Brazilian researcher creates an ultra-simple inexpensive method to fabricate optical fiber

September 10, 2020

A novel process to fabricate special optical fiber that is far simpler, faster and cheaper than the conventional method has been developed by Cristiano Cordeiro, a researcher and professor at the University of Campinas's Physics Institute (IFGW-Unicamp) in the state of São Paulo, Brazil. Cordeiro created the innovation during a research internship at the University of Adelaide in Australia, supported by a scholarship from São Paulo Research Foundation - FAPESP and by a partnership with his host, Heike Ebendorff-Heidepriem. An article signed by them and a third collaborator is published in Scientific Reports.

"The conventional process requires very large and expensive machinery and takes almost a week. Our process can be completed with bench-mounted equipment that's at least 100 times cheaper and takes less than an hour from feedstock to end-product. It will enable many more researchers and labs to produce their own optical fiber," Cordeiro told.

The procedure roughly resembles the extrusion method used to produce pasta: pressure is brought to bear on a ductile material so as to force it through a die, producing fiber with the appropriate inner structure. "Of course, this is all done with much more rigor and precision," Cordeiro said.

Hundreds of millions of kilometers of optical fiber are installed worldwide, and the amount of data they transport doubles approximately every two years. They are used not only in telecommunications but also for remote sensing to monitor temperature, mechanical stress, hydrostatic pressure, or fluid flow, among many other parameters.

Thanks to their strength and thinness they are effective in hostile environments and barely accessible locations.

These features help explain the importance of innovative fabrication processes. "The conventional process has several stages and requires highly complex equipment, such as a fiber drawing tower," Cordeiro said. "First a preform is produced, a giant version of the fiber with a diameter of between 2 cm and 10 cm. This structure is heated and drawn in a highly controlled manner by the tower. Mass is conserved and diameter decreases as length increases. Our method simplifies the process at an enormously reduced cost. The device we designed carries out a single continuous process starting with polymer pellets and ending with the finished fiber."

The procedure can be used to fabricate not only all-solid fiber, in which light is transmitted via a core with a higher refractive index but also microstructured fiber containing an array of longitudinal holes, which enhances optical properties control and brings an increase in functionality - including the opportunity to guide light with low energy loss in an air channel. To create the microstructures, the researchers used titanium dies with suitable designs.

"To simplify the fabrication of special optical fiber, we deployed equipment and techniques that are becoming more affordable and accessible thanks to the popularization of 3D printing," Cordeiro said. "The only machine required is a compact horizontal extruder similar to the device used to produce filament for 3D printers. It's about the size of a microwave oven and is far less costly than a draw tower. The titanium die with solid parts and holes is coupled to the extruder exit."

Owing to the fiber's intricate inner structure, the researchers produced the dies by additive manufacturing using appropriate 3D printers. Specialist firms can provide additive manufacturing services, so the only item of equipment need to produce the fiber is the horizontal extruder.
About São Paulo Research Foundation (FAPESP)

The São Paulo Research Foundation (FAPESP) is a public institution with the mission of supporting scientific research in all fields of knowledge by awarding scholarships, fellowships and grants to investigators linked with higher education and research institutions in the State of São Paulo, Brazil. FAPESP is aware that the very best research can only be done by working with the best researchers internationally. Therefore, it has established partnerships with funding agencies, higher education, private companies, and research organizations in other countries known for the quality of their research and has been encouraging scientists funded by its grants to further develop their international collaboration. You can learn more about FAPESP at and visit FAPESP news agency at to keep updated with the latest scientific breakthroughs FAPESP helps achieve through its many programs, awards and research centers. You may also subscribe to FAPESP news agency at

Fundação de Amparo à Pesquisa do Estado de São Paulo

Related Optical Fiber Articles from Brightsurf:

Graphene controls laser frequency combs in fiber
Tuning laser frequency combs electrically can enrich diversity of comb outputs and help to stabilize them actively.

Asymmetric optical camouflage: Tuneable reflective color accompanied by optical Janus effect
Deliverying viewing-direction sensitive information display across single sheet of transreflective window is introduced.

Revealing the reason behind jet formation at the tip of laser optical fiber
When an optical fiber is immersed in liquid, a high temperature, high speed jet is discharged.

Rochester researchers document an optical fiber beyond compare
A new anti-resonant hollow core optical fiber produces a thousand times less ''noise'' interfering with signals it transmits compared to the single-mode fibers now widely used.

Brazilian researcher creates an ultra-simple inexpensive method to fabricate optical fiber
The conventional process requires costly large-scale equipment. The novel method can be executed in a single step by a device no larger than a microwave oven.

How bacteria adhere to fiber in the gut
Researchers have revealed a new molecular mechanism by which bacteria adhere to cellulose fibers in the human gut.

Brazilian researchers develop an optical fiber made of gel derived from marine algae
Edible, biocompatible and biodegradable, these fibers have potential for various medical applications.

A survey on optical memory and optical RAM technologies
The ability to store with light and built promising optical memories has been an intriguing research topic for more than two decades.

All-fiber optical wavelength converter
Wavelength conversion in all-fiber structure has extensive applications in new fiber-laser sources, signal processing, and multi-parameter sensors.

New design could make fiber communications more energy efficient
Researchers say a new discovery on a US Army project for optoelectronic devices could help make optical fiber communications more energy efficient.

Read More: Optical Fiber News and Optical Fiber Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to