Fabrication of a single-crystal giant magnetoresistive device on a polycrystalline film

August 27, 2020

NIMS and AIST have jointly succeeded in fabricating a giant magnetoresistive (GMR) device comprising single-crystal Heusler alloys on an practical silicon substrate. The team demonstrated for the first time that a single-crystal magnetoresistive device can be bonded onto the surface of a polycrystalline electrode using a wafer bonding technique. The fabrication of high-performance single-crystal devices has proven challenging, and these results may provide new guidance in the development of larger capacity hard disk drives (HDDs).

Some Heusler alloys (e.g., Co2MnSi) are known to possess half metallic property?substances that act as conductors to electrons of only one spin orientation when their atoms are in an orderly arrangement. In previous research, a high-quality GMR device was fabricated using half-metallic Heusler alloys. This device was reported to exhibit an extremely large magnetoresistance ratio, a characteristic vital to the development of hard disk read heads compatible with HDDs with nearly five times the recording density of current HDDs. However, the fabrication of this GMR device required the use of a heat-resistant single-crystal magnesium oxide (MgO) substrate with an appropriate lattice structure, which is considerably more costly than using the industrially established small MgO substrate. In addition, HDD read heads need to be fabricated on a polycrystalline magnetic shield, despite the fact that it is impossible to grow a single-crystal device directly on the surface of a polycrystalline film with crystal grains having various lattice orientations. Moreover, Heusler alloys have to be annealed at a temperature of at least 300°C to form an orderly atomic ordering. However, this annealing process also damages the magnetic shield layer. These issues have prevented practical applications of GMR devices comprising single-crystal Heusler alloys.

This research team deposited a NiAl/CoFe buffer layer on the surface of a conventional, inexpensive silicon substrate and discovered that the substrate acquired significantly increased heat resistance and a smoother surface. The team then fabricated a GMR device comprising single-crystal Heusler alloys on the silicon substrate and confirmed that the device performs comparably to the GMR device grown on the MgO substrate. The team also grew a polycrystalline electrode film on the surface of another substrate and fabricated a GMR film device comprising single-crystal Heusler alloys on it. The team subsequently bonded the fabricated GMR film device onto a wafer using the latest three-dimensional integration technology. Through these processes, the team formed an extremely smooth, defect-free bonded interface between the polycrystalline and single crystal films by optimizing wafer bonding conditions. The team also confirmed that bonding the fabricated GMR film device onto a wafer did not negatively affect the device's magnetoresistive performance. The techniques the team developed are expected to eliminate the need to grow a single-crystal magnetoresistive device directly on a polycrystalline electrode film and completely resolve the damage issue caused by high-temperature treatment.

These techniques are applicable not only to the fabrication of GMR devices comprising single-crystal Heusler alloys but also for various other purposes, such as the integration of single-crystal tunneling magnetoresistance devices--another potentially promising high-performance technology--onto a heat-susceptible circuit board. The use of these techniques may promote practical use of high-performance single-crystal spintronic devices, thereby potentially contributing to the development of larger capacity HDDs and magnetoresistive random access memory.
-end-
This project was carried out by a joint research team consisting of Yuya Sakuraba (Group Leader, Research Center for Magnetic and Spintronic Materials, NIMS), his NIMS colleagues, Kay Yakushiji (Team Leader, Spintronics Research Center, AIST), Hideki Takagi (Principal Research Manager, Device Technology Research Institute, AIST) and Katsuya Kikuchi (Group Leader, Device Technology Research Institute, AIST).

This work was conducted in conjunction with another research project entitled "Achieving ultimate green IT devices with long usage time without charging" (Program Manager: Masashi Sahara) funded by the Impulsing Paradigm Change through Disruptive Technologies Program (ImPACT).

This research was published in the online version of Acta Materialia at 9:00 am on May 28, 2020, UTC (6:00 pm on May 28, Japan Time).

Contacts

(Regarding this research)

Yuya Sakuraba
Group Leader,
Magnetic Materials Group,
Research Center for Magnetic and Spintronic Materials
National Institute for Materials Science (NIMS)
Tel: +81-29-859-2708
E-Mail: SAKURABA.Yuya=nims.go.jp
(Please change "=" to "@")
URL: https://www.nims.go.jp/mmu/index.html

Kay Yakushiji
Leader of the Metal Spintronics Team
Spintronics Research Center
National Institute of Advanced Industrial Science and Technology (AIST)
Tel: +81-29-861-3251
Email: k-yakushiji=aist.go.jp
(Please change "=" to "@")

Hideki Takagi
Principal Research Manager, Device Technology Research Institute
National Institute of Advanced Industrial Science and Technology (AIST)
Tel: +81-29-861-7217
Email: takagi.hideki=aist.go.jp
(Please change "=" to "@")

Katsuya Kikuchi
Leader of the 3D Integration System Group
Device Technology Research Institute
National Institute of Advanced Industrial Science and Technology (AIST)
Tel: +81-29-861-3454
Email: k-kikuchi=aist.go.jp
(Please change "=" to "@")

(General information)

Public Relations Office
National Institute for Materials Science
Tel: +81-29-859-2026, Fax: +81-29-859-2017
Email: pressrelease=ml.nims.go.jp
(Please change "=" to "@")

Media Relations Office

Planning Headquarters
National Institute of Advanced Industrial Science and Technology (AIST)
Tel: +81-29-862-6216, Fax: +81-29-862-6212
Email: press-ml=aist.go.jp
(Please change "=" to "@")

National Institute for Materials Science, Japan

Related Bonding Articles from Brightsurf:

Scientists discover new structures in the smallest ice cube
A research team led by Prof. JIANG Ling and Prof.

Halogen bonding: a powerful tool for constructing supramolecular co-crystalline materials
Halogen bonding is emerging as an important driving force for supramolecular self-assembly, and shows great potential in the design and synthesis of new multicomponent supramolecular co-crystalline materials.

Pancake bonding as a new tool to construct novel metal based magnetic materials
A Canadian-Finnish collaboration has led to the discovery of a novel magnetic compound in which two magnetic dysprosium metal ions are bridged by two aromatic organic radicals forming a pancake bond.

Graphene-Adsorbate van der Waals bonding memory inspires 'smart' graphene sensors
Electric field modulation of the graphene-adsorbate interaction induces unique van der Waals (vdW) bonding which were previously assumed to be randomized by thermal energy after the electric field is turned off.

We feel connected when we move together in time with music
Go dancing! A new study conduted at Center for Music in the Brain at Aarhus University, Denmark, suggest that then moving together with music, synchronous movements between individuals increase social closeness.

Every moment of ultrafast chemical bonding now captured on film
IBS scientists report the direct observation of the birthing moment of chemical bonds by tracking real-time atomic positions in the molecule.

Scientists discover three-dimensional structure in smaller water droplet
A research team led by Prof. JIANG Ling and Prof.

Glimpses of fatherhood found in non-pair-bonding chimps
Although they have no way of identifying their biological fathers, male chimpanzees form intimate bonds with them, a finding that questions the idea of fatherhood in some of humanity's closest relatives, according to a study of wild chimpanzees in Uganda.

Stretchy and squeezy soft sensors one step closer thanks to new bonding method
Imperial College London bioengineers have found a way to create stretchy and squeezy soft sensing devices by bonding rubber to electrical components.

Parents' behavior influences bonding hormone oxytocin in babies
A new epigenetic study suggests that mothers' behavior can also have a substantial impact on their children's developing oxytocin systems.

Read More: Bonding News and Bonding Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.