Articles from Brightsurf:

Artificial Intelligence has learned to estimate oil viscosity
A group of Skoltech scientists developed machine learning (ML) algorithms that can teach artificial intelligence (AI) to determine oil viscosity based on nuclear magnetic resonance (NMR) data.

Deep magma facilitates the movement of tectonic plates
A small amount of molten rock located under tectonic plates encourages them to move.

When honey flows faster than water
Physicists surprised to find that in specially coated tubes, the more viscous a liquid is, the faster it flows

Bristol scientists shine light on tiny crystals behind unexpected violent eruptions
In a new study of volcanic processes, Bristol scientists have demonstrated the role nanolites play in the creation of violent eruptions at otherwise 'calm' and predictable volcanoes.

Inexpensive, non-toxic nanofluid could be a game-changer for oil recovery
Researchers from the University of Houston have demonstrated that an inexpensive and non-toxic nanofluid can be used to efficiently recover even heavy oil with high viscosity from reservoirs.

Oil-soluble transition metal-based catalysts tested for in-situ oil upgrading
The results of the study showed that the good catalytic properties of the new transition metal catalysts, as well as their low cost and easy accessibility, make them a potential solution in the aquathermolysis reaction and heavy oil recovery.

Key technology for mass-production of lignin-bio-aviation fuels for reducing greenhouse gas
The team, led by Dr. Jeong-Myeong Ha of the Clean Energy Research Center at the Korea Institute of Science and Technology(KIST), has developed a technology that can be used to mass-produce aviation-grade fuels from wood wastes.

Airborne chemicals could become less hazardous, thanks to a missing math formula
Purdue researchers have figured out a way to calculate surface viscosity just by looking at a stretched droplet as it starts to break.

Nickel-based catalysts tested at Boca de Jaruco oilfield in Cuba
In this publication, the authors studied transformations of asphaltenes, the compounds determining the viscosity of petroleum.

SUTD developed a simple method to print planar microstructures of polysiloxane
SUTD developed the embedded ink writing (EIW) method, enabling the direct writing of polysiloxane which helps in the fabrication of microfluidic devices, flexible wearables, and soft actuators.

Read More: Viscosity News and Viscosity Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.