Nav: Home

Two faces offer limitless possibilities

July 19, 2018

Named for the mythical god with two faces, Janus membranes -- double-sided membranes that serve as gatekeepers between two substances -- have emerged as a material with potential industrial uses. Creating two distinct "faces" on these delicate surfaces, however, is a process fraught with challenges.

By applying a common high-tech manufacturing technique in an uncommon way, researchers at the U.S. Department of Energy's (DOE) Argonne National Laboratory have discovered a new way to chemically deposit a second face, resulting in Janus membranes that are more robust and precisely structured than previous incarnations. Recently described in an article in Advanced Materials Interfaces, the patent pending technology could help optimize or enable a wide range of industrial processes, from treating wastewater to making biofuels.

According to Argonne's Seth Darling, Janus is also the Roman god of passages, making the name even more apt for these membranes that mark the boundary between substances -- conveying gas bubbles into liquids, for example, or separating oil and water. Darling is a scientist in Argonne's Center for Nanoscale Materials (CNM) and director of the laboratory's Institute for Molecular Engineering (IME), the Argonne-based partner to the University of Chicago's Institute for Molecular Engineering, of which he is also a fellow.

According to Darling, the Janus membrane research is part of a broader effort at Argonne to advance a "new water cycle" for society, in which water would be treated and reused as many times as possible before being released back into the environment. There's a whole library of materials that could be used to create new Janus membranes, notes Darling, and each would have different properties and offer potential for myriad new applications.

Typically, Janus membranes are chemically treated on one side of a membrane and not the other, giving it two faces. But the addition of that layer can be difficult to control using current methods, both in terms of the coating's stability and how deeply it penetrates.

Argonne researchers turned to atomic layer deposition (ALD), a technique commonly used in microelectronics and semiconductor fabrication, to improve the process. Using ALD, they deposited a water-attracting layer of aluminum oxide onto a water-repellent polypropylene membrane, creating a stable Janus membrane that could be used, for example, in fine-bubble aeration of water.

ALD typically works to coat an object thoroughly and uniformly, rather than partially, as is the goal with a Janus membrane.

"It was not intuitive that this strategy would work," Darling says. "The trick that we play is using a membrane that has very small pores."

The tiny pores trap the vapors that form the first layer of aluminum oxide before they have a chance to penetrate the membrane completely. By varying the duration and pressure of the aluminum oxide application, the research team was able to produce a strongly bonded coating on one side of the membrane with greater control than is possible using any other technique.

The ability to make Janus membranes with this level of precision and stability could introduce new levels of efficiency in a variety of industrial processes. At wastewater treatment plants, for example, where aeration is used to help break down contaminants, optimizing the bubbling process could reduce energy expenditures. Improved Janus membranes could also accelerate emulsification or demulsification of oil-water mixtures, both important in a wide variety of manufacturing processes. Argonne is investing in development of advanced manufacturing technologies, such as materials with advanced properties and manufacturing processes that are more energy efficient.

The technique emerged from what initially appeared to be an unsuccessful experiment conducted by Ruben Waldman, a graduate student at the University of Chicago's Institute for Molecular Engineering. Darling is advising Waldman on his doctoral degree.

Waldman was investigating how ALD would affect membranes and noticed that the aluminum oxide was not fully coating the membrane's bottom side. After consulting with Hao-Cheng Yang, an expert on Janus membranes and a postdoctoral appointee working with Darling at the CNM, Waldman decided to see whether this one-sided deposition could be optimized to achieve the partial layering needed for Janus membranes.
The Janus membrane research was funded by Argonne's Laboratory Directed Research and Development program and the National Science Foundation, and was made possible through the use of the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, and the Pritzker Nanofabrication Facility of the Institute for Molecular Engineering at the University of Chicago.

Watch the video

Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation's first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America's scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy's Office of Science.

The U.S. Department of Energy's Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit the Office of Science website.

DOE/Argonne National Laboratory

Related Aluminum Articles:

Scientists created nanopowders for the synthesis of new aluminum alloys
The research team of Siberian Federal University together with the scientists of the Krasnoyarsk Scientific Center of the SB RAS has developed a method for the synthesis of aluminum alloys, the use of which will allow the creation of new types of products with improved characteristics based on aluminum.
Scientists created nanopowders for the synthesis of new aluminum alloys
The research team of Siberian Federal University together with the scientists of the Krasnoyarsk Scientific Center of the SB RAS has developed a method for the synthesis of aluminum alloys, the use of which will allow the creation of new types of products with improved characteristics based on aluminum.
Examining exploding stars through the atomic nucleus
Imagine being able to view microscopic aspects of a classical nova, a massive stellar explosion on the surface of a white dwarf star (about as big as Earth), in a laboratory rather than from afar via a telescope.
Ultrathin protective layer brings quite a bit more stability to perovskite solar cell
The addition of a few nanometers of a thin layer of aluminum oxide protects a perovskite solar cell against humidity -- still a major stumbling block to the commercial application of this new type of solar cell.
See-through circuitry
Indium tin oxide, the current material used in transparent electronics, is becoming very expensive thanks to the rarity of indium.
Pitt receives NSF grant to study how aluminum alloy microstructures form in real time
A grant from the National Science Foundation will enable researchers at the University of Pittsburgh to utilize a one-of-a-kind transmission electron microscope developed at Lawrence Livermore National Laboratory to examine in real time how microstructures form in metals and alloys as they solidify after laser beam melting.
Tracking the aluminum used to purify tap water
A Kobe University research group have developed a new analysis method that uses magnetic fields to quickly and accurately measure the concentration of aluminum used to purify tap water.
An attempt to reduce materials cost of autoclaved aerated concrete production
To reduce the materials cost of autoclaved aerated concrete (AAC) production, these two types of solid waste could theoretically be used as the aerating agent and silica source, respectively.
Making some of the world's most durable materials corrosion-resistant
Borides are among the hardest and most heat-resistant substances on the planet, but their Achilles' Heel, like so many materials', is that they oxidize at high temperatures.
Method stabilizes, enhances phosphorene
A Northwestern University research team used organic chemistry to covalently react a single-molecule-thick layer onto phosphorene to stabilize its reactivity to open air.

Related Aluminum Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Changing The World
What does it take to change the world for the better? This hour, TED speakers explore ideas on activism—what motivates it, why it matters, and how each of us can make a difference. Guests include civil rights activist Ruby Sales, labor leader and civil rights activist Dolores Huerta, author Jeremy Heimans, "craftivist" Sarah Corbett, and designer and futurist Angela Oguntala.
Now Playing: Science for the People

#521 The Curious Life of Krill
Krill may be one of the most abundant forms of life on our planet... but it turns out we don't know that much about them. For a create that underpins a massive ocean ecosystem and lives in our oceans in massive numbers, they're surprisingly difficult to study. We sit down and shine some light on these underappreciated crustaceans with Stephen Nicol, Adjunct Professor at the University of Tasmania, Scientific Advisor to the Association of Responsible Krill Harvesting Companies, and author of the book "The Curious Life of Krill: A Conservation Story from the Bottom of the World".