Weyl fermions discovered in another class of materials

July 12, 2019

A particular kind of elementary particle, the Weyl fermions, were first discovered a few years ago. Their specialty: they move through a material in a well ordered manner that practically never lets them collide with each other and is thus very energy efficient. This opens up intriguing possibilities for the electronics of the future. Up to now, Weyl fermions had only been found in certain non-magnetic materials. Now however, for the very first time, scientists at the Paul Scherrer Institute PSI have experimentally proved their existence in another type of material: a paramagnet with intrinsic slow magnetic fluctuations. This finding also shows that it is possible to manipulate the Weyl fermions with small magnetic fields, potentially enabling their use in spintronics, a promising development in electronics for novel computer technology. The researchers now published their findings in the scientific journal Science Advances.

Amongst the approaches that could pave the way to energy efficient electronics of the future, Weyl fermions could play an intriguing role. Found experimentally only inside materials as so-called quasi-particles, they behave like particles which have no mass. Predicted theoretically already in 1929 by the mathematician Hermann Weyl, their experimental discovery by scientists amongst other at PSI only came in 2015. So far, Weyl fermions had only been observed in certain non-magnetic materials. Now however, a team of scientists at PSI together with researchers in the USA, China, Germany and Austria also found them in a specific paramagnetic material. This discovery could bring a potential usage of Weyl fermions in future computer technology one step closer.

Searching for slow magnetic fluctuations

"The difficult part," says Junzhang Ma, postdoctoral researcher at PSI and first author of the new study, "was to identify a suitable magnetic material in which to look for these Weyl fermions." For years, although the accepted theoretical assumption had been that in certain magnetic materials Weyl fermions could exist by themselves, experimental proof of this was still missing despite considerable effort from several research groups worldwide. The team of scientists at PSI then had the idea to turn their attention to a specific group of magnetic materials: paramagnets with slow magnetic fluctuations.

"In specific paramagnetic materials, these intrinsic magnetic fluctuations could suffice to create a pair of Weyl fermions," says Ming Shi, who is a professor in the same research group as Ma: the Spectroscopy of Novel Materials Group. "But we understood that the fluctuations had to be slow enough in order for the Weyl fermions to appear. From this point on, identifying which material could have sufficiently slow magnetic fluctuations became our primary challenge."

Since the characteristic time of the magnetic fluctuations is not a feature that can be checked in a work of reference for every material, it took the researchers some time and effort to find a suitable material for their experiment. Model analysis in theoretical physics also done at PSI helped them in identifying a promising candidate with slow magnetic fluctuations: the material with the chemical notation EuCd2As2: Europium-Cadmium-Arsenic. And indeed, in this paramagnetic material, the scientists were able to experimentally prove Weyl fermions.

Measurements with Muons and X-rays

The scientists used two of PSIs large research facilities for their experiments: First, they employed the Swiss Muon Source SμS to measure and better characterise the magnetic fluctuations of their material. Subsequently, they visualized the Weyl fermions with an x-ray spectroscopy method at the Swiss Light Source SLS.

"What we have proven here is that Weyl fermions can exist in a wider range of materials than previously thought", says Junzhang Ma. The scientists' research thus significantly broadens the range of materials considered viable in the search for materials suitable for the electronics of the future. Within an area of development called spintronics, Weyl fermions could be used to transport information with much higher efficiency than that achieved by electrons in today's technology.
Text: Paul Scherrer Institute/Laura Hennemann

Images are available for download at https://www.psi.ch/en/node/29465?access-token=9atQMPm6kZ3mwZTY.

Additional information

New particle could form the basis of energy-saving electronics - Media release of 17 March 2016: http://psi.ch/2KSS

Electron's cousin discovered after eighty-six-year search - Media release of 12 November 2015: http://psi.ch/z9CQ

About PSI

The Paul Scherrer Institute PSI develops, builds and operates large, complex research facilities and makes them available to the national and international research community. The institute's own key research priorities are in the fields of matter and materials, energy and environment and human health. PSI is committed to the training of future generations. Therefore about one quarter of our staff are post-docs, post-graduates or apprentices. Altogether PSI employs 2100 people, thus being the largest research institute in Switzerland. The annual budget amounts to approximately CHF 407 million. PSI is part of the ETH Domain, with the other members being the two Swiss Federal Institutes of Technology, ETH Zurich and EPFL Lausanne, as well as Eawag (Swiss Federal Institute of Aquatic Science and Technology), Empa (Swiss Federal Laboratories for Materials Science and Technology) and WSL (Swiss Federal Institute for Forest, Snow and Landscape Research).


Prof. Dr Ming Shi,
Spectroscopy of Novel Materials Group
Paul Scherrer Institute Forschungsstrasse 111, 5232 Villigen PSI, Switzerland
Telephone: +41 56 310 23 93
E-mail: ming.shi@psi.ch [English, Chinese]

Original Publication
Spin fluctuation induced Weyl semimetal state in the paramagnetic phase of EuCd2As2 J.-Z. Ma, S. M. Nie, C. J. Yi, J. Jandke, T. Shang, M. Y. Yao, M. Naamneh, L. Q. Yan, Y. Sun, A. Chikina, V. N. Strocov, M. Medarde, M. Song, Y.-M. Xiong, G. Xu, W. Wulfhekel, J. Mesot, M. Reticcioli, C. Franchini, C. Mudry, M. Müller, Y. G. Shi, T. Qian, H. Ding, M. Shi Science Advances 12 July 2019 (online) DOI: 10.1126/sciadv.aaw4718

Paul Scherrer Institute

Related Electronics Articles from Brightsurf:

Artificial materials for more efficient electronics
The discovery by a team of the University of Geneva of an unprecedented physical effect in a new artificial material marks a significant milestone in the lengthy process of developing ''made-to-order'' materials and more energy-efficient electronics.

The new tattoo: Drawing electronics on skin
One day, people could monitor their own health conditions by simply picking up a pencil and drawing a bioelectronic device on their skin.

Lighting the way to porous electronics and sensors
Researchers from Osaka University have created porous titanium dioxide ceramic thin films, at high temperatures and room temperature.

The ink of the future in printed electronics
A research group led by Simone Fabiano at the Laboratory of Organic Electronics, Linköping University, has created an organic material with superb conductivity that doesn't need to be doped.

Integrating electronics onto physical prototypes
MIT researchers have invented a way to integrate 'breadboards' -- flat platforms widely used for electronics prototyping -- directly onto physical products.

Something from nothing: Using waste heat to power electronics
Researchers from the University of Tsukuba developed an improved thermocell design to convert heat into electricity.

Electronics at the speed of light
A European team of researchers including physicists from the University of Konstanz has found a way of transporting electrons at times below the femtosecond range by manipulating them with light.

Electronics integrated to the muscle via 'Kirigami'
A research team in the Department of Electrical and Electronic Information Engineering and the Electronics-Inspired Interdisciplinary Research Institute (EIIRIS) at Toyohashi University of Technology has developed a donut-shaped kirigami device for electromyography (EMG) recordings.

Creating 2D heterostructures for future electronics
New research integrates nanomaterials into heterostructures, an important step toward creating nanoelectronics.

Researchers report a new way to produce curvy electronics
Contact lenses that can monitor your health as well as correct your eyesight aren't science fiction, but an efficient manufacturing method has remained elusive.

Read More: Electronics News and Electronics Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.