Scientists develop new material for longer-lasting fuel cells

July 22, 2020

New research suggests that graphene - made in a specific way- could be used to make more durable hydrogen fuel cells for cars.

In the study, published today in the journal Nanoscale, scientists produced graphene via a special, scalable technique and used it to develop hydrogen fuel cell catalysts. The research team, involving scientists from Queen Mary University of London and University College London (UCL), showed that this new type of graphene-based catalyst was more durable than commercially available catalysts and matched their performance.

Hydrogen fuel cells convert chemical energy into electrical power by combining hydrogen and oxygen with the aid of catalysts. As the only by-product of the reaction is water, they provide an efficient and environmentally friendly power source.

Platinum is the most widely used catalyst for these fuel cells, but its high cost is a big problem for the commercialisation of hydrogen fuel cells. To address this issue, commercial catalysts are typically made by decorating tiny nanoparticles of platinum onto a cheaper carbon support, however the poor durability of the material greatly reduces the lifetime of current fuel cells.

Previous research has suggested graphene could be an ideal support material for fuel cells due to its corrosion resistance, high surface area and high conductivity. However, the graphene used in the majority of experiments to-date contains many defects, meaning that the predicted improved resistance has not yet been achieved.

The technique described in the study produces high-quality graphene decorated with platinum nanoparticles in a one-pot synthesis. This process could be scaled up for mass production, opening up the use of graphene-based catalysts for widespread energy applications.

Professor Dan Brett, Professor of Electrochemical Engineering at UCL, said: "Satisfying global energy demands without damaging the environment is one of the great modern challenges. Hydrogen fuel cells can provide cleaner energy and are already used in some cars as an alternative to petrol or diesel. However, a big barrier to their widespread commercialisation is the ability for catalysts to withstand extensive cycling required for their use in energy applications. We've shown that by using graphene instead of the typical amorphous carbon as a support material we can create ultra-durable catalysts."

The researchers confirmed the durability of the graphene-based catalyst using a type of test based on those recommended by the US Department of Energy (DoE), known as accelerated stress tests. Accelerated stress tests deliberately stress the catalyst rapidly over many cycles in a short space of time, allowing scientists to assess the stability of new materials without having to use them in an operational fuel cell over a period of months or years.

Using these tests, the scientists showed that loss in activity over the same testing period was around 30 per cent lower in the newly developed graphene-based catalyst, compared with commercial catalysts.

Gyen Ming Angel, PhD student and lead author of the study, from UCL, said: "The DoE sets tests and targets for fuel cell durability, with one accelerated stress test to simulate normal operating conditions and one to simulate the high voltages experienced when starting up and shutting down the fuel cell. Most research studies in the graphene space only evaluate using one of the recommended tests. However, since we have high-quality graphene in our material, we have managed to achieve high durability in both tests and under long testing periods, which is important for the future commercialisation of these materials. We look forward to incorporating our new catalyst into commercial technology and realising the advantages of longer-life fuel cells."

Graphene is made from a single layer of carbon atoms arranged in a hexagonal lattice. Despite its relatively simple structure, graphene is thought to have remarkable properties including high electrical conductivity, high transparency and high flexibility.

Dr. Patrick Cullen, Lecturer in Renewable Energy from Queen Mary University of London, said: "Over the years, there's been a lot of hype around graphene and the vast number of promising applications for this material. However, the research community is still waiting for its full potential to be realised, and this has led to some negativity around this proposed 'wonder material'. This view isn't helped by the fact that many research studies on graphene use defective versions of graphene. We hope that this paper can restore faith in graphene and show that this material holds great potential for improving technology, like fuel cells, now and in the future."
-end-
Notes to editors

* Research publication: 'Realising the electrochemical stability of graphene: scalable synthesis of ultra-durable platinum catalyst for the oxygen reduction reaction' Gyen Ming A. Angel, Noramalina Mansor, Rhodri Jervis, Zahra Rana, Chris Gibbs, Andrew Seel, Alexander F.R. Kilpatrick, Paul R. Shearing, Christopher A. Howard, Dan J. L. Brett and Patrick L. Cullen, Nanoscale.

