New breakthrough: Photomultiplication type all-polymer photodetectors with single carrier transport

September 08, 2019

Recent technological advancement has seen the development and utilization of photodetectors in different applications, including biological detection and image sensing. Polymer photodetectors (PPDs), in particular, have attracted significant attention owing to the numerous desirable properties and technological advantages of polymer semiconductors, i.e., adjustable energy levels, mechanical flexibility, large-area fabrication, solution process, and low cost. The photodiode type PPDs obeying photovoltaic effect exhibit external quantum efficiency (EQE) of less than 100%, which limits their applications in weak light detection. Thus researchers have been looking for better alternatives and have identified photomultiplication (PM) type PPDs as a promising direction. PM phenomenon is desirable for sensitive photodetectors with strong detection capability of weak light, which can avoid the use of complex pre-amplifier circuit, simplify the design of photo-detection systems and benefit the development of integrated optoelectronic products.

In 2015, Professor Fujun Zhang's group from Beijing Jiaotong University firstly reported the PM type PPDs with P3HT:PCBM (100:1, wt/wt) as active layers, processing single carrier transport property. This PM type PPDs exhibit EQE of >>100% and low dark current density. Subsequently, tremendous efforts on PM type PPDs were devoted in the performance improvement, response spectral range regulation, and function expansion. The reported PM type PPDs with single carrier transport property are primarily based on polymer donor P3HT system. It is urgent to explore new polymer material systems with PM phenomenon, which will further confirm the universality of PM type PPDs with single carrier transport property.

Recently, Professor Fujun Zhang's group developed the PM type PPDs with single carrier transport property, demonstrating the PM type all-polymer photodetectors (all-PPDs) with the sandwich structure of ITO/PEDOT:PSS/PBDB-T:PZ1 (100:x, wt/wt)/Al (Figure 1a).

The optimal all-PPDs with PBDB-T:PZ1 (100:1, wt/wt) as active layers exhibit EQE exceed 100% in the spectral range from 310 to 790 nm. Under 675 nm light illumination, the champion EQE value arrives to 1470%. The photogenerated electron distribution in active layer was simulated by using Transfer Matrix method.

The normalized response spectrum of PM type all-PPDs and normalized photogenerated electron distribution near the Al electrode are exhibited in Figure 1b, which further indicates that the working mechanism of PM type all-PPDs is hole tunneling injection assisted by interfacial band bending induced by trapped electrons in PZ1 near Al electrode. When the number of holes flowing through the all-PPDs is greater than the number of incident photons per unit time, the EQE values will be larger than 100%, leading to the PM phenomenon.

This work further confirms the universality of PM type PPDs with single carrier transport property, which would promote the exploration of new polymer semiconductors and the design of new device architectures to realize high performance PM type PPDs, meeting the need of versatility in integrated optoelectronic products.
-end-
This research was funded by the Fundamental Research Funds for the Central Universities (2019YJS207).

See the article: Miao J, Du M, Fang Y, Zhang X, Zhang F. Photomultiplication type all-polymer photodetectors with single carrier transport property. Sci. China Chem., 2019, DOI: 10.1007/s11426-019-9582-7. https://link.springer.com/article/10.1007/s11426-019-9582-7

Science China Press

Related Photodetectors Articles from Brightsurf:

Optoelectronic detectors capable of perceiving light intensity and color
Current optoelectronic detectors are only able to perceive light intensities.

Cascade amplified upconversion luminescence facilitating narrow band NIR photodetection
Facing the fact that selective detection of multiple narrow spectral bands in the near-infrared (NIR) region still poses a fundamental challenge.

Research lays groundwork for ultra-thin, energy efficient photodetector on glass
Though we may not always realize it, photodetectors contribute greatly to the convenience of modern life.

Scientists develop method to detect charge traps in organic semiconductors
Scientists at Swansea University have developed a very sensitive method to detect the tiny signatures of so called 'charge traps' in organic semiconductors.

A versatile photodetector assisted by photovoltaic and bolometric effects
A versatile photodetector based on MoTe2/VO2 heterostructure integrates photovoltaic and bolometric effects.

Scientists develop detector for investigating the sun
Researchers from MIPT have developed a prototype detector of solar particles.

Thin and ultra-fast photodetector sees the full spectrum
Researchers have developed the world's first photodetector that can see all shades of light, in a prototype device that radically shrinks one of the most fundamental elements of modern technology.

CU student helps bridge teams at Clemson
Three teams of researchers at Clemson University have joined forces to unravel some of the mysteries surrounding perovskite nanocrystals, which are semiconductors with numerous applications, including LEDs, lasers, solar cells and photodetectors.

Coffee stains inspire optimal printing technique for electronics
Using an alcohol mixture, researchers modified how ink droplets dry, enabling cheap industrial-scale printing of electronic devices at unprecedented scales.

Strainoptronics: A new way to control photons
Researchers discovered a new way to engineer optoelectronic devices by stretching a two-dimensional material on top of a silicon photonic platform.

Read More: Photodetectors News and Photodetectors Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.