U of I research seeks to improve sensors that monitor diesel fuel quality

July 26, 2010

URBANA - Sensors currently used to monitor the quality of diesel fuel and biodiesel blended fuels during engine operation are unable to adequately detect certain important fuel quality concerns. Alan Hansen, professor of agricultural and biological engineering at the University of Illinois, and his colleagues are working to develop new technologies to improve these commercially-available sensors.

"Our research is contributing to the development of a sensor that, when placed in the fuel line prior to where the fuel enters a diesel engine, can detect if there are any contaminants in or other problems with the fuel," Hansen said. "Also, if biodiesel is used, the sensor would determine the quality and quantity of biodiesel entering the engine."

Biodiesel, a renewable fuel derived from natural oils like soybean oil, is typically blended at 2 to 5 percent with regular diesel fuel.

"In some cases, engine manufacturers will support warranties on engines using higher percentages of biodiesel--up to 20 percent. However, they are reluctant to support engines running too much biodiesel because there is some concern that it would affect the engine in a negative way," Hansen said.

Hansen is investigating the use of electrochemical sensors to detect contaminants and other quality issues that today's sensors are missing. By using electrochemical processes, the sensors are expected to be significantly more sensitive to the chemical composition of diesel fuel.

"Electrochemical sensors can be designed to detect specific chemicals, such as sulfur or sulfur-based compounds," he said. "One could then create a system to warn the operator or shut down the engine when the fuel has high sulfur content."

Sulfur is an important contaminant to monitor in diesel fuel, as it can contribute to the release of harmful exhaust emissions. Sulfur damages the catalysts in filters that are part of the engine's after-treatment system. Such filters are needed to comply with the Environmental Protection Agency's (EPA) strict regulations on emissions levels.

"To stay within the EPA's emissions limits, it is no longer possible to simply optimize the combustion process. We now have to capture some of the emissions after the engine, using filters or other methods," Hansen said.

Hansen also noted that when sulfur is involved in the combustion process, it creates sulfuric acid, which is a very corrosive by-product that can damage the engine.

"We've run tests to evaluate how well current sensors work with a range of different fuels, including biodiesel blends. The tests have shown us the limitations of the sensors," Hansen said. "If we can improve these sensors to successfully detect sulfur and monitor other diesel fuel quality concerns, it will be an important breakthrough."
-end-


University of Illinois College of Agricultural, Consumer and Environmental Sciences

Related Biodiesel Articles from Brightsurf:

Making biodiesel from dirty old cooking oil just got way easier
Researchers develop a new sponge-like catalyst that is so tough it can make biodiesel from low-grade ingredients containing up to 50% contaminants.

Success in promoting plant growth for biodiesel
Scientists of Waseda University in Japan succeeded in promoting plant growth and increasing seed yield by heterologous expression of protein from Arabidopsis (artificially modified high-speed motor protein) in Camelina sativa, which is expected as a useful plant for biodiesel.

Lithium ion battery waste used in biodiesel production from discarded vegetable oil
Brazilian researchers demonstrated a new chemical approach for producing biodiesel from domestic cooking oil waste by using hydroxide lithium mixed with either sodium hydroxides or potassium hydroxides as catalysts.

Eco-friendly biodiesel from palm oil?
Vegetable oil biofuels are increasingly used as an alternative to fossil fuels despite the growing controversy regarding their sustainability.

Towards sustainability -- from a by-product of the biodiesel industry to a valuable chemical
Scientists at Tokyo Institute of Technology (Tokyo Tech) and the National Taiwan University of Science and Technology (Taiwan Tech) develop a cheap and efficient copper-based catalyst that can be used to convert glycerol, one of the main by-products of the biodiesel industry, into a valuable compound called dihydroxyacetone.

Efficiently producing fatty acids and biofuels from glucose
Researchers have presented a new strategy for efficiently producing fatty acids and biofuels that can transform glucose and oleaginous microorganisms into microbial diesel fuel, with one-step direct fermentative production.

Using E. coli to create bioproducts, like biodiesel, in a cost-effective manner
LSU mechanical engineering graduate student Tatiana Mello of Piracicaba, Brazil, is currently working on genetically engineering and optimizing E. coli bacteria to produce bioproducts, like biodiesel, in a cost-effective manner.

Metal-free catalyst extends the range of ester synthesis
A Japanese research team at Nagoya University created a versatile, metal-free catalyst for trans-esterification.

Researchers produce biofuel for conventional diesel engines
In accordance with an EU directive, conventional automotive diesel is supplemented with seven percent biodiesel.

New breakthrough makes it easier to turn old coffee waste into cleaner biofuels
Future Americano, cappuccino and latte drinkers could help produce the raw material for a greener biofuel that would reduce our reliance on diesel from fossil fuels.

Read More: Biodiesel News and Biodiesel Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.