Quantum light squeezes the noise out of microscopy signals

September 08, 2020

Researchers at the Department of Energy's Oak Ridge National Laboratory used quantum optics to advance state-of-the-art microscopy and illuminate a path to detecting material properties with greater sensitivity than is possible with traditional tools.

"We showed how to use squeezed light - a workhorse of quantum information science - as a practical resource for microscopy," said Ben Lawrie of ORNL's Materials Science and Technology Division, who led the research with Raphael Pooser of ORNL's Computational Sciences and Engineering Division. "We measured the displacement of an atomic force microscope microcantilever with sensitivity better than the standard quantum limit."

Unlike today's classical microscopes, Pooser and Lawrie's quantum microscope requires quantum theory to describe its sensitivity. The nonlinear amplifiers in ORNL's microscope generate a special quantum light source known as squeezed light.

"Imagine a blurry picture," Pooser said. "It's noisy and some fine details are hidden. Classical, noisy light prevents you from seeing those details. A 'squeezed' version is less blurry and reveals fine details that we couldn't see before because of the noise." He added, "We can use a squeezed light source instead of a laser to reduce the noise in our sensor readout."

The microcantilever of an atomic force microscope is a miniature diving board that methodically scans a sample and bends when it senses physical changes. With student interns Nick Savino, Emma Batson, Jeff Garcia and Jacob Beckey, Lawrie and Pooser showed that the quantum microscope they invented could measure the displacement of a microcantilever with 50% better sensitivity than is classically possible. For one-second long measurements, the quantum-enhanced sensitivity was 1.7 femtometers - about twice the diameter of a carbon nucleus.

"Squeezed light sources have been used to provide quantum-enhanced sensitivity for the detection of gravitational waves generated by black hole mergers," Pooser said. "Our work is helping to translate these quantum sensors from the cosmological scale to the nanoscale."

Their approach to quantum microscopy relies on control of waves of light. When waves combine, they can interfere constructively, meaning the amplitudes of peaks add to make the resulting wave bigger. Or they can interfere destructively, meaning trough amplitudes subtract from peak amplitudes to make the resulting wave smaller. This effect can be seen in waves in a pond or in an electromagnetic wave of light like a laser.

"Interferometers split and then mix two light beams to measure small changes in phase that affect the interference of the two beams when they are recombined," Lawrie said. "We employed nonlinear interferometers, which use nonlinear optical amplifiers to do the splitting and mixing to achieve classically inaccessible sensitivity."

The interdisciplinary study, which is published in Physical Review Letters, is the first practical application of nonlinear interferometry.

A well-known aspect of quantum mechanics, the Heisenberg uncertainty principle, makes it impossible to define both the position and momentum of a particle with absolute certainty. A similar uncertainty relationship exists for the amplitude and phase of light.

That fact creates a problem for sensors that rely on classical light sources like lasers: The highest sensitivity they can achieve minimizes the Heisenberg uncertainty relationship with equal uncertainty in each variable. Squeezed light sources reduce the uncertainty in one variable while increasing the uncertainty in the other variable, thus "squeezing" the uncertainty distribution. For that reason, the scientific community has used squeezing to study phenomena both great and small.

The sensitivity in such quantum sensors is typically limited by optical losses. "Squeezed states are fragile quantum states," Pooser said. "In this experiment, we were able to circumvent the problem by exploiting properties of entanglement." Entanglement means independent objects behaving as one. Einstein called it "spooky action at a distance." In this case, the intensities of the light beams are correlated with each other at the quantum level.

"Because of entanglement, if we measure the power of one beam of light, it would allow us to predict the power of the other one without measuring it," he continued. "Because of entanglement, these measurements are less noisy, and that provides us with a higher signal to noise ratio."

ORNL's approach to quantum microscopy is broadly relevant to any optimized sensor that conventionally uses lasers for signal readout. "For instance, conventional interferometers could be replaced by nonlinear interferometry to achieve quantum-enhanced sensitivity for biochemical sensing, dark matter detection or the characterization of magnetic properties of materials," Lawrie said.
The title of the paper is "Truncated nonlinear interferometry for quantum enhanced atomic force microscopy."

The DOE Office of Science and ORNL's Laboratory Directed Research and Development Program supported the research.

UT-Battelle manages ORNL for DOE's Office of Science. The single largest supporter of basic research in the physical sciences in the United States, the Office of Science is working to address some of the most pressing challenges of our time. For more information, please visit https://www.energy.gov/science/.

ORNL researchers developed a quantum, or squeezed, light approach for atomic force microscopy that enables measurement of signals otherwise buried by noise. Credit: Raphael Pooser, ORNL, U.S. Dept. of Energy

DOE/Oak Ridge National Laboratory

Related Microscopy Articles from Brightsurf:

Ultracompact metalens microscopy breaks FOV constraints
As reported in Advanced Photonics, their metalens-integrated imaging device (MIID) exhibits an ultracompact architecture with a working imaging distance in the hundreds of micrometers.

Attosecond boost for electron microscopy
A team of physicists from the University of Konstanz and Ludwig-Maximilians-Universität München in Germany have achieved attosecond time resolution in a transmission electron microscope by combining it with a continuous-wave laser -- new insights into light-matter interactions.

Microscopy beyond the resolution limit
The Polish-Israeli team from the Faculty of Physics of the University of Warsaw and the Weizmann Institute of Science has made another significant achievement in fluorescent microscopy.

Quantum light squeezes the noise out of microscopy signals
Researchers at the Department of Energy's Oak Ridge National Laboratory used quantum optics to advance state-of-the-art microscopy and illuminate a path to detecting material properties with greater sensitivity than is possible with traditional tools.

Limitations of super-resolution microscopy overcome
The smallest cell structures can now be imaged even better: The combination of two microscopy methods makes fluorescence imaging with molecular resolution possible for the first time.

High-end microscopy refined
New details are known about an important cell structure: For the first time, two Würzburg research groups have been able to map the synaptonemal complex three-dimensionally with a resolution of 20 to 30 nanometres.

Developing new techniques to improve atomic force microscopy
Researchers from the University of Illinois at Urbana-Champaign have developed a new method to improve the noise associated with nanoscale chemical imaging using atomic force microscopy.

New discovery advances optical microscopy
New Illinois ECE research is advancing the field of optical microscopy, giving the field a critical new tool to solve challenging problems across many fields of science and engineering including semiconductor wafer inspection, nanoparticle sensing, material characterization, biosensing, virus counting, and microfluidic monitoring.

New microscopy method provides unprecedented look at amyloid protein structure
Neurodegenerative diseases such as Alzheimer's and Parkinson's are often accompanied by amyloid proteins in the brain that have become clumped or misfolded.

Novel 3D imaging technology makes fluorescence microscopy more efficient
A research team led by Dr Kevin Tsia from the University of Hong Kong (HKU), developed a new optical imaging technology -- Coded Light-sheet Array Microscopy (CLAM) -- which can perform 3D imaging at high speed, and is power efficient and gentle to preserve the living specimens during scanning at a level that is not achieved by existing technologies.

Read More: Microscopy News and Microscopy Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.