New printable robots could self-assemble when heated

May 30, 2014

Printable robots -- those that can be assembled from parts produced by 3-D printers -- have long been a topic of research in the lab of Daniela Rus, the Andrew and Erna Viterbi Professor of Electrical Engineering and Computer Science at MIT.

At this year's IEEE International Conference on Robotics and Automation, Rus' group and its collaborators introduce a new wrinkle on the idea: bakable robots.

In two new papers, the researchers demonstrate the promise of printable robotic components that, when heated, automatically fold into prescribed three-dimensional configurations.

One paper describes a system that takes a digital specification of a 3-D shape -- such as a computer-aided design, or CAD, file -- and generates the 2-D patterns that would enable a piece of plastic to reproduce it through self-folding.

The other paper explains how to build electrical components from self-folding laser-cut materials. The researchers present designs for resistors, inductors, and capacitors, as well as sensors and actuators -- the electromechanical "muscles" that enable robots' movements.

"We have this big dream of the hardware compiler, where you can specify, 'I want a robot that will play with my cat,' or 'I want a robot that will clean the floor,' and from this high-level specification, you actually generate a working device," Rus says. "So far, we have tackled some subproblems in the space, and one of the subproblems is this end-to-end system where you have a picture, and at the other end, you have an object that realizes that picture. And the same mathematical models and principles that we use in this pipeline we also use to create these folded electronics."

Both papers build on previous research that Rus did in collaboration with Erik Demaine, another professor of computer science and engineering at MIT. This work explored how origami could be adapted to create reconfigurable robots.

All the angles

The key difference in the new work, explains Shuhei Miyashita, a postdoc in Rus' lab and one of her co-authors on both papers, is a technique for precisely controlling the angles at which a heated sheet folds. Miyashita sandwiches a sheet of polyvinyl chloride (PVC) between two films of a rigid polyester riddled with slits of different widths. When heated, the PVC contracts, and the slits close. Where edges of the polyester film press up against each other, they deform the PVC.

Imagine, for instance, a slit in the top polyester film and another parallel to it in the bottom film. But suppose, too, that the slit in the top film is narrower than that on the bottom. As the PVC contracts, the edges of the top slit will press against each other, but there will still be a gap between the edges of the bottom slit. The entire sheet will then bend downward until the bottom edges meet as well. The final angle is a function of the difference in the widths of the top and bottom slits.

But producing the pattern of slits is not as simple as just overlaying them on an origami crease pattern and adjusting the widths accordingly, Rus says. "You're doing this really complicated global control that moves every edge in the system at the same time," she says. "You want to design those edges in such a way that the result of composing all these motions, which actually interfere with each other, leads to the correct geometric structure."

ByoungKwon An, another of Rus' students, is lead author on the paper describing the system for interpreting 3-D images. He's joined by Rus, Miyashita, Demaine, and five other researchers both at MIT and in the lab of professor Robert Wood at Harvard University.

Current events

Miyashita is lead author on the other paper, whose coauthors include, in addition to Rus, researchers at the University of Zurich and the University of Tokyo.

In that paper, the researchers describe using a polyester coated with aluminum to create foldable electronic components. Miyashita designed those components by hand, since it was necessary to prescribe not just their geometric properties but also their electrical properties. The sensor Miyashita designed looks kind of like a small accordion. Each of the accordion folds contains a separate resistor, and when the folds are compressed, the total resistance changes proportionally, with a measurable effect on a current passing through the sensor.

The actuator -- which would enable a robot to move -- is a foldable coil, which would need to be augmented with a pair of iron cylinders that could be magnetized by an electrical current. Aluminum isn't a good enough conductor to yield an actuator that exerts much force, but a copper-coated polyester should do the trick.
-end-
Written by Larry Hardesty, MIT News Office

Additional background

ARCHIVE:Soft robotic fish moves like the real thing

http://newsoffice.mit.edu/2014/soft-robotic-fish-moves-like-the-real-thing-0313

ARCHIVE: Surprisingly simple scheme for self-assembling robots

http://newsoffice.mit.edu/2013/simple-scheme-for-self-assembling-robots-1004

Massachusetts Institute of Technology

Related Robot Articles from Brightsurf:

Autonomous robot plays with NanoLEGO
Atoms and molecules behave in a completely different way to macroscopic objects and each brick requires its own ''instruction manual''.

Robot technology for everyone or only for the average person?
Robot technology is being used more and more in health rehabilitation and in working life.

Soft robot, unplugged
It's balloon art on steroids: a pneumatic, shape-changing soft robot capable of navigating its environment without requiring a tether to a stationary power source.

Trash talk hurts, even when it comes from a robot
Trash talking has a long and colorful history of flustering game opponents, and now researchers at Carnegie Mellon University have demonstrated that discouraging words can be perturbing even when uttered by a robot.

A robot with a firm yet gentle grasp
Human hands are skilled at manipulating a range of objects.

You can't squash this roach-inspired robot
A new insect-sized robot created by researchers at the University of California, Berkeley, can scurry across the floor at nearly the speed of a darting cockroach -- and it's nearly as hardy as a cockroach, too: Try to squash this robot under your foot, and more than likely, it will just keep going.

In the shoes of a robot: The future approaches
Identifying with someone is an exercise that makes us understand them deeply, empathize with them, and helps us overcome mistrust and prejudice.

Now your phone can become a robot that does the boring work
Purdue University researchers have developed a smartphone app that allows a user to easily program any robot to perform a task, dramatically bringing down the costs of building and programming mobile robots.

Better together: human and robot co-workers
More and more processes are being automated and digitised. Self-driving delivery vehicles, such as forklifts, are finding their way into many areas -- and companies are reporting potential time and cost savings.

Robot therapists need rules
Interactions with artificial intelligence (AI) will become an increasingly common aspect of our lives.

Read More: Robot News and Robot Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.