Scientists discover formula for long-life rechargeable batteries

July 26, 2001

UPTON, NY -- If you're tired of cell phones and laptops that quickly lose their charge -- or worse, their ability to be recharged -- help may be on the way from the U.S. Department of Energy's Brookhaven National Laboratory. There, BNL scientists James Reilly, Gordana Adzic, John Johnson, Thomas Vogt, and James McBreen have developed a new metal alloy that could greatly improve the performance of rechargeable batteries for portable electronic devices and electric and hybrid electric cars. The Brookhaven team was recently awarded U.S. Patent No. 6,238,823 for its work on the alloy.

When used as an electrode in nickel/metal hydride (Ni/MHx) batteries -- the most popular rechargeables -- the alloy has a high capacity for storing charge, a long-lasting ability to be charged and recharged, and good resistance to corrosion. Furthermore, the alloy contains no cobalt, an expensive metal found in many Ni/MHx batteries, and no cadmium, a toxic metal found in nickel-cadmium rechargeables. Composed of lanthanum, nickel, and tin, "this new alloy is inexpensive and relatively environmentally benign," said Reilly, the team leader.

The alloy is based on a classic formula used for Ni/MHx batteries, which consists of a cube-like lattice with lanthanum atoms on the corners and nickel on the inside. The electrode works by storing up hydrogen atoms (from the electrolyte) in the spaces between the atoms during charging, and releasing them into the electrolyte during discharge.

But the added hydrogen atoms have an adverse effect: They cause the crystal lattice to expand, and then contract as the battery discharges. "This expansion and contraction is repeated in each charge/discharge cycle of the battery," said Reilly, "which pulverizes the alloy into small particles that are more susceptible to corrosion. That's why batteries don't recharge an infinite number of times. Eventually corrosion takes over."

Through trial and error, scientists originally found that using a mixture of metals, including cobalt, in place of nickel helps the electrode resist this tendency to break apart and corrode. But even small amounts of cobalt can drive up the cost of batteries considerably. For batteries of the sizes needed in electric vehicles, the cost can be prohibitive. So scientists have been trying to understand the role cobalt plays -- and find ways to replace it.

That's what the Brookhaven scientists were doing when they were investigating several relatively simple, cobalt-free alloys. They found a combination of lanthanum, nickel, and tin with a very high storage capacity that didn't decay over many charge/discharge cycles. This surprised the scientists, because normally, combinations of these atoms in the classic ratio of one lanthanum atom to five of the other atoms decayed rather quickly.

As it turns out, there was a mistake. Accidentally, the scientists had added a bit more of the nickel/tin combo, so that the ratio of atoms was no longer 1 lanthanum to 5 nickel or tin, but 1 to 5.157. That small difference in the ratio of the ingredients made a big difference in performance. The superior performance was then confirmed in a further series of experiments, carried out by Adzic and Johnson, with other 1 lanthanum/ 5+ nickel/tin combinations.

Vogt then studied the lattice structure at Brookhaven's National Synchrotron Light Source to figure out where the extra atoms went. By beaming samples of the material with high-intensity x-rays and looking at how the beam scattered, he determined that "dumbbells" made of two nickel atoms were replacing some of the lanthanum atoms on the cube corners.

These nickel dumbbells make the structure more compact, said Vogt, which decreases somewhat its ability to store hydrogen, and therefore its initial charge capacity relative to the classic 1-5 formula. But it also decreases the alloy's tendency to corrode, therefore increasing its life-span. The result is that the long-term energy-storage capacity of this new alloy exceeds that of cobalt alloys used in commercial batteries.
-end-
This work was funded by the U.S. Department of Energy, which supports basic research in a variety of scientific fields.

The U.S. Department of Energy's Brookhaven National Laboratory conducts research in the physical, biomedical, and environmental sciences, as well as in energy technologies. Brookhaven also builds and operates major facilities available to university, industrial, and government scientists. The Laboratory is managed by Brookhaven Science Associates, a limited liability company founded by Stony Brook University and Battelle, a nonprofit applied science and technology organization.

Note to local editors: James Reilly lives in Bellport, New York.

DOE/Brookhaven National Laboratory

Related Batteries Articles from Brightsurf:

New research says Sodium-ion batteries are a valid alternative to Lithium-ion batteries
A team of scientists including WMG at the University of Warwick combined their knowledge and expertise to assess the current status of the Na-ion technology from materials to cell development, offering a realistic comparison of the key performance indicators for NBs and LIBs.

Fast calculation dials in better batteries
A simpler and more efficient way to predict the performance of batteries will lead to better batteries, according to Rice University engineers.

Building the batteries of cells
A new study, led by Dr. Ruchika Anand and Prof.

Researchers create a roadmap to better multivalent batteries
Lithium-ion batteries power everything from mobile phones to laptop computers and electric vehicles, but demand is growing for less expensive and more readily available alternatives.

New NiMH batteries perform better when made from recycled old NiMH batteries
A new method for recycling old batteries can provide better performing and cheaper rechargeable hydride batteries (NiMH) as shown in a new study by researchers at Stockholm University.

Seeing 'under the hood' in batteries
A high-sensitivity X-ray technique at Berkeley Lab is attracting a growing group of scientists because it provides a deep, precise dive into battery chemistry.

Better, safer batteries
For the first time, researchers who explore the physical and chemical properties of electrical energy storage have found a new way to improve lithium-ion batteries.

New catalyst provides boost to next-generation EV batteries
A recent study, affiliated with South Korea's Ulsan National Institute of Science and Technology (UNIST) has introduced a new composite catalyst that could efficiently enhance the charg-discharge performances when applied to metal-air batteries (MABs).

New lithium batteries from used cell phones
Research from the University of Cordoba (Spain) and San Luis University (Argentina) was able to reuse graphite from cell phones to manufacture environmentally friendly batteries.

Safe potassium-ion batteries
Australian scientists have developed a nonflammable electrolyte for potassium and potassium-ion batteries, for applications in next-generation energy-storage systems beyond lithium technology.

Read More: Batteries News and Batteries Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.