Spectral cloaking could make objects invisible under realistic conditions

June 28, 2018

WASHINGTON -- Researchers and engineers have long sought ways to conceal objects by manipulating how light interacts with them. A new study offers the first demonstration of invisibility cloaking based on the manipulation of the frequency (color) of light waves as they pass through an object, a fundamentally new approach that overcomes critical shortcomings of existing cloaking technologies.

The approach could be applicable to securing data transmitted over fiber optic lines and also help improve technologies for sensing, telecommunications and information processing, researchers say. The concept, theoretically, could be extended to make 3D objects invisible from all directions; a significant step in the development of practical invisibility cloaking technologies.

Most current cloaking devices can fully conceal the object of interest only when the object is illuminated with just one color of light. However, sunlight and most other light sources are broadband, meaning that they contain many colors. The new device, called a spectral invisibility cloak, is designed to completely hide arbitrary objects under broadband illumination.

The spectral cloak operates by selectively transferring energy from certain colors of the light wave to other colors. After the wave has passed through the object, the device restores the light to its original state. Researchers demonstrate the new approach in Optica, The Optical Society's journal for high impact research.

"Our work represents a breakthrough in the quest for invisibility cloaking," said José Azaña, National Institute of Scientific Research (INRS), Montréal, Canada. "We have made a target object fully invisible to observation under realistic broadband illumination by propagating the illumination wave through the object with no detectable distortion, exactly as if the object and cloak were not present."

Overcoming previous hurdles

When viewing an object, what you are really seeing is the way in which the object modifies the energy of the light waves that interact with it. Most solutions for invisibility cloaking involve altering the paths that light follows so that waves propagate around, rather than through, an object. Other approaches, called "temporal cloaking," tamper with the propagation speed of the light such that the object is temporarily concealed as it passes through the light beam during a prescribed length of time.

In either approach, different colors of an incoming light wave must follow different paths as they travel through the cloaking device, thus taking different amounts of time to reach their destination. This alteration of the wave's temporal profile can make it apparent to observers that something is not as it should be.

"Conventional cloaking solutions rely on altering the propagation path of the illumination around the object to be concealed; this way, different colors take different amounts of time to traverse the cloak, resulting in easily detectable distortion that gives away the presence of the cloak," said Luis Romero Cortés, National Institute of Scientific Research (INRS). "Our proposed solution avoids this problem by allowing the wave to propagate through the target object, rather than around it, while still avoiding any interaction between the wave and the object."

Rearranging colors

Azaña and his team accomplished this by developing a method to rearrange different colors of broadband light so that the light wave propagates through the object without actually "seeing" it. To do this, the cloaking device first shifts the colors toward regions of the spectrum that will not be affected by propagation through the object. For example, if the object reflects green light, then light in the green portion of the spectrum might be shifted to blue so that there would be no green light for it to reflect. Then, once the wave has cleared the object, the cloaking device reverses the shift, reconstructing the wave in its original state.

The team demonstrated their approach by concealing an optical filter, which is a device that absorbs light in a prescribed set of colors while allowing other colors of light to pass through, that they illuminated with a short pulse of laser light.

The cloaking device was constructed from two pairs of two commercially available electro-optical components. The first component is a dispersive optical fiber, which forces the different colors of a broadband wave to travel at different speeds. The second is a temporal phase modulator, which modifies the optical frequency of light depending on when the wave passes through the device. One pair of these components was placed in front of the optical filter while the other pair was placed behind it.

The experiment confirmed that the device was able to transform the light waves in the range of frequencies that would have been absorbed by the optical filter, then completely reverse the process as the light wave exited the filter on the other side, making it look as though the laser pulse had propagated through a non-absorbing medium.

Putting cloaking to use

While the new design would need further development before it could be translated into a Harry Potter-style, wearable invisibility cloak, the demonstrated spectral cloaking device could be useful for a range of security goals. For example, current telecommunication systems use broadband waves as data signals to transfer and process information. Spectral cloaking could be used to selectively determine which operations are applied to a light wave and which are "made invisible" to it over certain periods of time. This could prevent an eavesdropper from gathering information by probing a fiber optic network with broadband light.

