Nav: Home

Molecular electronics scientists shatter 'impossible' record

July 03, 2017

An international research team that includes University of Central Florida Professor Enrique del Barco, Damien Thompson of the University of Limerick and Christian A. Nijhuis of the National University of Singapore has cracked an important limitation that for nearly 20 years has prevented the practical use of molecular diodes.

Electrical circuits are the basic building blocks of modern electronics, with components that control the flow of current. One of those components is the diode, which allows the flow of current in a one direction while blocking the opposite flow.

The circuits that are ubiquitous in electronic devices the world over are silicon-based. But scientists have long been trying to duplicate the capabilities of silicon-based circuitry at the molecular level. Molecular electronics use single molecules or nanoscale collections of single molecules as electronic components. That would allow the unprecedented miniaturization of computers and other electronics.

Diodes are characterized by their rectification ratio, which is the rate between current for positive and negative electrical bias. The rectification ratios of commercial silicon-based diodes have rectification ratios between 10^5 and 10^8.

The higher the rectification rate, the more precise the control of current. So, for nearly 20 years without success, researchers have been trying to design molecular diodes that match or exceed that rectification ratio. A fundamental theoretical limitation of a single molecule had limited molecular diodes to rectification ratios no higher than 10^3 -- far from the commercial values of silicon-based diodes.

Now, as reported Monday in the scholarly journal Nature Nanotechnology, a team of scientists led by Nijhuis has demonstrated a way to reach a rectification ratio that had been thought a theoretical impossibility.

The researchers were able to form macroscale tunnel junctions based on a single layer of molecular diodes. The number of molecules conducting current in those junctions changes with the bias polarity, thus multiplying the intrinsic rectification ratio of an individual molecule for forward bias by three orders of magnitude. Their method overcame the 10^3 limitation, resulting in a record-high rectification ratio of 6.3 x 10^5.

"It surpassed that limit imposed by theory. Definitively, you now have a molecular diode that responds comparably to silicon-based diodes," said del Barco, a physicist who interpreted the data and performed the theoretical modeling that explained how it works. "It moves something that was only science into a commercial possibility."

The breakthrough isn't likely to replace silicon diodes, but could eventually bring about the use of molecular diodes for applications that silicon diodes can't handle. And molecular diodes, which can be produced in a chemistry lab, would be cheaper and easier to fabricate than standard diodes.
In addition to del Barco, Thompson and Nijhuis, the research team included Xiaoping Chen, Max Roemer, Li Yuan, and Wei Du, all of the National University of Singapore.

The research was funded through support from Singapore's Ministry of Education, Science Foundation Ireland and the National Science Foundation.

University of Central Florida

Related Electronics Articles:

Artificial materials for more efficient electronics
The discovery by a team of the University of Geneva of an unprecedented physical effect in a new artificial material marks a significant milestone in the lengthy process of developing ''made-to-order'' materials and more energy-efficient electronics.
The new tattoo: Drawing electronics on skin
One day, people could monitor their own health conditions by simply picking up a pencil and drawing a bioelectronic device on their skin.
Lighting the way to porous electronics and sensors
Researchers from Osaka University have created porous titanium dioxide ceramic thin films, at high temperatures and room temperature.
The ink of the future in printed electronics
A research group led by Simone Fabiano at the Laboratory of Organic Electronics, Linköping University, has created an organic material with superb conductivity that doesn't need to be doped.
Integrating electronics onto physical prototypes
MIT researchers have invented a way to integrate 'breadboards' -- flat platforms widely used for electronics prototyping -- directly onto physical products.
Something from nothing: Using waste heat to power electronics
Researchers from the University of Tsukuba developed an improved thermocell design to convert heat into electricity.
Electronics at the speed of light
A European team of researchers including physicists from the University of Konstanz has found a way of transporting electrons at times below the femtosecond range by manipulating them with light.
Electronics integrated to the muscle via 'Kirigami'
A research team in the Department of Electrical and Electronic Information Engineering and the Electronics-Inspired Interdisciplinary Research Institute (EIIRIS) at Toyohashi University of Technology has developed a donut-shaped kirigami device for electromyography (EMG) recordings.
Creating 2D heterostructures for future electronics
New research integrates nanomaterials into heterostructures, an important step toward creating nanoelectronics.
Researchers report a new way to produce curvy electronics
Contact lenses that can monitor your health as well as correct your eyesight aren't science fiction, but an efficient manufacturing method has remained elusive.
More Electronics News and Electronics Current Events

Trending Science News

Current Coronavirus (COVID-19) News

Top Science Podcasts

We have hand picked the top science podcasts of 2020.
Now Playing: TED Radio Hour

Listen Again: The Power Of Spaces
How do spaces shape the human experience? In what ways do our rooms, homes, and buildings give us meaning and purpose? This hour, TED speakers explore the power of the spaces we make and inhabit. Guests include architect Michael Murphy, musician David Byrne, artist Es Devlin, and architect Siamak Hariri.
Now Playing: Science for the People

#576 Science Communication in Creative Places
When you think of science communication, you might think of TED talks or museum talks or video talks, or... people giving lectures. It's a lot of people talking. But there's more to sci comm than that. This week host Bethany Brookshire talks to three people who have looked at science communication in places you might not expect it. We'll speak with Mauna Dasari, a graduate student at Notre Dame, about making mammals into a March Madness match. We'll talk with Sarah Garner, director of the Pathologists Assistant Program at Tulane University School of Medicine, who takes pathology instruction out of...
Now Playing: Radiolab

What If?
There's plenty of speculation about what Donald Trump might do in the wake of the election. Would he dispute the results if he loses? Would he simply refuse to leave office, or even try to use the military to maintain control? Last summer, Rosa Brooks got together a team of experts and political operatives from both sides of the aisle to ask a slightly different question. Rather than arguing about whether he'd do those things, they dug into what exactly would happen if he did. Part war game part choose your own adventure, Rosa's Transition Integrity Project doesn't give us any predictions, and it isn't a referendum on Trump. Instead, it's a deeply illuminating stress test on our laws, our institutions, and on the commitment to democracy written into the constitution. This episode was reported by Bethel Habte, with help from Tracie Hunte, and produced by Bethel Habte. Jeremy Bloom provided original music. Support Radiolab by becoming a member today at     You can read The Transition Integrity Project's report here.