Nav: Home

Vacancy dynamics on CO-covered Pt(111) electrodes

July 25, 2020

Platinum arguably is the most important electrocatalyst material, not only because it is the best single element catalyst in a variety of important electrocatalytic reactions but also due to its relatively high stability. However, in the corrosive environment of real electrocatalysis systems, such as fuel cells, even platinum can structurally degrade. Moreover, the presence of strongly adsorbing species, in particular carbon monoxide (CO), can substantially increase these degradation effects.

A team led by Prof. CHEN Yanxia from University of Science and Technology of China (USTC) of CAS, in cooperation with Prof. Olaf Magnuseen, reported in situ video-STM observations of additional point defects in the presence of this dynamic CO adlayer. The STM observations presented in this work provide direct insights into their dynamic behavior and formation mechanisms. The research results were published in Chemical Communications on June 17th.

Adsorbed CO is known to interact with Pt electrodes, causing a relaxation of Pt surface atoms and a weakening of the Pt-Pt bond. In situ scanning tunneling microscopy (STM) studies of Pt(111) in the presence of dissolved CO found that initially disordered were transformed into perfectly straight (111) steps by potential cycling into the CO oxidation regime. CO can increase Pt surface mobility during CO oxidation, which can reduce the amount of available low coordinated sites, leading to a restructuring of the Pt steps.

In the previous work by the team, they studied the atomic-scale structural dynamics of

CO adlayers on Pt(111) electrodes in CO-saturated 0.1 M H2SO4 using in situ video-rate scanning tunneling microscopy (STM) and density functional theory (DFT).

In the recent work, their video-STM results of Pt(111) in CO-saturated 0.1 M H2SO4 revealed specific defects within the apparent (1 × 1)-CO adlayer, which we assign to vacancies in the topmost Pt layer. The presence of these Pt vacancies as well as the observed fluctuations at the Pt steps show that even under very benign conditions, i.e., for the particularly stable Pt(111) electrode surface in the CO pre-oxidation regime, the presence of CO can induce some structural degradation.

Thus, CO may affect the stability of Pt electrocatalysts already at potentials as low as 0.30 VAg/AgCl, which for example may be relevant in direct methanol fuel cells. The atomic scale data obtained by video-STM provide fundamental insights into the structure-activity and structure-stability relationships, which may contribute to the knowledge-based design of better Pt electrocatalysts.

In addition, their results show that for suitable systems the dynamics of individual electrode point defects, such as vacancies, can be directly investigated in electrochemical environment.

The observed dynamic behavior suggests a complex interaction between adsorbed CO and surface vacancies which also should affect the electrochemical reactivity of CO and needs to be explored in future experimental and theoretical studies.

University of Science and Technology of China

Related Fuel Cells Articles:

Fuel cells for hydrogen vehicles are becoming longer lasting
An international research team led by the University of Bern has succeeded in developing an electrocatalyst for hydrogen fuel cells which, in contrast to the catalysts commonly used today, does not require a carbon carrier and is therefore much more stable.
Scientists develop new material for longer-lasting fuel cells
New research suggests that graphene -- made in a specific way -- could be used to make more durable hydrogen fuel cells for cars
AI could help improve performance of lithium-ion batteries and fuel cells
Imperial College London researchers have demonstrated how machine learning could help design lithium-ion batteries and fuel cells with better performance.
Engineers develop new fuel cells with twice the operating voltage as hydrogen
Engineers at the McKelvey School of Engineering at Washington University in St.
Iodide salts stabilise biocatalysts for fuel cells
Contrary to theoretical predictions, oxygen inactivates biocatalysts for energy conversion within a short time, even under a protective film.
Instant hydrogen production for powering fuel cells
Researchers from the Chinese Academy of Sciences, Beijing and Tsinghua University, Beijing investigate real-time, on-demand hydrogen generation for use in fuel cells, which are a quiet and clean form of energy.
Ammonia for fuel cells
Researchers at the University of Delaware have identified ammonia as a source for engineering fuel cells that can provide a cheap and powerful source for fueling cars, trucks and buses with a reduced carbon footprint.
Microorganisms build the best fuel efficient hydrogen cells
With billions of years of practice, nature has created the most energy efficient machines.
Atomically precise models improve understanding of fuel cells
Simulations from researchers in Japan provide new insights into the reactions occurring in solid-oxide fuel cells by using realistic atomic-scale models of the electrode active site based on microscope observations instead of the simplified and idealized atomic structures employed in previous studies.
New core-shell catalyst for ethanol fuel cells
Scientists at Brookhaven Lab and the University of Arkansas have developed a highly efficient catalyst for extracting electrical energy from ethanol, an easy-to-store liquid fuel that can be generated from renewable resources.
More Fuel Cells News and Fuel Cells Current Events

Trending Science News

Current Coronavirus (COVID-19) News

Top Science Podcasts

We have hand picked the top science podcasts of 2020.
Now Playing: TED Radio Hour

Listen Again: The Power Of Spaces
How do spaces shape the human experience? In what ways do our rooms, homes, and buildings give us meaning and purpose? This hour, TED speakers explore the power of the spaces we make and inhabit. Guests include architect Michael Murphy, musician David Byrne, artist Es Devlin, and architect Siamak Hariri.
Now Playing: Science for the People

#576 Science Communication in Creative Places
When you think of science communication, you might think of TED talks or museum talks or video talks, or... people giving lectures. It's a lot of people talking. But there's more to sci comm than that. This week host Bethany Brookshire talks to three people who have looked at science communication in places you might not expect it. We'll speak with Mauna Dasari, a graduate student at Notre Dame, about making mammals into a March Madness match. We'll talk with Sarah Garner, director of the Pathologists Assistant Program at Tulane University School of Medicine, who takes pathology instruction out of...
Now Playing: Radiolab

What If?
There's plenty of speculation about what Donald Trump might do in the wake of the election. Would he dispute the results if he loses? Would he simply refuse to leave office, or even try to use the military to maintain control? Last summer, Rosa Brooks got together a team of experts and political operatives from both sides of the aisle to ask a slightly different question. Rather than arguing about whether he'd do those things, they dug into what exactly would happen if he did. Part war game part choose your own adventure, Rosa's Transition Integrity Project doesn't give us any predictions, and it isn't a referendum on Trump. Instead, it's a deeply illuminating stress test on our laws, our institutions, and on the commitment to democracy written into the constitution. This episode was reported by Bethel Habte, with help from Tracie Hunte, and produced by Bethel Habte. Jeremy Bloom provided original music. Support Radiolab by becoming a member today at     You can read The Transition Integrity Project's report here.