The overall concept of reversible, user-defined spectral energy redistribution could also find applications beyond invisibility cloaking. For example, selectively removing and subsequently reinstating colors in the broadband waves that are used as telecommunication data signals could allow more data to be transmitted over a given link, helping to alleviate logjams as data demands continue to grow. Or, the technique could be used to minimize some key problems in today's broadband telecommunication links, for example by reorganizing the signal energy spectrum to make it less vulnerable to dispersion, nonlinear phenomena and other undesired effects that impair data signals.

While the researchers demonstrated spectral cloaking when the object was illuminated from only one spatial direction, Azaña said it should be possible to extend the concept to make an object invisible under illumination from every direction. The team plans to continue their research toward this goal. In the meantime, the team is also working to advance practical applications for single-direction spectral cloaking in one-dimensional wave systems, such as for fiber optics based applications.
-end-
Paper: L. Romero Cortés, M. Seghilani, R. Maram, J. Azaña, "Full-field broadband invisibility through reversible wave frequency-spectrum control," Optica, 5, 779-786 (2018).
DOI: https://doi.org/10.1364/OPTICA.5.000779

About Optica

Optica is an open-access, online-only journal dedicated to the rapid dissemination of high-impact peer-reviewed research across the entire spectrum of optics and photonics. Published monthly by The Optical Society (OSA), Optica provides a forum for pioneering research to be swiftly accessed by the international community, whether that research is theoretical or experimental, fundamental or applied. Optica maintains a distinguished editorial board of more than 50 associate editors from around the world and is overseen by Editor-in-Chief Alex Gaeta, Columbia University, USA. For more information, visit Optica.

About The Optical Society

Founded in 1916, The Optical Society (OSA) is the leading professional organization for scientists, engineers, students and business leaders who fuel discoveries, shape real-life applications and accelerate achievements in the science of light. Through world-renowned publications, meetings and membership initiatives, OSA provides quality research, inspired interactions and dedicated resources for its extensive global network of optics and photonics experts. For more information, visit osa.org.

Media Contacts:

Rebecca B. Andersen
The Optical Society
randersen@osa.org
+1 202.416.1443

Azalea Coste
The Optical Society
acoste@osa.org
+1 202.416.1435

The Optical Society

Related Scientific Research Articles from Brightsurf:

Who's Tweeting about scientific research? And why?
Although Twitter is best known for its role in political and cultural discourse, it has also become an increasingly vital tool for scientific communication.

Weaving Indigenous knowledge with scientific research: a balanced approach
Insights from bicultural research can enhance practical applications from a palaeotsunami database to land-use decisions, according to a new review in Earth Surface Dynamics

Level of media coverage for scientific research linked to number of citations
An analysis of over 800 academic research papers on physical health and exercise suggests that the level of popular media coverage for a given paper is strongly linked to the attention it receives within the scientific community.

Spotting cutting-edge topics in scientific research using keyword analysis
Researchers from the University of Tsukuba conducted a quantitative keyword analysis of 30 million articles in the life sciences over a nearly fifty-year period (1970-2017) and found that 75% of total emerging keywords, at 1-year prior to becoming identified as emerging, co-appeared with other emerging keywords in the same article.

Calibration method improves scientific research performed with smartphone cameras
Although smartphones and other consumer cameras are increasingly used for scientific applications, it's difficult to compare and combine data from different devices.

AccessLab: New workshops to broaden access to scientific research
A team from the transdisciplinary laboratory FoAM Kernow and the British Science Association detail how to run an innovative approach to understanding evidence called AccessLab in a paper published on May 28 in the open-access journal PLOS Biology.

University of Idaho study finds scientific reproducibility does not equate to scientific truth
Reproducible scientific results are not always true and true scientific results are not always reproducible, according to a mathematical model produced by University of Idaho researchers.

Scientific research will help to understand the origin of life in the universe
Scientists from Samara University and several universities in the USA have proposed and experimentally confirmed new fundamental chemical mechanisms for the synthesis of polycyclic aromatic hydrocarbons (PAHs).

New research helps to inform the design of scientific advisory committees
At a time of 'fake news' and a growing mistrust of scientific experts, researchers at York University's Global Strategy Lab have produced new research to help inform the design of scientific advisory committees and help maximize the application of high-quality scientific research towards future policy and program decisions.

Jumping to scientific conclusions challenges biomedical research
Improving experimental design and statistical analyses alone will not solve the reproducibility crisis in science, argues Ray Dingledine in a societal impact article published in eNeuro.

Read More: Scientific Research News and Scientific Research Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.