Researchers sharply reduce time needed for glass and ceramic 3D printing

June 24, 2020

The fabrication of complex ceramic or glass structures via stereolithography, a type of 3D printing, has long been held back by how much time it takes at the back-end of the process, which can take up to two days. A new technique reduces this time down to less than 5 hours.

Stereolithography prints objects from CAD files out of a powder suspended in a liquid. Objects are built layer by layer out of this liquid by shining a light, or laser, into the liquid-and-powder suspension, also called a "colloid." (Milk, for example, is also a colloid, but of milk fats suspended in water)

The laser causes some of the particles that are sensitive to light to join up together, or "cross-link," and form layers made of particles embedded in polymers (long chains of molecules)--a hardening process called "curing." The laser in effect "writes" layers in the liquid suspension, and these layers, printed out on top of one another, form a 3D object composed of the binding agent and the powder.

Ceramic or glass stereolithography holds the potential to fabricate parts with much more accurate and complex geometries--including hollow objects or ones with intricate internal structures that can reduce weight while maintaining strength--than could ever be achieved by conventional manufacturing with these substances. Such complexity of ceramic and glass design offers a raft of new biomedical, structural, and energy system applications.

The cured object, termed 'green' once it has been printed, still has a couple of additional stages to go though at high temperature: debinding--or removal of its binding agents--and sintering--the fusing of the powder particles firmly together. After debinding, the object is termed 'brown', and the finished product can be obtained after sintering.

However, in order to avoid structural collapse during this process--as a result of the production of gas bubbles that could shatter the strong but brittle ceramic or glass--debinding and sintering are performed extremely slowly, typically taking up to 48 hours.

"Until now, this time-consuming and costly constraint has limited 3D printed glass and ceramic parts to highly specialized applications," said Motoyuki Iijima, an engineering researcher at Yokohama National University, whose team has developed a new colloid recipe that sharply reduces the time needed for debinding and sintering.

"What you want instead is to get closer to the speed of conventional glass or ceramic production but combined with the complexity offered by 3D printing and similar additive manufacturing processes."

The research team published their findings in the journal Communications Materials on May 20.

To prove their recipe concept, the researchers wanted to manufacture transparent glass. This particular colloid recipe takes silica (SiO2) particles that have been modified with polyethyleneimine (a type of polymer) and oleic acid, a type of fatty acid that occurs in many animal and vegetable fats or oils. These particles are then mixed in an alcohol-based solvent along with a photo-initiator--the recipe ingredient that is sensitive to light and initiates the curing.

Crucially, the recipe also allows for a much smaller amount of monomers--the particles that perform the cross-linking--than is normal in glass and ceramic stereolithography, and encourages more cross-linking by other particles.

Normally, the large amount of monomers is what requires the slow debinding and sintering process because a rapid burning of monomers would generate the gas that threatens the structure of the object.

By being able to use only tiny amounts of monomers in the colloid, the researchers managed to get the debinding and sintering time down to less than 5 hours.

Having demonstrated how much faster this process can be performed for transparent glass, the researchers now want to extend the liquid suspension recipe, with its short processing time, to any kind of ceramic or glass.
-end-
Yokohama National University (YNU or Yokokoku) is a Japanese national university founded in 1949. YNU provides students with a practical education utilizing the wide expertise of its faculty and facilitates engagement with the global community. YNU's strength in the academic research of practical application sciences leads to high-impact publications and contributes to international scientific research and the global society. For more information, please see: https://www.ynu.ac.jp/english/

Yokohama National University

Related Laser Articles from Brightsurf:

Laser-powered nanomotors chart their own course
The University of Tokyo introduced a system of gold nanorods that acts like a tiny light-driven motor, with its direction of motion is determined by the orientation of the motors.

What laser color do you like?
Researchers at the National Institute of Standards and Technology (NIST) and the University of Maryland have developed a microchip technology that can convert invisible near-infrared laser light into any one of a panoply of visible laser colors, including red, orange, yellow and green.

Laser technology: The Turbulence and the Comb
While the light of an ordinary laser only has one single, well-defined wavelength, a so-called ''frequency comb'' consists of different light frequencies, which are precisely arranged at regular distances, much like the teeth of a comb.

A laser for penetrating waves
The 'Landau-level laser' is an exciting concept for an unusual radiation source.

Laser light detects tumors
A team of researchers from Jena presents a groundbreaking new method for the rapid, gentle and reliable detection of tumors with laser light.

The first laser radio transmitter
For the first time, researchers at Harvard School of Engineering have used a laser as a radio transmitter and receiver, paving the way for towards ultra-high-speed Wi-Fi and new types of hybrid electronic-photonic devices.

The random anti-laser
Scientists at TU Wien have found a way to build the 'opposite' of a laser -- a device that absorbs a specific light wave perfectly.

Laser 'drill' sets a new world record in laser-driven electron acceleration
Combining a first laser pulse to heat up and 'drill' through a plasma, and another to accelerate electrons to incredibly high energies in just tens of centimeters, scientists have nearly doubled the previous record for laser-driven particle acceleration at Berkeley Lab's BELLA Center.

Laser physics: Transformation through light
Laser physicists have taken snapshots of how C60 carbon molecules react to extremely short pulses of intense infrared light.

Laser-induced graphene gets tough, with help
Laser-induced graphene created at Rice University combines with many materials to make tough, conductive composites for wearable electronics, anti-icing, antimicrobial applications, sensors and water treatment.

Read More: Laser News and Laser Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.