NRC scientists grow organic wires for nanoscale devices

July 06, 2000

NRC scientists grow organic wires for nanoscale devices By prompting organic molecules to spontaneously line up along natural pathways on a silicon crystal, scientists at the National Research Council of Canada (NRC) have taken a key step toward the next revolution in microchip technology: the fabrication of tiny devices that sense, analyze, and respond to information in their environment.

"We are approaching the limits of standard microchip technology. In the push to break through that barrier and develop yet more powerful devices, scientists around the world are racing to develop nanoscale structures," says Bob Wolkow of NRC's Steacie Institute of Molecular Sciences (SIMS). "We are talking about devices on a scale about one thousand times smaller than a single bacterium. To get there, we need to find completely new ways to make things and to make them work."

Nanotechnology received a tremendous boost in 1990 when researchers at IBM labs demonstrated that individual atoms could be placed on a surface using a scanning tunneling microscope (STM). While advances have been made on many fronts, several obstacles remain. Atom-by-atom crafting of structures with STM is too slow for any practical fabrication process and standard lithography techniques are too coarse for devices of this size. In addition, without some sort of nanoscale wiring system, the functional capacity of these nanoscale units simply can not be harnessed.

Wolkow, together with colleagues Danial Wayner and Gregory Lopinski have found a way to address these obstacles and to enhance semiconductor technology by adding the capabilities of organic matter to the realm of silicon devices. The SIMS team started with a silicon surface rendered unreactive by a coating of hydrogen atoms. Then, using STM, they plucked off one hydrogen atom, leaving a single, atom-sized reactive spot. Once that dangling bond had been created, they exposed the entire crystal to a gas of styrene molecules.

"The dangling bond is highly reactive, so it quickly grabbed a styrene molecule," says Wolkow. "That made the silicon happy, but left the molecule unstable. So, the styrene's natural reaction was to steal an adjacent hydrogen atom from the silicon surface. That created another reactive site and set off a chain reaction that resulted in the growth of a molecular line."

In effect, the SIMS team has found a way to use STM to initiate a self-assembling nanoscale wiring system. Their calculations show electronic coupling between adjacent molecules, which suggests some molecular lines could be capable of transmitting signals down the pathway. Alternately, the lines could serve as templates to direct the growth of very small conductors applied with conventional lithographic methods.

The SIMS self-assembly method has two significant advantages over previous STM schemes for nanostructure fabrication in that it addresses problems of defect intolerance and mass production. Because they are so small, molecular devices will allow little or no margin for error. The SIMS method will make it possible to build in a degree of redundancy that ensures at least one transmission line will get the message from point A to point B. Equally important, because STM is used only to initiate the process, this method offers the first practical step toward mass production of molecular devices.

"Right now, it takes literally days to individually place atoms on a crystal using STM," says Wolkow. "With this method, you could use STM to prepare a batch of devices. Once exposed to the desired molecule, multiple lines would grow simultaneously. You could grow a virtually unlimited array of identical structures, all in a matter of seconds."

On another level, the SIMS work enables further exploration of the development of hybrid devices. Incorporating organic molecules is one way to expand the palette of materials available to semiconductor device designers, and could lead to completely new capabilities. Silicon technology is limited to electrical signal processing, but organic molecules have the capacity to sense changes in their environments and react to those changes. If science finds a way to marry these abilities-and to do it on the atomic scale-it may become possible to custom-make tiny devices that perform very specific functions.

"This discovery is an excellent example of the power of multidisciplinary research being conducted at the NRC," says NRC President Dr. Arthur Carty. "By combining their knowledge of physics and chemistry, the SIMS team has opened the door to new technologies with enormous potential in many fields-from communications to medicine. Their achievement also demonstrates how important it is for NRC to support fundamental research in Canada."

Prompted by the realization that the field had reached a major roadblock, Wolkow and Wayner first began work on this concept approximately four years ago. While much work remains to be done, they are optimistic about the prospects of nanotechnology and the potential of hybrid devices. The SIMS team believes their technique for self-directed growth of molecular lines will spur advances on a number of fronts.

"The appeal of the technique is that we've limited the need for arduous atom-by-atom crafting of structures with an STM, and unleashed a spontaneous process to automatically drive nanostructure growth," says Wolkow. "On top of that, we've opened the door to further exploration of the possibilities inherent in marrying the power of electronics with the sensitivity of organic molecules."
-end-
The work of the SIMS team appears in the July 6 edition of Nature, in a paper entitled "Self-directed Growth of Molecular Nano-Structures onSilicon" as well as in the News and Views section. An animation of the molecular bonding sequence can be viewed by visiting: ftp://gold.sao.nrc.ca/pub/sims/mi/styreneline.mpg.

For more information, please contact:

Dr. Robert A. Wolkow
Senior Research Officer
National Research Council
bob.wolkow@nrc.ca
Tel: 613-998-5859

National Research Council of Canada

Related Organic Molecules Articles from Brightsurf:

Metal-organic frameworks become flexible
Materials consisting of inorganic and organic components can combine the best of two worlds: under certain circumstances, the so-called MOFs - short for metal-organic frameworks - are structured in the same order as crystals and are at the same time porous and deformable.

Printing organic transistors
Researchers successfully print and demonstrate organic transistors, electronic switches, which can operate close to their theoretical speed limits.

Energy harvesting goes organic, gets more flexible
The race is on to create natural biocompatible piezoelectric materials for energy harvesting, electronic sensing, and stimulating nerves.

A new kind of liquid scintillator via hybridizing perovskite nanocrystals with organic molecules
Highly-efficient scintillators are playing an essential role in various fundamental science and industrial applications.

Study pinpoints process that might have led to first organic molecules
New research led by the American Museum of Natural History and funded by NASA identifies a process that might have been key in producing the first organic molecules on Earth about 4 billion years ago, before the origin of life.

Tracing the cosmic origin of complex organic molecules with their radiofrequency footprint
How did organic matter reach the Earth in the first place?

4-billion-year-old nitrogen-containing organic molecules discovered in Martian meteorites
Scientists exploring Mars and analysing Martian meteorite samples have found organic compounds essential for life: nitrogen-bearing organics in a 4-billion-year-old Martian meteorite.

Study: Organic molecules discovered by Curiosity Rover consistent with early life on Mars
Organic compounds called thiophenes are found on Earth in coal, crude oil and oddly enough, in white truffles, the mushroom beloved by epicureans and wild pigs.

Let there be light: Synthesizing organic compounds
The appeal of developing improved drugs to promote helpful reactions or prevent harmful ones has driven organic chemists to better understand how to synthetically create these molecules and reactions in the laboratory.

Metal-organic framework nanoribbons
The nanostructure of metal-organic frameworks (MOFs) plays an important role in various applications since different nanostructures usually exhibit different properties and functions.

Read More: Organic Molecules News and Organic Molecules Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.