* For more information or a copy of the paper, please contact:

Sophie McLachlan
Faculty Communications Manager (Science & Engineering)
Queen Mary University of London
sophie.mclachlan@qmul.ac.uk
Tel: 020 7882 3787

About Queen Mary

Queen Mary University of London is a research-intensive university that connects minds worldwide. A member of the prestigious Russell Group, we work across the humanities and social sciences, medicine and dentistry, and science and engineering, with inspirational teaching directly informed by our world-leading research. In the most recent Research Excellence Framework we were ranked 5th in the country for the proportion of research outputs that were world-leading or internationally excellent. We have over 25,000 students and offer more than 240 degree programmes. Our reputation for excellent teaching was rewarded with silver in the most recent Teaching Excellence Framework. Queen Mary has a proud and distinctive history built on four historic institutions stretching back to 1785 and beyond. Common to each of these institutions - the London Hospital Medical College, St Bartholomew's Medical College, Westfield College and Queen Mary College - was the vision to provide hope and opportunity for the less privileged or otherwise under-represented. Today, Queen Mary University of London remains true to that belief in opening the doors of opportunity for anyone with the potential to succeed and helping to build a future we can all be proud of.

UCL - London's Global University

UCL is a diverse community with the freedom to challenge and think differently.

Our community of more than 41,500 students from 150 countries and over 12,500 staff pursues academic excellence, breaks boundaries and makes a positive impact on real world problems.

We are consistently ranked among the top 10 universities in the world and are one of only a handful of institutions rated as having the strongest academic reputation and the broadest research impact.

We have a progressive and integrated approach to our teaching and research - championing innovation, creativity and cross-disciplinary working. We teach our students how to think, not what to think, and see them as partners, collaborators and contributors.

For almost 200 years, we are proud to have opened higher education to students from a wide range of backgrounds and to change the way we create and share knowledge.

We were the first in England to welcome women to university education and that courageous attitude and disruptive spirit is still alive today. We are UCL.

http://www.ucl.ac.uk| Follow @uclnews on Twitter | Watch our YouTube channel | Listen to UCL podcasts on SoundCloud | Find out what's on at UCL Minds | #MadeAtUCL

Queen Mary University of London

Related Graphene Articles from Brightsurf:

How to stack graphene up to four layers
IBS research team reports a novel method to grow multi-layered, single-crystalline graphene with a selected stacking order in a wafer scale.

Graphene-Adsorbate van der Waals bonding memory inspires 'smart' graphene sensors
Electric field modulation of the graphene-adsorbate interaction induces unique van der Waals (vdW) bonding which were previously assumed to be randomized by thermal energy after the electric field is turned off.

Graphene: It is all about the toppings
The way graphene interacts with other materials depends on how these materials are brought into contact with the graphene.

Discovery of graphene switch
Researchers at Japan Advanced Institute of Science and Technology (JAIST) successfully developed the special in-situ transmission electron microscope technique to measure the current-voltage curve of graphene nanoribbon (GNR) with observing the edge structure and found that the electrical conductance of narrow GNRs with a zigzag edge structure abruptly increased above the critical bias voltage, indicating that which they are expected to be applied to switching devices, which are the smallest in the world.

New 'brick' for nanotechnology: Graphene Nanomesh
Researchers at Japan advanced institute of science and technology (JAIST) successfully fabricated suspended graphene nanomesh (GNM) by using the focused helium ion beam technology.

Flatter graphene, faster electrons
Scientists from the Swiss Nanoscience Institute and the Department of Physics at the University of Basel developed a technique to flatten corrugations in graphene layers.

Graphene Flagship publishes handbook of graphene manufacturing
The EU-funded research project Graphene Flagship has published a comprehensive guide explaining how to produce and process graphene and related materials (GRMs).

How to induce magnetism in graphene
Graphene, a two-dimensional structure made of carbon, is a material with excellent mechani-cal, electronic and optical properties.

Graphene: The more you bend it, the softer it gets
New research by engineers at the University of Illinois combines atomic-scale experimentation with computer modeling to determine how much energy it takes to bend multilayer graphene -- a question that has eluded scientists since graphene was first isolated.

How do you know it's perfect graphene?
Scientists at the US Department of Energy's Ames Laboratory have discovered an indicator that reliably demonstrates a sample's high quality, and it was one that was hiding in plain sight for decades.

Read More: Graphene News and Graphene Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.