NIST's SAMURAI measures 5G communications channels precisely

August 10, 2020

Engineers at the National Institute of Standards and Technology (NIST) have developed a flexible, portable measurement system to support design and repeatable laboratory testing of fifth-generation (5G) wireless communications devices with unprecedented accuracy across a wide range of signal frequencies and scenarios.

The system is called SAMURAI, short for Synthetic Aperture Measurements of Uncertainty in Angle of Incidence. The system is the first to offer 5G wireless measurements with accuracy that can be traced to fundamental physical standards -- a key feature because even tiny errors can produce misleading results. SAMURAI is also small enough to be transported to field tests.

Mobile devices such as cellphones, consumer Wi-Fi devices and public-safety radios now mostly operate at electromagnetic frequencies below 3 gigahertz (GHz) with antennas that radiate equally in all directions. Experts predict 5G technologies could boost data rates a thousandfold by using higher, "millimeter-wave" frequencies above 24 GHz and highly directional, actively changing antenna patterns. Such active antenna arrays help to overcome losses of these higher-frequency signals during transmission. 5G systems also send signals over multiple paths simultaneously -- so-called spatial channels -- to increase speed and overcome interference.

Many instruments can measure some aspects of directional 5G device and channel performance. But most focus on collecting quick snapshots over a limited frequency range to provide a general overview of a channel, whereas SAMURAI provides a detailed portrait. In addition, many instruments are so physically large that they can distort millimeter-wave signal transmissions and reception.

Described at a conference on Aug. 7, SAMURAI is expected to help resolve many unanswered questions surrounding 5G's use of active antennas, such as what happens when high data rates are transmitted across multiple channels at once. The system will help improve theory, hardware and analysis techniques to provide accurate channel models and efficient networks.

"SAMURAI provides a cost-effective way to study many millimeter-wave measurement issues, so the technique will be accessible to academic labs as well as instrumentation metrology labs," NIST electronics engineer Kate Remley said. "Because of its traceability to standards, users can have confidence in the measurements. The technique will allow better antenna design and performance verification, and support network design."

SAMURAI measures signals across a wide frequency range, currently up to 50 GHz, extending to 75 GHz in the coming year. The system got its name because it measures received signals at many points over a grid or virtual "synthetic aperture." This allows reconstruction of incoming energy in three dimensions -- including the angles of the arriving signals -- which is affected by many factors, such as how the signal's electric field reflects off of objects in the transmission path.

SAMURAI can be applied to a variety of tasks from verifying the performance of wireless devices with active antennas to measuring reflective channels in environments where metallic objects scatter signals. NIST researchers are currently using SAMURAI to develop methods for testing industrial Internet of Things devices at millimeter-wave frequencies.

The basic components are two antennas to transmit and receive signals, instrumentation with precise timing synchronization to generate radio transmissions and analyze reception, and a six-axis robotic arm that positions the receive antenna to the grid points that form the synthetic aperture. The robot ensures accurate and repeatable antenna positions and traces out a variety of reception patterns in 3D space, such as cylindrical and hemispherical shapes. A variety of small metallic objects such as flat plates and cylinders can be placed in the test setup to represent buildings and other real-world impediments to signal transmission. To improve positional accuracy, a system of 10 cameras is also used to track the antennas and measure the locations of objects in the channel that scatter signals.

The system is typically attached to an optical table measuring 5 feet by 14 feet (1.5 meters by 4.3 meters). But the equipment is portable enough to be used in mobile field tests and moved to other laboratory settings. Wireless communications research requires a mix of lab tests -- which are well controlled to help isolate specific effects and verify system performance -- and field tests, which capture the range of realistic conditions.

Measurements can require hours to complete, so all aspects of the (stationary) channel are recorded for later analysis. These values include environmental factors such as temperature and humidity, location of scattering objects, and drift in accuracy of the measurement system.

The NIST team developed SAMURAI with collaborators from the Colorado School of Mines in Golden, Colorado. Researchers have verified the basic operation and are now incorporating uncertainty due to unwanted reflections from the robotic arm, position error and antenna patterns into the measurements.
Paper: A.J. Weiss, J. Quimby, R. Leonhardt, B. Jamroz, D. Williams, K.A. Remley, P. Vouras and A. Elsherbeni. Setup and Control of a Millimeter-Wave Synthetic Aperture Measurement System with Uncertainties. Presented August 7, 2020, at the 95th ARFTG Microwave Measurement Conference

National Institute of Standards and Technology (NIST)

Related Robotic Arm Articles from Brightsurf:

Research lowers errors for using brain signals to control a robot arm
Brain-computer interfaces have seen a large influx of research in an effort to allow precise and accurate control of physical systems.

Exercising one arm has twice the benefits
New research from Edith Cowan University (ECU) has revealed that training one arm can improve strength and decrease muscle loss in the other arm - without even moving it.

Mind-controlled arm prostheses that 'feel' are now a part of everyday life
For the first time, people with arm amputations can experience sensations of touch in a mind-controlled arm prosthesis that they use in everyday life.

The right thumb becomes the left arm
Researchers from Toyohashi University of Technology, University of Tokyo and Keio University have revealed that a re-association of the right thumb with the virtual left arm could be induced by visuo-motor synchronization.

The long arm of childhood conditions
Available research on the impact of a person's socioeconomic status during childhood suggests that the circumstances one grows up in matter a great deal for adult health.

New haptic arm places robotics within easy reach
Imagine being able to build and use a robotic device without the need for expensive, specialist kit or skills.

Artificial intelligence controls robotic arm to pack boxes and cut costs
Rutgers computer scientists used artificial intelligence to control a robotic arm that provides a more efficient way to pack boxes, saving businesses time and money.

Robot arm tastes with engineered bacteria
A robotic gripping arm that uses engineered bacteria to 'taste' for a specific chemical has been developed by engineers at UC Davis and Carnegie Mellon University.

First-ever successful mind-controlled robotic arm without brain implants
A team of researchers from Carnegie Mellon University has made a breakthrough in the field of noninvasive robotic device control.

Up in arms: Insect-inspired arm technology aims to improve drones
Insect-inspired arm technology from Purdue University aims to improve drones to handle larger payloads.

Read More: Robotic Arm News and Robotic Arm Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to