Nav: Home

Inexpensive, simple fabrication method poised to expand microlens applications

June 12, 2019

WASHINGTON -- A growing number of applications, including smartphone cameras, depend on microlenses to boost performance. A newly developed technology, called laser catapulting, could make it much easier and less expensive to fabricate these miniaturized lenses with customized properties, such as shape or focusing power.

In The Optical Society (OSA) journal Optical Materials Express, researchers from Istituto Italiano di Tecnologia in Italy describe their new laser-additive method for creating microlenses using a single laser pulse. The technology even allows microlenses and microlens arrays to be fabricated directly on cameras or solar cells.

Microlenses improve the performance of cameras and solar cells by concentrating light into the most sensitive areas of the devices. For example, they are widely used in the newest smartphone cameras to increase sensitivity and imaging speed in low-light conditions.

"Our fabrication approach simplifies the production of lenses while allowing more variety in the design and more flexibility in the environments where microlenses can be used," said research team leader Martí Duocastella. "In addition to completely new applications, this method could lead to new cameras that acquire video under low light conditions, solar cells with improved efficiency and microscopes that are better at capturing fast processes."

Catapulting with light

Although micro-optics are commercially available, they can be prohibitively expensive and hard to add to existing devices. Even with traditional microlens fabrication methods such as photolithography, it is difficult to integrate lenses or to make very densely packed microlens arrays.

The researchers developed catapulting to overcome these limitations. The method uses a laser pulse to remove and catapult a micro disk from a thin polymeric film and drop it onto a defined region of interest. The polymer in the microdisk is then heated so it can thermally reflow, allowing capillary forces -- the same ones that make water droplets spherical -- to shape the microdisk into a round lens. Changing the shape of the laser beam allows fabrication of microlenses with different focusing properties or shapes, such as rectangular, triangular or circular.

"Laser catapulting connects the dots between existing laser-based fabrication methods to solve problems with current microlens fabrication strategies," said Duocastella. "It fills the gap between the growing number of applications that require microlenses and the technologies capable of generating on-demand customized micro-optics."

After studying the relationship between the laser beam shape and the resulting microdisks, the researchers explored the reproducibility, precision and accuracy of their technique. Their analysis showed that the method could be used to reproducibly produce microlenses with radiuses between 50 and 250 microns and very high smoothness. Measuring the optical properties of the microlenses and the light collection capabilities of microlens arrays made with the technique showed that these micro-optics exhibited diffraction-limited performance, meaning that they were as good as theory allows.

The researchers say that laser catapulting could be combined with fast laser beam shaping methods for on-the-fly control of optical performance and shape of individual microlenses within an array.

Capturing fast biological processes

The researchers plan to use laser catapulting to fabricate microlenses on top of photodetector arrays so they can develop a high-speed 3D microscopy system to characterize very fast biological processes, such as neuronal communications or virus trafficking. The microlenses will increase the light-collecting efficiency of the photodetectors and thus decrease imaging time.

"These novel photodetector arrays offer important advantages compared to confocal microscopy but can't collect as much light as traditional single point detectors," said Duocastella. "We believe that microlenses, and laser catapulting in particular, will help improve the performance of these photodetector arrays and expand their use among the microscopy community."
-end-
Paper: S. Surdo, A. Diaspro, M. Duocastella, "Geometry-controllable micro-optics with laser catapulting," Opt. Mater. Express 9, 7, 2892-2901 (2019).

DOI: https://doi.org/10.1364/OME.9.002892.

About Optical Materials Express

Optical Materials Express (OMEx) is an open-access journal focusing on the synthesis, processing and characterization of materials for applications in optics and photonics. OMEx, which launched in April 2011, primarily emphasizes advances in novel optical materials, their properties, modeling, synthesis and fabrication techniques; how such materials contribute to novel optical behavior; and how they enable new or improved optical devices. The editor-in-chief for OMEx is Alexandra Boltasseva from Purdue University. For more information, visit: OSA Publishing.

About The Optical Society

Founded in 1916, The Optical Society (OSA) is the leading professional organization for scientists, engineers, students and business leaders who fuel discoveries, shape real-life applications and accelerate achievements in the science of light. Through world-renowned publications, meetings and membership initiatives, OSA provides quality research, inspired interactions and dedicated resources for its extensive global network of optics and photonics experts. For more information, visit osa.org.

Media Contact:

mediarelations@osa.org

The Optical Society

Related Solar Cells Articles:

Solar cells with new interfaces
Scientists from NUST MISIS (Russia) and University of Rome Tor Vergata found out that a microscopic quantity of two-dimensional titanium carbide called MXene significantly improves collection of electrical charges in a perovskite solar cell, increasing the final efficiency above 20%.
Welcome indoors, solar cells
Swedish and Chinese scientists have developed organic solar cells optimised to convert ambient indoor light to electricity.
Mapping the energetic landscape of solar cells
A new spectroscopic method now makes it possible to measure and visualize the energetic landscape inside solar cells based on organic materials.
Solar energy becomes biofuel without solar cells
Soon we will be able to replace fossil fuels with a carbon-neutral product created from solar energy, carbon dioxide and water.
A good first step toward nontoxic solar cells
A team of engineers at Washington University in St. Louis has found what they believe is a more stable, less toxic semiconductor for solar applications, using a novel double mineral discovered through data analytics and quantum-mechanical calculations.
More Solar Cells News and Solar Cells Current Events

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Rethinking Anger
Anger is universal and complex: it can be quiet, festering, justified, vengeful, and destructive. This hour, TED speakers explore the many sides of anger, why we need it, and who's allowed to feel it. Guests include psychologists Ryan Martin and Russell Kolts, writer Soraya Chemaly, former talk radio host Lisa Fritsch, and business professor Dan Moshavi.
Now Playing: Science for the People

#537 Science Journalism, Hold the Hype
Everyone's seen a piece of science getting over-exaggerated in the media. Most people would be quick to blame journalists and big media for getting in wrong. In many cases, you'd be right. But there's other sources of hype in science journalism. and one of them can be found in the humble, and little-known press release. We're talking with Chris Chambers about doing science about science journalism, and where the hype creeps in. Related links: The association between exaggeration in health related science news and academic press releases: retrospective observational study Claims of causality in health news: a randomised trial This...