Solving a condensation mystery

June 25, 2019

Condensation might ruin a wood coffee table or fog up glasses when entering a warm building on a winter day, but it's not all inconveniences; the condensation and evaporation cycle has important applications.

Water can be harvested from "thin air," or separated from salt in desalination plants by way of condensation. Due to the fact condensing droplets take heat with them when they evaporate, it's also part of the cooling process in the industrial and high-powered computing arenas. Yet when researchers took a look at the newest method of condensation, they saw something strange: When a special type of surface is covered in a thin layer of oil, condensed water droplets seemed to be randomly flying across the surface at high velocities, merging with larger droplets, in patterns not caused by gravity.

"They're so far apart, in terms of their own, relative dimensions" -- the droplets have a diameter smaller than 50 micrometers -- "and yet they're getting pulled, and moving at really high velocities," said Patricia Weisensee, assistant professor of mechanical engineering & materials science in the McKelvey School of Engineering at Washington University in St. Louis.

"They're all moving toward the bigger droplets at speeds of up to 1 mm per second."

Weisensee and Jianxing Sun, a PhD candidate in her lab, have determined that the seemingly-erratic movement is the result of unbalanced capillary forces acting on the droplets. They also found that the droplets' speed is a function of the oil's viscosity and the size of the droplets, which means droplet speed is something that can be controlled.

Their results were published online in Soft Matter.


In the most common type of condensation in industry, water vapor condenses to form a thick layer of liquid on a surface. This method is known as "filmwise" condensation. But another method has been shown to be more efficient at promoting condensation and the transfer of heat that comes along with it: dropwise condensation.

It has been used on traditionally hydrophobic surfaces -- those that repel water such as the Teflon coating on a non-stick pan. However, these traditional non-wetting surfaces degrade rapidly when exposed to hot vapor. Instead, a few years ago, researchers discovered that infusing a rough or porous hydrophobic surface with a lubricant, such as oil leads to faster condensation. Importantly, these lubricant-infused surfaces (LIS) led to the formation of highly mobile and smaller water droplets, which are responsible for most of the heat transfer when it comes to condensation and evaporation.

During the process, however, the movement of water droplets on the surface seemed erratic -- and fast. "They move at a really high velocity for their size," -- about 100 microns --"just by sitting there," Weisensee said.

"The question is, 'Why are they moving?' "

Using high-speed microscopy and interferometry to watch the process play out, Weisensee and her team were able to discern what was happening and the relationships between droplet size, speed and oil viscosity.

They created water vapor and watched as small droplets formed on the surface. "The first process is that small droplets coalesce and form bigger droplets," Weisensee said. Capillary forces cause the oil to grow up and over the droplets, forming a meniscus -- not the knee muscle, but rather a curved layer of oil surrounding the droplet.

The oil is continuously moving around, trying to strike a balance as it covers different-sized droplets in different places on the surface -- if a large droplet forms here, the meniscus stretches over it, causing the oil layer to contract somewhere else. Any smaller droplets in the area of contraction are swiftly pulled to the larger droplets, leading to oil-rich and oil-poor regions.

During the process, larger droplets are essentially clearing the space, which in turn makes room for the formation of more small droplets.

Since most of the heat transfer (about 85 percent) occurs via these small droplets, using LIS for dropwise condensation should be a more efficient way to disperse of heat and get water from vapor. And since the droplets are very small, less than 100 microns in diameter, condensation can occur in a smaller area.

There's another benefit, too. During "traditional" condensation, gravity is the force that clears water from the surface, making room for new droplets to form. The surface is placed vertically, and the water simply runs off. Since capillary forces are doing the work in dropwise condensation on liquid-infused surfaces, however, the orientation of the surface is of no consequence.

"It could potentially be used on personal devices," where orientation is constantly changing, she said, "or in space." And because the entire process is more efficient than traditional condensation, Weisensee said, "This might be a nice way of clearing up space without having to rely on gravity."

Going forward, Weisensee's team will measure heat transfer to determine if the smaller droplets during dropwise condensation on LIS are, in fact, more efficient. They also plan to investigate different surfaces in order to maximize droplet movement.
The McKelvey School of Engineering at Washington University in St. Louis focuses intellectual efforts through a new convergence paradigm and builds on strengths, particularly as applied to medicine and health, energy and environment, entrepreneurship and security. With 96.5 tenured/tenure-track and 33 additional full-time faculty, 1,361 undergraduate students, 1,291 graduate students and 21,000 alumni, we are working to leverage our partnerships with academic and industry partners -- across disciplines and across the world -- to contribute to solving the greatest global challenges of the 21st century.

Washington University in St. Louis

Related Heat Transfer Articles from Brightsurf:

Researchers generalize Fourier's heat equation, explaining hydrodynamic heat propagatio
Researchers have developed a novel set of equations for heat propagation that explain why and how heat propagation can become fluid-like, rather than diffusive.

Shape affects performance of micropillars in heat transfer
A Washington University in St. Louis researcher has shown for the first time that the shape of a nanostructure has an effect on its ability to retain water.

A new model of heat transfer in crystals was developed by Russian scientists
The understanding of atomic level processes opens a wide range of prospects in nanoelectronics and material engineering.

A 2 nm sized nanomachine able to spin and transfer its rotational energy
A collaboration of researchers in France, Japan and the United States have developed a new nanosized propeller which can act as gears.

Toward molecular computers: First measurement of single-molecule heat transfer
Heat transfer through a single molecule has been measured for the first time by an international team of researchers led by the University of Michigan.

Using data to decide when to transfer patients by medical helicopter
A Cleveland, Ohio nursing scientist is leading a study he believes will support what he says is a much-needed change in how medical helicopters are used -- especially for transfers between hospitals.

Researchers discover new charge transfer and separation process
SUTD worked with an international team of researchers to discover a new charge transfer and separation process named Twisted Intramolecular Charge Shuttle (TICS), paving a new avenue for chemists to construct unique and useful fluorescent probes in a wide range of chemical families of fluorophores.

Spin lasers facilitate rapid data transfer
Engineers have developed a novel concept for rapid data transfer via optical fibre cables.

Current generation via quantum proton transfer
NIMS and Hokkaido University jointly discovered that proton transfer in electrochemical reactions is governed by the quantum tunneling effect (QTE) under the specific conditions.

A new way to transfer energy between cells
Researchers have described a new method for the transmission of electrons between proteins that refutes the evidence from experiments until now.

Read More: Heat Transfer News and Heat Transfer Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to