Perovskite solar cells tested for real-world performance -- in the lab

June 20, 2019

It was only ten years ago that metal-halide perovskites were discovered to be photovoltaic materials. Today, perovskite solar cells made are almost as efficient as the best conventional silicon ones, and there is much hope that they will become a highly efficient and low-cost alternative, as they can be manufactured by rather simple and fast methods like printing.

The major obstacle for commercialization is the stability of perovskite devices. Operational stability is commonly assessed either by continuous illumination in the lab or by outdoor testing. The first approach has the disadvantage of not accounting for real-world operation variations in irradiance and temperature because of day-night and season changes. These are especially important for perovskite solar cells because of their slow response times.

On the other hand, outdoor tests require that the devices are encapsulated to protect them against exposure to harsh weather conditions. But encapsulation mainly addresses parasitic failure mechanisms that are not necessarily related to the perovskite material itself.

To escape from this dilemma, Wolfgang Tress, a scientist with the lab of Anders Hagfeldt at EPFL, working with colleagues at the lab of Michael Grätzel, brought the real-world conditions into the controlled environment of the lab. Using data from a weather station near Lausanne (Switzerland) they reproduced the real-world temperature and irradiance profiles from specific days during the course of the year. With this approach, the scientists were able to quantify the energy yield of the devices under realistic conditions. "This is what ultimately counts for the real-world application of solar cells," says Tress.

The study found that temperature and irradiance variations does not affect the performance of perovskite solar cells in any dramatic way, and although the efficiency of the cells decreases slightly during the course of a day, it recovers during the night.

"The study provides a further step towards the assessment of the performance and reliability of perovskite solar cells under realistic operation conditions," says Tress.
-end-
Reference

Wolfgang Tress, Konrad Domanski, Brian Carlsen, Anand Agarwalla, Essa A. Alharbi, Michael Graetzel & Anders Hagfeldt. Performance of perovskite solar cells under simulated temperature-illumination real-world operating conditions. Nature Energy 17 June 2019. DOI: 10.1038/s41560-019-0400-8

Ecole Polytechnique Fédérale de Lausanne

Related Solar Cells Articles from Brightsurf:

Solar cells of the future
Organic solar cells are cheaper to produce and more flexible than their counterparts made of crystalline silicon, but do not offer the same level of efficiency or stability.

A blast of gas for better solar cells
Treating silicon with carbon dioxide gas in plasma processing brings simplicity and control to a key step for making solar cells.

Record efficiency for printed solar cells
A new study reports the highest efficiency ever recorded for full roll-to-roll printed perovskite solar cells.

Next gen solar cells perform better when there's a camera around
A literal ''trick of the light'' can detect imperfections in next-gen solar cells, boosting their efficiency to match that of existing silicon-based versions, researchers have found.

On the trail of organic solar cells' efficiency
Scientists at TU Dresden and Hasselt University in Belgium investigated the physical causes that limit the efficiency of novel solar cells based on organic molecular materials.

Exciting tweaks for organic solar cells
A molecular tweak has improved organic solar cell performance, bringing us closer to cheaper, efficient, and more easily manufactured photovoltaics.

For cheaper solar cells, thinner really is better
Researchers at MIT and at the National Renewable Energy Laboratory (NREL) have outlined a pathway to slashing costs further, this time by slimming down the silicon cells themselves.

Flexible thinking on silicon solar cells
Combining silicon with a highly elastic polymer backing produces solar cells that have record-breaking stretchability and high efficiency.

Perovskite solar cells get an upgrade
Rice University materials scientists find inorganic compounds quench defects in perovskite-based solar cells and expand their tolerance of light, humidity and heat.

Can solar technology kill cancer cells?
Michigan State University scientists have revealed a new way to detect and attack cancer cells using technology traditionally reserved for solar power.

Read More: Solar Cells News and Solar Cells Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.