Desktop biofactories? New microrobots might manipulate single cells, Science authors report

June 29, 2000

Tiny, submersible robots may suggest a single-cell retrieval system, desktop biofactories, or even tools for minimally invasive surgery, according to a 30 June report in the international journal, Science.

At 670 micrometers tall and 170 to 240 micrometers wide, the new microrobots are shorter than this hyphen--and no wider than the following period. Unlike many previous designs, the Swedish-made microrobots can function in salty broths, blood, urine, cell-culture medium and other liquids, suggesting a host of biotechnology uses.

"Being able to manipulate many individual cells at the same time is becoming increasingly important for genomics, proteomics, and metabolic research," says Edwin W.H. Jager, a graduate student at Sweden's Linköpings Universitet and lead author of the Science paper. "We think that these microrobots would be helpful for fundamental studies, or for manufacturing other small devices, especially if we set up arrays of them."

The robot's miniature hand might someday pluck single cells, bacteria, multi-cellular organisms and other biological entities from a sample, then transfer them to an analysis station. Coupled with a multisensor area, the microrobots also may suggest lab-on-a-chip designs, or "factory-on-a-desk" tools, programmed to assemble various microstructures, say coauthors Olle Inganäs and Ingemar Lundström, faculty members at Linköpings Universitet. Positioned at the end of a catheter, the polymer-and-gold microrobots might increase the range of surgeons, too.

How do the microrobots work? Imagine a human hand, opening and closing. Similarly, conducting polymers such as polypyrrole can be forced to shrink and swell on command. The researchers combine layers of gold and polypyrrole, then use electricity to manipulate contractions of the polymer.

To make the microrobot grab a glass bead, for instance, researchers plump up the polymer by drawing positively charged ions, called cations, away from an electrolyte solution and into the material. Shrinking the polymer is as easy as applying a positive charge to the gold, which oxidizes the polypyrrole and causes cations to flee.

Previous microrobots have included electronic devices featuring rods and levers, artificial flying insects made of polysilicon, and a walking silicon microrobot. But, "none of these operate in water, and would not be suitable as microactuators for the manipulation of cells," Jager notes. Whenever pure silicon is exposed, he explains, it oxidizes and stops working. In the new design, silicon provides a skeletal framework, which is encased and protected by gold and polypyrrole "micromuscles."

The Swedish team's invention was etched into part of a four-inch silicon wafer, which allowed them to create separate gold-and-polypyrrole electrodes for each joint in a robotic arm. From one-fourth of a single wafer, they created 140 microrobots with an elbow, a wrist, a hand, and two to four fingers.

The team used photolithography to pattern the titanium-coated silicon. Next, using a patterned chromium layer as a kind of glue, they added a thin layer of gold to the template. More etching defined individual electrodes on the silicon. This step was followed by a rigid material called BCB (Benzocyclobutene, or Cyclotene), which provided a framework for the electrodes. Finally, the polypyrrole was deposited over the gold. After a final etching step, the robots were released and ready for action.

Submerged in an electrolyte solution, several robots were wired to an electrical source and videotaped as they as hoisted a glass bead. Much like puppeteers pulling one string or another, the researchers stimulated the microrobots' fingers, wrists and elbows by applying a charge to specific joints. To open and close the microrobots' hand, for example, they successively applied positive and negative potentials.

The microrobots successfully moved a bead up to 250 micrometers. They also hoisted beads 270 micrometers, from one miniature conveyor belt or "track" to another, proving their potential as tiny factory workers. Treated with adhesion molecules, the robot's fingers might select particular cells or bacteria from a sample, or they might support surgical procedures. In addition, the Science authors say, an array of microrobots could simultaneously handle many cells.
Research described in the Science paper was supported by the Swedish Foundation for Strategic Research and the Swedish Research Council for Engineering Sciences.


American Association for the Advancement of Science

Related Robots Articles from Brightsurf:

On the way to lifelike robots
In order for robots to be able to achieve more than simple automated machines in the future, they must not only have their own ''brain''.

Children think robots can help the elderly -- but not their own grandparents
A study that asked children to assess three different robots showed that they responded most positively to simple robots shaped like flower pots, and were most sceptical of Pepper the robot, which looks more human.

Nanomaterial gives robots chameleon skin
A new film made of gold nanoparticles changes color in response to any type of movement.

How many jobs do robots really replace?
MIT economist Daron Acemoglu's new research puts a number on the job costs of automation.

Robots popular with older adults
A new study by psychologists from the University of Jena (Germany) does not confirm that robot skepticism among elder people is often suspected in science.

Showing robots how to do your chores
By observing humans, robots learn to perform complex tasks, such as setting a table.

Designing better nursing care with robots
Robots are becoming an increasingly important part of human care, according to researchers based in Japan.

Darn you, R2! When can we blame robots?
A recent study finds that people are likely to blame robots for workplace accidents, but only if they believe the robots are autonomous.

Robots need a new philosophy to get a grip
Robots need to know the reason why they are doing a job if they are to effectively and safely work alongside people in the near future.

How can robots land like birds?
Birds can perch on a wide variety of surfaces, thick or thin, rough or slick.

Read More: Robots News and Robots Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to